People willing to test nvclock

[deanjo]

<offtopic>Right now I'm mostly busy with Wine stuff and I'm quite busy. I hope to release a new NVClock sometime but I need a lto of new functionality (fanspeed on more geforce8/9/gtx cards) and other features and I don't have enough testers nor direct access to those cards.</offtopic>

Well if you need testing done 8200/8500/8800GT's don't be afraid to PM.

[KohlyKohl]

<offtopic>Right now I'm mostly busy with Wine stuff and I'm quite busy. I hope to release a new NVClock sometime but I need a lto of new functionality (fanspeed on more geforce8/9/gtx cards) and other features and I don't have enough testers nor direct access to those cards.</offtopic>

8800GTS 512MB here if you need any help.

[Eragon]

8600 GT 512 MB, I would like to test it as well ;)

[deanjo]

Thunderbird, a nvclock dev says he's having issues finding people to test nvclock on newer cards (Gforce 8 series and up). We kinda mucked up a non related thread so I thought I would start a separate thread here. Please list your cards that you have if you are willing to help out.


I have 8200's, 8500. 8800GT's and willing to help out.

[Jupiter]

Am happy to help.

8800 GTX

[merlin-tc]

GeForce GTX 280/PCI/SSE2 here.

I'd be happy to help just let me know.

[MighMoS]

GeForce 9600 GT here.

[joffe]

8800 GTX here.

[NoData]

8800 GTS 640mb SLI here, ready when you are. :)

[antreasgrib]

Gainward bliss 9600 GT 1gb here willing to help out

[bakednoodle]

XFX 8600GT 256MB PCI-E here always willing to help

[unix_epoch]

EVGA 8800GT "Superclocked", 512MB. I'm most interested in solid fan control that doesn't crash when run from a cron job or daemon without X access.

[ustolemyname]

I've got a 8600 GT 1GB

[Thunderbird]

This week I will make some small changes to the cvs version of nvclock to let it dump some interesting fanspeed related registers. After that nvclock -D reports of all cards will be useful.

For now I'm interested in 'nvclock -D' logs of the latest cvs version on 8600gt/8800gt/9600gt cards which at this point don't have fanspeed control using the cvs version (so cards which don't use a ADT7473 sensor).

The cvs version can be obtained using:
cvs -d:pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock login (there is no password, just hit enter)
cvs -z3 -d:pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock co -P nvclock

[deanjo]

This week I will make some small changes to the cvs version of nvclock to let it dump some interesting fanspeed related registers. After that nvclock -D reports of all cards will be useful.

For now I'm interested in 'nvclock -D' logs of the latest cvs version on 8600gt/8800gt/9600gt cards which at this point don't have fanspeed control using the cvs version (so cards which don't use a ADT7473 sensor).

The cvs version can be obtained using:
cvs -d:pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock login (there is no password, just hit enter)
cvs -z3 -d:pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock co -P nvclock

Do you want them emailed somewhere? Unfortunately both of my 8800GT's utilize the ADT7473 sensor, but I'll post my debugs on them anyways.





For the Palit 8800GT

./nvclock -c 1 -i
-- General info --
Card: nVidia Geforce 8800GT
Architecture: G92 A2
PCI id: 0x611
GPU clock: 601.712 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1512.000 MHz
Stream units: 112 (1b)
ROP units: 16 (1b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR3
Clock: 899.996 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 58C
GPU temperature: 64C
Fanspeed: 1749 RPM
Fanspeed mode: manual
PWM duty cycle: 29.8%

-- VideoBios information --
Version: 62.92.12.00.05
Signon message: GeForce 8800 GT VGA BIOS
Performance level 0: gpu 600MHz/shader 1500MHz/memory 900MHz/1.05V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3

For the PNY 8800GT

./nvclock -c 2 -i
-- General info --
Card: nVidia Geforce 8800GT
Architecture: G92 A2
PCI id: 0x611
GPU clock: 601.712 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1512.000 MHz
Stream units: 112 (0b)
ROP units: 16 (1b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR3
Clock: 899.996 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 49C
GPU temperature: 58C
Fanspeed: 1007 RPM
Fanspeed mode: manual
PWM duty cycle: 29.8%

-- VideoBios information --
Version: 62.92.23.00.51
Signon message: PNY Verto GeForce 8800 GT PCI-Express
Performance level 0: gpu 600MHz/shader 1512MHz/memory 900MHz/0.00V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3




nvclock -c 1 -D
--- nVidia Geforce 8800GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 092880a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f007f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00001903
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001c02
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001900
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c0083828
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0d162f23
NV_PFB_TIMING1 (0x100224): 11010a0b
NV_PFB_TIMING2 (0x100228): 0208080c
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f428486
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000


nvclock -c 2 -D
--- nVidia Geforce 8800GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 092880a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f00fe
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00001903
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001c02
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001900
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c00837ce
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0b1c3228
NV_PFB_TIMING1 (0x100224): 0f010b0b
NV_PFB_TIMING2 (0x100228): 0109090d
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f42848a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[[Knuckles]]

Here are the cvs commands again, now without smileys :)

cvs -d :pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock login # (there is no password, just hit enter)
cvs -z3 -d :pserver:anonymous@nvclock.cvs.sourceforge.net:/cvsroot/nvclock co -P nvclock

nvclock cvs outputs for my 8600GT:

./nvclock -c 1 -i
Uknown Winbond vendor: 0
-- General info --
Card: nVidia Geforce 8600GT
Architecture: G84 A2
PCI id: 0x402
GPU clock: 540.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1188.000 MHz
Stream units: 32 (11b)
ROP units: 8 (11b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR2
Clock: 399.600 MHz

-- PCI-Express info --
Current Rate: 1X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 30C

-- VideoBios information --
Version: 60.84.61.00.00
Signon message: GeForce 8600 GT VGA BIOS
Performance level 0: gpu 540MHz/shader 1188MHz/memory 400MHz/0.00V/100%
VID mask: 3
Voltage level 0: 1.20V, VID: 0
Voltage level 1: 1.32V, VID: 1




./nvclock -D
Uknown Winbond vendor: 0
--- nVidia Geforce 8600GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 084200a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f3030003
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 040210de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8059e400
NV_400C (0x400c): 00002505
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00000000
NV_401C (0x401c): 00000000
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001602
NV_4028 (0x4028): a0090000
NV_402C (0x402c): 00001402
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00000000
NV_4044 (0x4044): 00000000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00000000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00000000
NV_E100 (0xe100): 00000b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000201
NV_E120 (0xe120): 00000167
NV_20008 (0x20008): c0081770
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01201000
NV_PFB_CFG0 (0x100204): 0055a020
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 00000101
NV_PFB_TIMING0 (0x100220): 06122a18
NV_PFB_TIMING1 (0x100224): 0c010a04
NV_PFB_TIMING2 (0x100228): 04040606
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 80408a8a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000


I'm beginning to hate this card. I guess it's the last time I go el-cheapo.
Feel free to PM me for more info or for testing patches.

