A few questions about Test Suite

[mojado]

Hi, I'm new here and I have a few doubts about your great suite of benchmarking.

1) Why my proccessor is no detected correcly? Same case with my memory.
Show the results like this:
http://img31.imagevenue.com/loc853/th_33616_Pantallazos_122_853lo.jpg (http://img31.imagevenue.com/img.php?image=33616_Pantallazos_122_853lo.jpg)


2) Why the sensors not works properly during bench?
$ ./phoronix-test-suite run compliance-sensors

====================================
LM Sensors (Run 1 of 1)
====================================

FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####
LM Sensors:

(VCore, +3.3V, +5V, +12V, CPU Fan, CPU Temp, Sys Temp)

Final: FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####

But the daemon sensors works fine.:S
I try $ phoronix-test-suite sensor-options:
$ ./phoronix-test-suite sensor-options

Monitoring these sensors are as easy as running your normal Phoronix Test Suite commands but at the beginning of the command add: MONITOR=<selected sensors> (example: MONITOR=cpu.temp,cpu.voltage phoronix-test-suite benchmark universe). Below are all of the sensors supported by this version of the Phoronix Test Suite.

Supported Options:
- all
- all.temp
- all.power
- all.voltage
- all.freq
- all.usage
- gpu.temp
- cpu.temp
- sys.temp
- battery.power
- cpu.voltage
- v3.voltage
- v5.voltage
- v12.voltage
- cpu.freq
- gpu.usage
But I don't have to use properly.:(


Use Arch Linux i686 x32 - E7200 @3,6 - 1024 mb Kingston DDR2 800 mhz 4-4-4-12 - HD Seagate 320 gigas S-ATA II - GeForce 7300GT - GA-P35-DS3P


Thanxs in advance.:)

[Michael]

1) Why my proccessor is no detected correcly? Same case with my memory.
Show the results like this:
http://img31.imagevenue.com/loc853/th_33616_Pantallazos_122_853lo.jpg (http://img31.imagevenue.com/img.php?image=33616_Pantallazos_122_853lo.jpg)



Can you paste the output of your /proc/cpuinfo ?


2) Why the sensors not works properly during bench?
$ ./phoronix-test-suite run compliance-sensors====================================
LM Sensors (Run 1 of 1)
====================================

FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####
LM Sensors:

(VCore, +3.3V, +5V, +12V, CPU Fan, CPU Temp, Sys Temp)

Final: FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####

But the daemon sensors works fine.

Can you then paste the output when running the sensors command?

Arch Linux always seems to be problematic with PHP / Phoronix Test Suite.

[mojado]

Thanxs Michael!:)

Can you paste the output of your /proc/cpuinfo ?

$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
stepping : 6
cpu MHz : 3800.059
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm
bogomips : 7606.61
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
stepping : 6
cpu MHz : 3800.059
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm
bogomips : 7603.65
clflush size : 64


Can you then paste the output when running the sensors command?
$ sudo /etc/rc.d/sensors start
$ sensors
it8718-isa-0290
Adapter: ISA adapter
in0: +1.25 V (min = +0.00 V, max = +4.08 V)
in1: +1.94 V (min = +0.00 V, max = +4.08 V)
in2: +3.36 V (min = +0.00 V, max = +4.08 V)
in3: +2.99 V (min = +0.00 V, max = +4.08 V)
in4: +0.11 V (min = +0.00 V, max = +4.08 V)
in5: +0.06 V (min = +0.00 V, max = +4.08 V)
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in7: +3.10 V (min = +0.00 V, max = +4.08 V)
in8: +3.09 V
fan1: 2547 RPM (min = 0 RPM)
fan2: 1271 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = transistor
temp2: +28.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = transistor
cpu0_vid: +2.800 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +31.0°C (high = +76.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +32.0°C (high = +76.0°C, crit = +100.0°C)

$ ./phoronix-test-suite run compliance-sensors

Would you like to save these test results (Y/n)? Y
Enter a name to save these results: sens
Enter a unique identifier for distinguishing this series of tests: 15

====================================
LM Sensors (Run 1 of 1)
====================================

FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####
LM Sensors:

(VCore, +3.3V, +5V, +12V, CPU Fan, CPU Temp, Sys Temp)

Final: FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS

################################################## ####


The PHP GD extension must be loaded in order for the graphs to display!
Results Saved To: /home/jack/.phoronix-test-suite/test-results/sens/composite.xml
Do you want to view the results in your web browser (y/N)?

Thanxs for your help and greetings.(Y)

[Marox]

First i like to thank you for this great piece of software !

While testing around, some things went wrong on my system.

1. phoronix-test-suite benchmark compliance-ogl

the output was:

====================================
GLEW (Run 1 of 1)
====================================

./compliance-ogl: 2: ./glew/bin/glewinfo: not found

################################################## ######
GLEW:

(GL 1.1, GL 1.2, GL 1.3, GL 1.4, GL 1.5, GL 2.0, GL 2.1)

Final: FAIL,FAIL,FAIL,FAIL,FAIL,FAIL,FAIL


obviously the binaries were missing / not compiled on installation, so i compiled it by hand and it works like a charme now.

====================================
GLEW (Run 1 of 1)
====================================

GL_VERSION_1_1: OK
GL_VERSION_1_2: OK
GL_VERSION_1_3: OK
GL_VERSION_1_4: OK
GL_VERSION_1_5: OK
GL_VERSION_2_0: OK
GL_VERSION_2_1: OK

################################################## ######
GLEW:

(GL 1.1, GL 1.2, GL 1.3, GL 1.4, GL 1.5, GL 2.0, GL 2.1)

Final: PASS,PASS,PASS,PASS,PASS,PASS,PASS

################################################## ######



2. phoronix-test-suite benchmark glmark

The version 0.5.2 provided by PTS 1.02 segfaults on my system.
I used 0.5.2.1 from https://sourceforge.net/project/showfiles.php?group_id=224203 which works. But i have to enter the resolution by hand to start glmark like this:

====================================
GLMark (Run 1 of 1)
====================================


800
600
16
0

Vertex buffer object FPS: 1204

####################################
GLMark:
800 x 600 - Vertex Buffer Object

1204 Average FPS

Average: 1204.00 Average FPS
####################################



3. My processor is not detected correctly..
it says Processor: Unknown (Total Cores: 1)

Here is my output of /proc/cpuinfo:


$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) XP 2200+
stepping : 0
cpu MHz : 1804.233
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts
bogomips : 3611.77
clflush size : 32


My systemspecs are:

OS: Xubuntu 8.04
Ram: 512MB
VGA: Ati Radeon 9800pro (latest fglrx)
CPU: Athlon XP 2200+

Keep on your great work!