[Jupiter]

nvclock cvs outputs for my 8800GTX OC2:

vger ~ # nvclock -c 1 -i
-- General info --
Card: nVidia Geforce 8800GTX
Architecture: NV50/G80 A2
PCI id: 0x191
GPU clock: 621.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1458.000 MHz
Stream units: 128 (11111111b)
ROP units: 24 (111111b)
-- Memory info --
Amount: 768 MB
Type: 384 bit DDR3
Clock: 999.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 42C
GPU temperature: 46C
Fanspeed: 2587 RPM
Fanspeed mode: auto
PWM duty cycle: 89.8%

-- VideoBios information --
Version: 60.80.0e.00.15
Signon message: GeForce 8800 GTX VGA BIOS
VID mask: 3
Voltage level 0: 1.10V, VID: 0
Voltage level 1: 1.20V, VID: 1
Voltage level 2: 1.30V, VID: 2

vger ~ # nvclock -D
--- nVidia Geforce 8800GTX GPU registers ---
NV_PMC_BOOT_0 (0x0): 450100a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041c69
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f33f00ff
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 019110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 3000c0b3
NV_4000 (0x4000): 80000000
NV_4004 (0x4004): 00002008
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00002504
NV_4010 (0x4010): 80016400
NV_4014 (0x4014): 00001603
NV_4018 (0x4018): 80016400
NV_401C (0x401c): 00001603
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001b02
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00001704
NV_4030 (0x4030): 00000000
NV_4034 (0x4034): 00000000
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00000000
NV_4044 (0x4044): 00000000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00000000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00000000
NV_E100 (0xe100): 00002998
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): 00000000
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 00001030
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 30000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0b1c3228
NV_PFB_TIMING1 (0x100224): 0e010a0c
NV_PFB_TIMING2 (0x100228): 000b090d
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8a48848a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[merlin-tc]

here we go


./nvclock -c 1 -i
-- General info --
Card: nvidia GeForce GTX 280
Architecture: GA0 A2
PCI id: 0x5e1
GPU clock: 601.712 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1296.000 MHz
Stream units: 128 (1b)
ROP units: 32 (1b)
-- Memory info --
Amount: 1024 MB
Type: 128 bit DDR3
Clock: 1107.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 34C
GPU temperature: 26C
Fanspeed: 82 RPM
Fanspeed mode: manual
PWM duty cycle: 40.0%

-- VideoBios information --
Version: 62.00.0e.00.01
Signon message: GT200 P651 SKU 0000 VGA BIOS
Performance level 0: gpu 300MHz/shader 600MHz/memory 100MHz/1.03V/100%
Performance level 1: gpu 400MHz/shader 800MHz/memory 300MHz/1.06V/100%
Performance level 2: gpu 602MHz/shader 1296MHz/memory 1107MHz/1.18V/100%
VID mask: 3
Voltage level 0: 1.03V, VID: 3
Voltage level 1: 1.06V, VID: 1
Voltage level 2: 1.12V, VID: 2
Voltage level 3: 1.18V, VID: 0




./nvclock -D
--- nvidia GeForce GTX 280 GPU registers ---
NV_PMC_BOOT_0 (0x0): 0a0080a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f7ff03ff
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 05e110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2200daa3
NV_4000 (0x4000): 80000000
NV_4004 (0x4004): 00002008
NV_4008 (0x4008): 10002200
NV_400C (0x400c): 00001602
NV_4010 (0x4010): 00001200
NV_4014 (0x4014): 00001c03
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00000000
NV_4024 (0x4024): 00000c01
NV_4028 (0x4028): 80090000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001604
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00010000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 0000e900
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000200
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c00800c0
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 00000800
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 40000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 0b010905
NV_PFB_TIMING2 (0x100228): 02010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8a40848a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000



PS: I think I can't be of much help when it's about fan speeds since no fan is connected anymore. I wonder how it gets 82RPM though :rolleyes:

[DuGi]

9600GSO fanless. nvclock displayed wrong GPU temp. it's 52C from nvidia-settings.

athlon% ./nvclock -i
-- General info --
Card: nVidia Geforce 9600GSO
Architecture: G92 A2
PCI id: 0x610
GPU clock: 249.748 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 621.000 MHz
Stream units: 96 (1b)
ROP units: 12 (0b)
-- Memory info --
Amount: 384 MB
Type: 128 bit DDR3
Clock: 499.500 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 27C

-- VideoBios information --
Version: 62.92.43.00.00
Signon message: GeForce 9600 GSO VGA BIOS
Performance level 0: gpu 550MHz/shader 1375MHz/memory 600MHz/0.00V/100%
Performance level 1: gpu 600MHz/shader 1500MHz/memory 800MHz/0.00V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3

athlon% ./nvclock -D
--- nVidia Geforce 9600GSO GPU registers ---
NV_PMC_BOOT_0 (0x0): 092800a2
NV_PBUS_DEBUG_0 (0x1080): 00002410
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30e003f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061010de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 9059e400
NV_400C (0x400c): 00002504
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80010000
NV_4024 (0x4024): 00001702
NV_4028 (0x4028): a0120000
NV_402C (0x402c): 00002504
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000105
NV_E120 (0xe120): 01000075
NV_20008 (0x20008): c008371f
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 18000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0d162f23
NV_PFB_TIMING1 (0x100224): 11010a0b
NV_PFB_TIMING2 (0x100228): 0208080c
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f428286
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[ccruiser]

Another one here willing to test:
Zotac GTX260²

Feel free to pm me if I can help

cu

ccruiser

[ccruiser]

Ok, got it working now, these are my outputs, hope it helps:

~/nvclock$ nvclock -c 1 -i
-- General info --
Card: nvidia GeForce GTX 260
Architecture: GA0 A2
PCI id: 0x5e2
GPU clock: 300.856 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1296.000 MHz
Stream units: 112 (1b)
ROP units: 28 (1b)
-- Memory info --
Amount: 896 MB
Type: 128 bit DDR3
Clock: 1188.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 37C
GPU temperature: 35C
Fanspeed: 694 RPM
Fanspeed mode: manual
PWM duty cycle: 40.0%

-- VideoBios information --
Version: 62.00.1a.00.0a
Signon message: GT200 P651 SKU 0009 VGA BIOS
Performance level 0: gpu 300MHz/shader 600MHz/memory 100MHz/1.11V/100%
Performance level 1: gpu 400MHz/shader 800MHz/memory 300MHz/1.12V/100%
Performance level 2: gpu 576MHz/shader 1242MHz/memory 999MHz/1.12V/100%
VID mask: 3
Voltage level 0: 1.06V, VID: 3
Voltage level 1: 1.11V, VID: 2
Voltage level 2: 1.12V, VID: 1
Voltage level 3: 1.15V, VID: 0

nvclock -D
--- nvidia GeForce GTX 260 GPU registers ---
NV_PMC_BOOT_0 (0x0): 0a0100a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f77f037f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 05e210de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2200daa3
NV_4000 (0x4000): 80000000
NV_4004 (0x4004): 00002008
NV_4008 (0x4008): 10002200
NV_400C (0x400c): 00001602
NV_4010 (0x4010): 00001200
NV_4014 (0x4014): 00001c03
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00000000
NV_4024 (0x4024): 00000c01
NV_4028 (0x4028): 80090000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001604
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00010000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 0000e900
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000200
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c00800c0
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 00000800
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 38000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 0b010905
NV_PFB_TIMING2 (0x100228): 02010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8a4088aa
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[via4e]

8800gt (gigabyte gv-nx88t512hp) OC
results more later

[via4e]

nvclock -i
-- General info --
Card: nVidia Geforce 8800GT
Architecture: G92 A2
PCI id: 0x611
GPU clock: 449.996 MHz
Bustype: PCI-Express
-- Shader info --
Clock: 1188.000 MHz
Stream units: 112 (1b)
ROP units: 16 (1b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR3
Clock: 702.000 MHz
-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X
-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 37C
GPU temperature: 42C
Fanspeed: 82 RPM
Fanspeed mode: manual
PWM duty cycle: 29.8%
-- VideoBios information --
Version: 62.92.16.00.04
Signon message: GV-NX88T512HP F20
Performance level 0: gpu 450MHz/shader 1200MHz/memory 700MHz/0.00V/100%
Performance level 1: gpu 700MHz/shader 1715MHz/memory 920MHz/0.00V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3

[via4e]

nvclock -D
--- nVidia Geforce 8800GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 092880a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f007f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dfb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 9018e400
NV_400C (0x400c): 00001a04
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001602
NV_4028 (0x4028): a0090000
NV_402C (0x402c): 00001903
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001900
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c00836ca
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0c1e362c
NV_PFB_TIMING1 (0x100224): 0f010b0c
NV_PFB_TIMING2 (0x100228): 010a0a0e
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f42848a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[zzzz]

-- General info --
Card: nVidia Geforce 8600GT
Architecture: G84 A2
PCI id: 0x402
GPU clock: 553.500 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1188.000 MHz
Stream units: 32 (11b)
ROP units: 8 (11b)
-- Memory info --
Amount: 256 MB
Type: 128 bit DDR3
Clock: 702.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 46C

-- VideoBios information --
Version: 60.84.35.00.1a
Signon message: nVIDIA Geforce 8600 GT VGA BIOS
Performance level 0: gpu 548MHz/shader 1188MHz/memory 700MHz/0.00V/100%
VID mask: 3
Voltage level 0: 1.20V, VID: 1
Voltage level 1: 1.32V, VID: 3

--- nVidia Geforce 8600GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 084200a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f3030003
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 040210de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e001bb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 80006400
NV_400C (0x400c): 00000d02
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00000000
NV_401C (0x401c): 00000000
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001602
NV_4028 (0x4028): a0090000
NV_402C (0x402c): 00002904
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00000000
NV_4044 (0x4044): 00000000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00000000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00000000
NV_E100 (0xe100): 00000b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000088
NV_E120 (0xe120): 00000028
NV_20008 (0x20008): c00818de
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 10000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 10264438
NV_PFB_TIMING1 (0x100224): 12010c0b
NV_PFB_TIMING2 (0x100228): 02100d12
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 80408886
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[ce007]

OK, 8500GT 512M here

nvclock -l 1 -i
Available OpenGL options:
fsaa aniso quality vsync flipping texsharpen texclamping linegamma
Display options for crt-1:
vibrance
-- General info --
Card: nVidia Geforce 8500GT
Architecture: G86 A2
PCI id: 0x421
GPU clock: 459.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1836.000 MHz
Stream units: 16 (1b)
ROP units: 8 (1b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR2
Clock: 351.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 37C

-- VideoBios information --
Version: 60.86.65.00.00
Signon message: GeForce 8500 GT VGA BIOS
Performance level 0: gpu 459MHz/shader 918MHz/memory 350MHz/0.00V/100%
VID mask: 3
Voltage level 0: 1.20V, VID: 0
Voltage level 1: 1.32V, VID: 1



Registers:

--- nVidia Geforce 8500GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 086100a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f3030001
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 042110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dfa3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8059e400
NV_400C (0x400c): 00000d02
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00000000
NV_401C (0x401c): 00000000
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00002202
NV_4028 (0x4028): a0090000
NV_402C (0x402c): 00001102
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00000000
NV_4044 (0x4044): 00000000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00000000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00000000
NV_E100 (0xe100): 00000900
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c00817fe
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01201000
NV_PFB_CFG0 (0x100204): 0055a020
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 00000101
NV_PFB_TIMING0 (0x100220): 06121e18
NV_PFB_TIMING1 (0x100224): 0c010904
NV_PFB_TIMING2 (0x100228): 04030606
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8040869e
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000



Hmm... GPU temperature seems wrong
as nvidia-settings shows 50 C
Later I'll post results for Gigabyte 8600 GTS

[Thunderbird]

I have added some fixes and improvements to cvs like e.g. better memory bus width reporting and highly experiment fanspeed code for 8600gt/9600gt/9600gso boards. This fanspeed code needs to be tested as I don't know if it works already.

[Erik_]

Quadro FX3700m 1024MB (upto 550MHz/799MHz) in a Sager 9262 laptop.
And very much willing to help out.

[unix_epoch]

Note: the fanspeed mode was originally manual, but after changing it a few times, it is now auto.

Also, the GPU temperature is incorrect. nvclock shows 56 GPU/50 board while nvidia-settings shows 63 GPU/50 board. It appears that this board is indeed using the ADT7473. If desired I can force the GPU to various temperatures and report the difference.


$ nvclock -c 1 -i
-- General info --
Card: nVidia Geforce 8800GT
Architecture: G92 A2
PCI id: 0x611
GPU clock: 648.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1620.000 MHz
Stream units: 112 (1b)
ROP units: 16 (1b)
-- Memory info --
Amount: 512 MB
Type: 128 bit DDR3
Clock: 950.400 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 46C
GPU temperature: 50C
Fanspeed: 725 RPM
Fanspeed mode: auto
PWM duty cycle: 29.8%

-- VideoBios information --
Version: 62.92.24.00.02
Signon message: GeForce 8800 GT VGA BIOS
Performance level 0: gpu 650MHz/shader 1620MHz/memory 950MHz/0.00V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3


$ nvclock -D
--- nVidia Geforce 8800GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 092880a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f007f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061110de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00002c05
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001e02
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00001203
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001900
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c0083779
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0b1b2f25
NV_PFB_TIMING1 (0x100224): 11011612
NV_PFB_TIMING2 (0x100228): 0209090d
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f42848e
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[Thunderbird]

It indeed appears that for various users the temperature of the ADT7473 differs between nvclock and nvidia-settings. Most of the time it is a difference of about 7C. If some people could report what differences they are seeing in various situations (e.g. use glxgears to heat up the card). Also mention which gpu you are using and what pci id (nvclock shows the pci id using -i).

[ccruiser]

These are my temp differences idle:

nvidia-settings: core:40C ambient:34C

nvclock: Sensor: Analog Devices ADT7473
Board temperature: 34C
GPU temperature: 32C
Fanspeed: 694 RPM
Fanspeed mode: manual
PWM duty cycle: 40.0%

-- General info --
Card: nvidia GeForce GTX 260
Architecture: GA0 A2
PCI id: 0x5e2
GPU clock: 300.856 MHz
Bustype: PCI-Express

[Kano]

nvidia-settings -q GPUCoreTemp -q GPUAmbientTemp|grep Attr

is the smart way to check temp with nvidia settings. Core is here also +8C more with nvidia-settings (8800 GTS 512) or +7C (6800 GS).

[ccruiser]

ok, so now the "smart" way ;) after 10 mins of glxgears:

nvsettings:

Attribute 'GPUCoreTemp' (quad64er:0.0): 53.
Attribute 'GPUAmbientTemp' (quad64er:0.0): 47.

nvclock:

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 48C
GPU temperature: 48C
Fanspeed: 701 RPM
Fanspeed mode: manual
PWM duty cycle: 40.0%

-- General info --
Card: nvidia GeForce GTX 260
Architecture: GA0 A2
PCI id: 0x5e2
GPU clock: 576.000 MHz
Bustype: PCI-Express

[Thunderbird]

I have added some more debug code for temperature sensors. Using the latest cvs version 'nvclock -d -T' shows both the lowlevel stuff nvclock sees and the stuff reported by NV-CONTROL (nvidia-settings uses this). I would like a couple of test runs on different cards with different temperatures as I want to find the correct offsets needed for each gpu model. (the pci id and gpu type is needed as well)

[ccruiser]

ok, I installed the latest cvs version, these are the outputs:

idle

nvclock -d -T
Probing I2C busses
bus: 2 device: ae
bus: 2 device: ac
bus: 2 device: aa
bus: 2 device: a8
bus: 2 device: a6
bus: 2 device: a4
bus: 2 device: a2
bus: 2 device: a0
bus: 2 device: 6e
bus: 3 device: e0
bus: 3 device: 5c
m1=2 m2=1 n1=22 n2=1 p=0
m1=7 m2=1 n1=39 n2=1 p=1
nvidia GeForce GTX 260
=> GPU temperature: 35C
=> Board temperature: 37C

nvclock -c 1 -i
-- General info --
Card: nvidia GeForce GTX 260
Architecture: GT200 A2
PCI id: 0x5e2
GPU clock: 300.856 MHz
Bustype: PCI-Express

[ccruiser]

after 5 mins of glxgears

nvclock -d -T
Probing I2C busses
bus: 2 device: ae
bus: 2 device: ac
bus: 2 device: aa
bus: 2 device: a8
bus: 2 device: a6
bus: 2 device: a4
bus: 2 device: a2
bus: 2 device: a0
bus: 2 device: 6e
bus: 3 device: e0
bus: 3 device: 5c
m1=2 m2=1 n1=22 n2=1 p=0
m1=7 m2=1 n1=39 n2=1 p=1
nvidia GeForce GTX 260
=> GPU temperature: 44C
=> Board temperature: 43C

nvidia-settings

Attribute 'GPUCoreTemp' (quad64er:0.0): 48.
Attribute 'GPUAmbientTemp' (quad64er:0.0): 42

[Thunderbird]

Hmm, something doesn't seem to work in my nv-control debug code. I fixed it in cvs.

[ccruiser]

ok, so this is the output of the new cvs:

nvclock -d -T
Probing I2C busses
bus: 2 device: ae
bus: 2 device: ac
bus: 2 device: aa
bus: 2 device: a8
bus: 2 device: a6
bus: 2 device: a4
bus: 2 device: a2
bus: 2 device: a0
bus: 2 device: 6e
bus: 3 device: e0
bus: 3 device: 5c
m1=2 m2=1 n1=22 n2=1 p=0
m1=7 m2=1 n1=39 n2=1 p=1
nvidia GeForce GTX 260
=> GPU temperature: 33C
=> Board temperature: 34C
=> GPU temperature according to NV-CONTROL: 41
=> Board temperature according to NV-CONTROL: 996609760

[Thunderbird]

I fixed the board temperature but that one should be the same between nvclock and nvidia-settings.

[DuGi]

nvclock display wrong temperature on 9600GSO.

nvclock -T -d
Probing I2C busses
bus: 0 device: a0
bus: 0 device: 6e
m1=4 m2=1 n1=37 n2=1 p=1
m1=4 m2=1 n1=37 n2=1 p=2
nVidia Geforce 9600GSO
NV_20008 (0x20008): c0083724
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 27C
=> GPU temperature according to NV-CONTROL: 52
=> Board temperature according to NV-CONTROL: 52


nvidia-settings -q GPUCoreTemp -q GPUAmbientTemp|grep Attr
Attribute 'GPUCoreTemp' (athlon:0.0): 52.

[Thunderbird]

It has been fixed in cvs.

[DuGi]

hmm... it's nvclock output from latest cvs compiled few minutes before i wrote post above.

[Jupiter]

Just updated from cvs. It appears i have 50c in nvidia-settings
and GPU=45c board_temp=40c in nvclock. Also i am forcing 90%
fan speed but it says here it is set to 'auto'. Fan speed is
correct though.
vger ~ # nvclock -i
-- General info --
Card: nVidia Geforce 8800GTX
Architecture: NV50/G80 A2
PCI id: 0x191
GPU clock: 621.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1458.000 MHz
Stream units: 128 (11111111b)
ROP units: 24 (111111b)
-- Memory info --
Amount: 768 MB
Type: 384 bit DDR3
Clock: 999.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 40C
GPU temperature: 45C
Fanspeed: 2580 RPM
Fanspeed mode: auto
PWM duty cycle: 89.8%

-- VideoBios information --
Version: 60.80.0e.00.15
Signon message: GeForce 8800 GTX VGA BIOS
VID mask: 3
Voltage level 0: 1.10V, VID: 0
Voltage level 1: 1.20V, VID: 1
Voltage level 2: 1.30V, VID: 2

[Thunderbird]

I have added a bunch of fixes and temperature reporting of LM99/ADT7473/MAX6659 sensors used on geforce6/7/8 boards should be correct now.

[deanjo]

I have added a bunch of fixes and temperature reporting of LM99/ADT7473/MAX6659 sensors used on geforce6/7/8 boards should be correct now.

They match up here now.

[Thunderbird]

The number of stream and rop units wasn't correct on most geforce8/9/gtx cards. I have fixed that in cvs and hopefully it is correct for everyone now.

[unix_epoch]

GPU: 8800GT (G92 A2)
PCI ID: 0x611

On my card nvclock and nvidia-settings are now much closer, but there is still an occasional difference of 1C, which may be considered acceptable. Also, on a few runs of nvclock -T, the output was completely weird:


user@host:~/src/nvclock/nvclock/src$ ./nvclock -T
nVidia Geforce 8800GT
=> GPU temperature: 68C
=> Board temperature: 54C
user@host:~/src/nvclock/nvclock/src$ ./nvclock -T
nVidia Geforce 8800GT
=> GPU temperature: 37C


I just got a 9500GT for another PC. If I notice anything odd with that I'll report it. Thanks for the good work on nvclock so far.

[Thunderbird]

It is likely a rounding difference. The sensor outputs in more than 8 bits and right now I'm showing just the part in front of the dot/comma. I could also show the extra fraction but it isn't that important, you could say it is noise.

[ZyanKLee]

idle:
./nvclock -d -T
Probing I2C busses
bus: 0 device: fc
bus: 0 device: ae
bus: 0 device: ac
bus: 0 device: aa
bus: 0 device: a8
bus: 0 device: a6
bus: 0 device: a4
bus: 0 device: a2
bus: 0 device: a0
bus: 0 device: 74
bus: 0 device: 6e
bus: 3 device: a0
bus: 3 device: 6e
m1=5 m2=1 n1=37 n2=1 p=1
m1=3 m2=1 n1=32 n2=1 p=1
nVidia Geforce 8600GT
NV_20008 (0x20008): c0081860
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 41C
=> GPU temperature according to NV-CONTROL: 54


with glxgears:
./nvclock -d -T
Probing I2C busses
bus: 0 device: fc
bus: 0 device: ae
bus: 0 device: ac
bus: 0 device: aa
bus: 0 device: a8
bus: 0 device: a6
bus: 0 device: a4
bus: 0 device: a2
bus: 0 device: a0
bus: 0 device: 74
bus: 0 device: 6e
bus: 3 device: a0
bus: 3 device: 6e
m1=5 m2=1 n1=37 n2=1 p=1
m1=3 m2=1 n1=32 n2=1 p=1
nVidia Geforce 8600GT
NV_20008 (0x20008): c00818c0
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 45C
=> GPU temperature according to NV-CONTROL: 57

running multiple glxgears:
./nvclock -d -T
Probing I2C busses
bus: 0 device: fc
bus: 0 device: ae
bus: 0 device: ac
bus: 0 device: aa
bus: 0 device: a8
bus: 0 device: a6
bus: 0 device: a4
bus: 0 device: a2
bus: 0 device: a0
bus: 0 device: 74
bus: 0 device: 6e
bus: 3 device: a0
bus: 3 device: 6e
m1=5 m2=1 n1=37 n2=1 p=1
m1=3 m2=1 n1=32 n2=1 p=1
nVidia Geforce 8600GT
NV_20008 (0x20008): c0081902
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 48C
=> GPU temperature according to NV-CONTROL: 60

btw: this card has no fan - but I can change fanspeed :-D

[a7v-user]

NVIDIA Driver Version: 177.80
./nvclock -i :
-- General info --
Card: nVidia Geforce 9800GT
Architecture: G92 A2
PCI id: 0x614
GPU clock: 601.712 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1512.000 MHz
Stream units: 112 (01111111b)
ROP units: 16 (1111b)
-- Memory info --
Amount: 512 MB
Type: 256 bit DDR3
Clock: 499.500 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 22C
Fanspeed: 65.0%

-- VideoBios information --
Version: 62.92.52.00.00
Signon message: GeForce 9800 GT VGA BIOS
Performance level 0: gpu 600MHz/shader 1500MHz/memory 500MHz/0.00V/100%
Performance level 1: gpu 600MHz/shader 1500MHz/memory 900MHz/0.00V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3
./nvclock -d -T
Probing I2C busses
bus: 0 device: a0
bus: 0 device: 6e
m1=4 m2=1 n1=37 n2=1 p=1
m1=7 m2=1 n1=39 n2=1 p=0
nVidia Geforce 9800GT
NV_20008 (0x20008): c0083675
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 20C
=> GPU temperature according to NV-CONTROL: 43

After 10 mins glxgears:

Probing I2C busses
bus: 0 device: a0
bus: 0 device: 6e
m1=4 m2=1 n1=37 n2=1 p=1
m1=7 m2=1 n1=39 n2=1 p=0
nVidia Geforce 9800GT
NV_20008 (0x20008): c00836fa
slope=0.043000, offset=-227.000000, correction=0
=> GPU temperature: 25C
=> GPU temperature according to NV-CONTROL: 50

[Thunderbird]

The correction values which I use right now for the internal sensor aren't correct on geforce8/9 cards. These values come from the bios but I might not using them correctly or don't have all values.

In short nvclock reads a 'raw' temperature and then has to convert it into the real temperature using something like: temperature = raw_temperate * slope + offset + correction. It would be interesting to know what rivatuner shows for some cards. In its diagnostics report it shows the values it uses.

[KeithB]

Slightly behind the curve, but I'm currently arguing with a 9800M GTS that nvclock can probably help me with so count that in. Main thing for me is smartdimmer control if it's still an option with these cards.

Let me know what you need.

[Thunderbird]

Latest cvs should improve temperature readings on a bunch of cards which use an internal sensor. All should work well now except for G80/G92.

For smartdimmer show me the output of nvclock -D on latest cvs.

[KeithB]

Latest cvs should improve temperature readings on a bunch of cards which use an internal sensor. All should work well now except for G80/G92.

For smartdimmer show me the output of nvclock -D on latest cvs.

-D output (had to use -f too) from a 2 hour old CVS build below. For reference (if it matters), the Nvidia drivers are 180.11.

keith@X70MV:~/temp$ cat nv9800mgts
--- Unknown Nvidia card GPU registers ---
NV_PMC_BOOT_0 (0x0): 094400a1
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f000f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 062810de
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dea3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 10182200
NV_400C (0x400c): 00002707
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00010000
NV_4024 (0x4024): 00000c01
NV_4028 (0x4028): 80120000
NV_402C (0x402c): 00001b04
NV_4030 (0x4030): 20120000
NV_4034 (0x4034): 00001604
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 001c1b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00004001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c0083669
NV_20400 (0x20400): 00000025
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000400
NV_PFB_CFG0 (0x100200): 01000800
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 0b010905
NV_PFB_TIMING2 (0x100228): 02010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8f40e00e
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000
keith@X70MV:~/temp$

[Thunderbird]

Please retry using the latest cvs. It unlocks this feature (although I can't say if really all those laptops have it) on laptops from HP, Sony, Samsung and Zepto. Also show an updated nvclock -D output if nvclock says your laptop isn't supported. Note smartdimmer might have no effect on your laptop.

[KeithB]

Please retry using the latest cvs. It unlocks this feature (although I can't say if really all those laptops have it) on laptops from HP, Sony, Samsung and Zepto. Also show an updated nvclock -D output if nvclock says your laptop isn't supported. Note smartdimmer might have no effect on your laptop.

How latest is latest? The build that generated that output was pulled from the CVS server about 2 hours ago. The PCI ID is:
keith@X70MV:~$ lspci -vv | grep -i nvi
01:00.0 VGA compatible controller: nVidia Corporation Device 0628 (rev a1)
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia


The laptop itself is made by a UK company called Novatech - it's the X70 based on a standard Clevo chassis.

[Thunderbird]

AT this point the changes have been made 76 minutes ago and I added some other fix as my detection was broken about 16 minutes ago ;)

[KeithB]

Now that's just showing off :)

I need to hit the sack now otherwise I'll not get into work in time tomorrow - will post the post-rebuild results as soon as i can tomorrow though.

Edit:Nevermind - I did the rebuild now - although the output difference was minimal. Command output for a -D, -i, -f -i and -f -D included below.
keith@X70MV:~/temp$ /usr/local/bin/nvclock -D
It seems your card isn't officialy supported in NVClock yet.
The reason can be that your card is too new.
If you want to try it anyhow [DANGEROUS], use the option -f to force the setting(s).
NVClock will then assume your card is a 'normal', it might be dangerous on other cards.
Also please email the author the pci_id of the card for further investigation.
[Get that value using the -i option].

keith@X70MV:~/temp$ /usr/local/bin/nvclock -i
It seems your card isn't officialy supported in NVClock yet.
The reason can be that your card is too new.
If you want to try it anyhow [DANGEROUS], use the option -f to force the setting(s).
NVClock will then assume your card is a 'normal', it might be dangerous on other cards.
Also please email the author the pci_id of the card for further investigation.
[Get that value using the -i option].

keith@X70MV:~/temp$ /usr/local/bin/nvclock -i -f
-- General info --
Card: Unknown Nvidia card
Architecture: G94 A1
PCI id: 0x628
GPU clock: 182.248 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 648.000 MHz
Stream units: 64 (1111b)
ROP units: 16 (1111b)
-- Memory info --
Amount: 512 MB
Type: 256 bit DDR3
Clock: 601.712 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: 37C
Fanspeed: 100.0%

-- VideoBios information --
Version: 62.94.2e.00.00
Signon message: G94 P610 NB9E-GT VGA BIOS
Performance level 0: gpu 275MHz/shader 550MHz/memory 300MHz/0.90V/100%
Performance level 1: gpu 400MHz/shader 800MHz/memory 300MHz/0.90V/100%
Performance level 2: gpu 600MHz/shader 1500MHz/memory 799MHz/1.11V/100%
VID mask: 7
Voltage level 0: 0.90V, VID: 3
Voltage level 1: 1.11V, VID: 7

keith@X70MV:~/temp$ /usr/local/bin/nvclock -f -D
--- Unknown Nvidia card GPU registers ---
NV_PMC_BOOT_0 (0x0): 094400a1
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f000f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 062810de
NV_PBUS_PCI_0 (0x182c): 08601558
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dea3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 10182200
NV_400C (0x400c): 00002707
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00010000
NV_4024 (0x4024): 00000c01
NV_4028 (0x4028): 80120000
NV_402C (0x402c): 00001b04
NV_4030 (0x4030): 20120000
NV_4034 (0x4034): 00001604
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 001c1b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00004001
NV_E120 (0xe120): 00000000
NV_20008 (0x20008): c0083662
NV_20400 (0x20400): 00000025
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000400
NV_PFB_CFG0 (0x100200): 01000800
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 0b010905
NV_PFB_TIMING2 (0x100228): 02010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8f40e00e
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000
keith@X70MV:~/temp$

[Thunderbird]

The easiest way to test if smartdimmer works for you is to edit src/backend/nvreg.h. For instance edit 'PCI_VENDOR_ID_ZEPTO'. Change its value from 0x1a46 to 0x1558. Then recompile nvclock and then try.

[KeithB]

That tweak to the source results in complaints about it only supporting the 8x00 or less series.

Error!
Smartdimmer is only supported on certain (HP/Samsung/Sony/Zepto) laptops using a Geforce 6200/7x00Go/8x00Go. If you want support on your laptop contact the author.


I'll do a bit more digging around and see what I can find that might help.

[Thunderbird]

Then the real hack. Open src/backend/nv50.c. Somewhere you'll see:

if((nv_card->gpu == MOBILE) &&
((nv_card->subvendor_id == PCI_VENDOR_ID_HP) ||
(nv_card->subvendor_id == PCI_VENDOR_ID_SANYO) ||
(nv_card->subvendor_id == PCI_VENDOR_ID_SONY) ||
(nv_card->subvendor_id == PCI_VENDOR_ID_ZEPTO)))
{

Change it to:
if(nv_card->gpu == MOBILE)
{

[KeithB]

Same result there - leave it with me for now in case I'm doing something stupid. I can see the code reference for the G94 chipset that the 9800M is based on so it should (in theory!) recognise it.

Edit: Now I can make some sense of the registers, it seems it may not be the smartdimmer stuff - the register that affects is already set to 100% :(.

[Thunderbird]

Right now the code asusmes 0x400 is the maximum value which not be correct and laptop specific. Try to set smartdimmer to a lower version just to see if it has any effect on your laptop.

[Thunderbird]

Fanspeed adjustment should now work on geforce 8600/9600 and perhaps some other cards using the cvs version. Support for 8800/9800 cards will follow quickly if I know for sure that the current code works. I need heavy testing of it. Myself I only have a fanless 8600gt.

[[Knuckles]]

Fanspeed adjustment working on my 8600GT :)


$ src/nvclock -f -F +10
Uknown Winbond vendor: 0
Current fanspeed: 30.0%
Changing fanspeed from 30.0% to 40.0%
New fanspeed: 41.1%

[unix_epoch]

Fan speed still works on my 8800GT, with the ADT7473 temperature sensor (it worked in the version from Ubuntu 8.10 already). I still need to test my 9500GT with the CVS version (the Ubuntu version wouldn't work at all). One note: it seems that the new fan speed is read too soon after setting it, as nearly always it shows the old speed as the new speed:


$ nvclock -f -F 60
Current fanspeed: 837 RPM
PWM duty cycle: 34.9%
Changing duty cycle from 34.9 to 60.0
Fanspeed: 837 RPM
New PWM duty cycle: 34.9

[deanjo]

nvclock Debug info for a 780a/8200


./nvclock -D -f
--- Unknown Nvidia card GPU registers ---
NV_PMC_BOOT_0 (0x0): 0aa600a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00241749
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f1010001
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 00000000
NV_PFB_CFG0 (0x100200): 00000000
NV_PFB_CFG0 (0x100204): 00000000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 00000000
NV_PFB_TIMING0 (0x100220): 00000000
NV_PFB_TIMING1 (0x100224): 00000000
NV_PFB_TIMING2 (0x100228): 00000000
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 80c070c0
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[koschi]

My Gainward 9800GT shows -389°C GPU temperature with latest nvclock from CVS :eek:

./nvclock -d -T
Probing I2C busses
m1=4 m2=1 n1=37 n2=1 p=1
m1=7 m2=1 n1=39 n2=1 p=0
nVidia Geforce 9800GT
NV_20008 (0x20008): c00836ae
divider=18.700001, offset=-13096.299805
=> GPU temperature: -389C

pci ID is 0x614
nvidia settings report 45°C for the GPU

Controlling of fanspeed I couldn't test because there is none attached...

[Thunderbird]

My Gainward 9800GT shows -389°C GPU temperature with latest nvclock from CVS :eek:

./nvclock -d -T
Probing I2C busses
m1=4 m2=1 n1=37 n2=1 p=1
m1=7 m2=1 n1=39 n2=1 p=0
nVidia Geforce 9800GT
NV_20008 (0x20008): c00836ae
divider=18.700001, offset=-13096.299805
=> GPU temperature: -389C

pci ID is 0x614
nvidia settings report 45°C for the GPU

Controlling of fanspeed I couldn't test because there is none attached...

Could you add the output of nvlcock -D?

[koschi]

:) nvclock -D

--- nVidia Geforce 9800GT GPU registers ---
NV_PMC_BOOT_0 (0x0): 092a00a2
NV_PBUS_DEBUG_0 (0x1080): 00002410
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f007f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061410de
NV_PBUS_PCI_0 (0x182c): 040110b0
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00001903
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001c02
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001910
NV_E114 (0xe114): 0000a2c3
NV_E118 (0xe118): 00005984
NV_E11C (0xe11c): 0000103b
NV_E120 (0xe120): 000005ae
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c008369d
NV_20400 (0x20400): 0000002d
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0d152e21
NV_PFB_TIMING1 (0x100224): 12010b0c
NV_PFB_TIMING2 (0x100228): 0207070a
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f429286
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[Thunderbird]

On most G92 cards temperature reading is broken but on yours it appears that the register works correctly (NV_20400 contains the right temperature). I will look at this when I have some more test data and won't be able to fix it in beta4 yet.

[koschi]

On most G92 cards temperature reading is broken but on yours it appears that the register works correctly (NV_20400 contains the right temperature). I will look at this when I have some more test data and won't be able to fix it in beta4 yet.

No need to hurry ;-) For the time being I use an older version of nvclock and add 23°C to the value it gives, to have the real temperature.

Thanks for bringing back some live to nvclock ;)

[DuGi]

some data from beta4:

nvclock -d -T
Probing I2C busses
bus: 0 device: a0
bus: 0 device: 6e
m1=7 m2=1 n1=39 n2=1 p=0
m1=7 m2=1 n1=36 n2=1 p=0
nVidia Geforce 9600GSO
NV_20008 (0x20008): c00836e4
divider=18.700001, offset=-13096.299805
=> GPU temperature: -386C
=> GPU temperature according to NV-CONTROL: 49
nvclock -D
--- nVidia Geforce 9600GSO GPU registers ---
NV_PMC_BOOT_0 (0x0): 092800a2
NV_PBUS_DEBUG_0 (0x1080): 00002410
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30e003f
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061010de
NV_PBUS_PCI_0 (0x182c): 00000000
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 9059e400
NV_400C (0x400c): 00002504
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80010000
NV_4024 (0x4024): 00001702
NV_4028 (0x4028): a0120000
NV_402C (0x402c): 00002504
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00001b00
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000105
NV_E120 (0xe120): 01000075
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c00836e1
NV_20400 (0x20400): 00000031
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 18000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0d162f23
NV_PFB_TIMING1 (0x100224): 11010a0b
NV_PFB_TIMING2 (0x100228): 0208080c
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f428286
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[dvohwinkel]

Hi I have Fedora 10 x86-64 on a Intel E8500 with a XFX Nvidia 260/216 . I compiled nvclock from cvs today.. here is my debug info. Keep up the great work!!

NVClock v0.8 (Beta4)

[dave@ion src]$ ./nvclock -d -T
Probing I2C busses
bus: 1 device: a0
bus: 1 device: 74
bus: 1 device: 6e
bus: 3 device: e0
bus: 3 device: 5c
m1=3 m2=1 n1=32 n2=1 p=0
m1=6 m2=1 n1=37 n2=1 p=0
nvidia GeForce GTX 260
=> GPU temperature: 51C
=> Board temperature: 42C
=> GPU temperature according to NV-CONTROL: 51
=> Board temperature according to NV-CONTROL: 42


[dave@ion src]$ ./nvclock -i
-- General info --
Card: nvidia GeForce GTX 260
Architecture: GT200 A2
PCI id: 0x5e2
GPU clock: 666.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1404.000 MHz
Stream units: 216 (11111110b)
ROP units: 28 (01111111b)
-- Memory info --
Amount: 896 MB
Type: 448 bit DDR3
Clock: 1152.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 42C
GPU temperature: 50C
Fanspeed: 338 RPM
Fanspeed mode: auto
PWM duty cycle: 40.0%

-- VideoBios information --
Version: 62.00.1a.00.93
Signon message: GT200 P651 SKU 0004 VGA BIOS
Performance level 0: gpu 300MHz/shader 600MHz/memory 100MHz/1.11V/100%
Performance level 1: gpu 400MHz/shader 800MHz/memory 300MHz/1.12V/100%
Performance level 2: gpu 666MHz/shader 1404MHz/memory 1150MHz/1.12V/100%
VID mask: 3
Voltage level 0: 1.06V, VID: 3
Voltage level 1: 1.11V, VID: 2
Voltage level 2: 1.12V, VID: 1
Voltage level 3: 1.15V, VID: 0


[dave@ion src]$ ./nvclock -D
--- nvidia GeForce GTX 260 GPU registers ---
NV_PMC_BOOT_0 (0x0): 0a0100a2
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f77f03fe
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 05e210de
NV_PBUS_PCI_0 (0x182c): 23911682
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2200dbb3
NV_4000 (0x4000): 80000000
NV_4004 (0x4004): 00002008
NV_4008 (0x4008): 80006400
NV_400C (0x400c): 00002003
NV_4010 (0x4010): 00001200
NV_4014 (0x4014): 00001c03
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00001a02
NV_4028 (0x4028): 80000000
NV_402C (0x402c): 00002506
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00010000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 0000e900
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000200
NV_E120 (0xe120): 00000000
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c00800c0
NV_20400 (0x20400): 00000000
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 00001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 38000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0c1c3227
NV_PFB_TIMING1 (0x100224): 10010b0b
NV_PFB_TIMING2 (0x100228): 0209090e
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 884088aa
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[MindFlayer]

From latest cvs using Asus EN9800GTX+ (G92)

./nvclock -d -T
Unhandled init script entry with id '�' at da9a
Unhandled init script entry with id '�' at dabd
Unhandled init script entry with id '�' at dae0
Unhandled init script entry with id '�' at db03
Probing I2C busses
bus: 0 device: a0
bus: 0 device: 74
bus: 0 device: 6e
bus: 1 device: ae
bus: 1 device: ac
bus: 1 device: aa
bus: 1 device: a8
bus: 1 device: a6
bus: 1 device: a4
bus: 1 device: a2
bus: 1 device: a0
m1=5 m2=1 n1=51 n2=1 p=0
m1=6 m2=1 n1=41 n2=1 p=0
nVidia Geforce 9800GTX
NV_20008 (0x20008): c00836f0
divider=18.700001, offset=-13096.299805
=> GPU temperature: -386C
=> GPU temperature according to NV-CONTROL: 49

./nvclock -i
Unhandled init script entry with id '�' at da9a
Unhandled init script entry with id '�' at dabd
Unhandled init script entry with id '�' at dae0
Unhandled init script entry with id '�' at db03
-- General info --
Card: nVidia Geforce 9800GTX
Architecture: G92 A2
PCI id: 0x612
GPU clock: 738.000 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1836.000 MHz
Stream units: 128 (11111111b)
ROP units: 16 (1111b)
-- Memory info --
Amount: 512 MB
Type: 256 bit DDR3
Clock: 1101.600 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: -386C

-- VideoBios information --
Version: 62.92.5d.00.01
Signon message: EN9800GTX+ DK VBIOS Ver 62.92.5D.00.AS11
Performance level 0: gpu 740MHz/shader 1836MHz/memory 1100MHz/1.30V/100%
VID mask: 3
Voltage level 0: 1.00V, VID: 0
Voltage level 1: 1.10V, VID: 1
Voltage level 2: 1.20V, VID: 2
Voltage level 3: 1.30V, VID: 3

./nvclock -D
Unhandled init script entry with id '�' at da9a
Unhandled init script entry with id '�' at dabd
Unhandled init script entry with id '�' at dae0
Unhandled init script entry with id '�' at db03
--- nVidia Geforce 9800GTX GPU registers ---
NV_PMC_BOOT_0 (0x0): 092900a2
NV_PBUS_DEBUG_0 (0x1080): 00002410
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f00ff
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061210de
NV_PBUS_PCI_0 (0x182c): 82a61043
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dbb3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 8018e400
NV_400C (0x400c): 00003305
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 80000000
NV_4024 (0x4024): 00002202
NV_4028 (0x4028): a0000000
NV_402C (0x402c): 00002906
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00005910
NV_E114 (0xe114): 00001047
NV_E118 (0xe118): 000005b2
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c00836f7
NV_20400 (0x20400): 00000032
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001000
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 0d1c3227
NV_PFB_TIMING1 (0x100224): 10010b0b
NV_PFB_TIMING2 (0x100228): 0209090e
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f42888a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

[ironman]

HP elitebook 8530w with Quadro FX770m here if needed

[ironman]

NVIDIA_G96.DEV_065C.1 = "NVIDIA Quadro FX 770M"

Outputs from the latest cvs:

nvclock -i -f
-- General info --
Card: Unknown Nvidia card
Architecture: G96 A1
PCI id: 0x0
GPU clock: -2147483.750 MHz
Bustype: PCI

-- Memory info --
Amount: 512 MB
Type: 128 bit SDR
Clock: -2147483.648 MHz


nvclock -D -f
--- Unknown Nvidia card GPU registers ---
NV_PMC_BOOT_0 (0x0): 096e00a1
NV_PBUS_DEBUG_0 (0x1080): 00000000
NV_PBUS_DEBUG_1 (0x1084): 00051469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f3030003
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 00000000
NV_PBUS_PCI_0 (0x182c): 00000000
NV_PFB_CFG0 (0x100200): 00000800
NV_PFB_CFG0 (0x100204): 01559000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 20000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 0b010907
NV_PFB_TIMING2 (0x100228): 02010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f48b016
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000

nvclock -d -T -f
m=0 n=0 p=0
m=0 n=0 p=0
m=0 n=0 p=0
m=0 n=0 p=0

[deanjo]

GTX 275

nvclock -f -i
-- General info --
Card: Unknown Nvidia card
Architecture: GT200 B1
PCI id: 0x5e6
GPU clock: 300.856 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1296.000 MHz
Stream units: 240 (11111111b)
ROP units: 28 (01111111b)
-- Memory info --
Amount: 896 MB
Type: 448 bit DDR3
Clock: 1188.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 49C
GPU temperature: 53C
Fanspeed: 1306 RPM
Fanspeed mode: manual
PWM duty cycle: 40.0%

-- VideoBios information --
Version: 62.00.60.00.01
Signon message: NVIDIA GeForce GTX 275
Performance level 0: gpu 1066779279MHz/shader 600MHz/memory 1066863165MHz/1.05V/100%
VID mask: f
Voltage level 0: 1.05V, VID: b
Voltage level 1: 1.10V, VID: 7
Voltage level 2: 1.12V, VID: 5
Voltage level 3: 1.15V, VID: 3
Voltage level 4: 1.17V, VID: 1
Voltage level 5: 1.18V, VID: 0

dean@nemicron:~> nvclock -f -D
--- Unknown Nvidia card GPU registers ---
NV_PMC_BOOT_0 (0x0): 0a0300b1
NV_PBUS_DEBUG_0 (0x1080): 00000001
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f77f03ff
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 05e610de
NV_PBUS_PCI_0 (0x182c): 17721462
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2200daa3
NV_4000 (0x4000): 80000000
NV_4004 (0x4004): 00002008
NV_4008 (0x4008): 10002200
NV_400C (0x400c): 00001602
NV_4010 (0x4010): 00001200
NV_4014 (0x4014): 00001c03
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00000000
NV_4024 (0x4024): 00000c01
NV_4028 (0x4028): 80090000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): a0090000
NV_4034 (0x4034): 00001604
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00010000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 0000e800
NV_E114 (0xe114): 00000001
NV_E118 (0xe118): 00000000
NV_E11C (0xe11c): 00000200
NV_E120 (0xe120): 00000000
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c00800c0
NV_20400 (0x20400): 00000000
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 00000800
NV_PFB_CFG0 (0x100204): 01449000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 38000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040605
NV_PFB_TIMING1 (0x100224): 09010707
NV_PFB_TIMING2 (0x100228): 00010102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 8f4098ae
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000



nvclock -d -T -f
Probing I2C busses
bus: 2 device: a0
bus: 2 device: 74
bus: 2 device: 6e
bus: 3 device: 5c
m1=4 m2=1 n1=43 n2=1 p=0
m1=6 m2=1 n1=37 n2=1 p=0
m1=4 m2=1 n1=43 n2=1 p=0
m1=6 m2=1 n1=37 n2=1 p=0
Unknown Nvidia card
=> GPU temperature: 53C
=> Board temperature: 48C
=> GPU temperature according to NV-CONTROL: 53
=> Board temperature according to NV-CONTROL: 48

[mephistopheles]

GTS 250 (Asus ENGTS250 DK/HTDI/1GD3):

nvclock -d -T

Unhandled init script entry with id '?' at c778
Unhandled init script entry with id '?' at d9cc
Unhandled init script entry with id '?' at d9ef
Unhandled init script entry with id '?' at da12
Unhandled init script entry with id '?' at da35
Probing I2C busses
m1=4 m2=1 n1=37 n2=1 p=0
m1=6 m2=1 n1=41 n2=1 p=0
nVidia GeForce GTS 250
NV_20008 (0x20008): c00835a2
divider=18.700001, offset=-13096.299805
=> GPU temperature: -404C

Temperature offset -435 relative to nvidia-settings for range 30 to 53 C.

nvclock -D

Unhandled init script entry with id '?' at c778
Unhandled init script entry with id '?' at d9cc
Unhandled init script entry with id '?' at d9ef
Unhandled init script entry with id '?' at da12
Unhandled init script entry with id '?' at da35
--- nVidia GeForce GTS 250 GPU registers ---
NV_PMC_BOOT_0 (0x0): 092a80a2
NV_PBUS_DEBUG_0 (0x1080): 00002410
NV_PBUS_DEBUG_1 (0x1084): 00041469
NV_PBUS_DEBUG_2 (0x1088): 00000000
NV_PBUS_DEBUG_3 (0x108c): 000000d1
NV_10F0 (0x10f0): 00000000
NV_1540 (0x1540): f30f00ff
NV_15B0 (0x15b0): 00000000
NV_15B4 (0x15b4): 00000000
NV_15B8 (0x15b8): 00000000
NV_15F0 (0x15f0): 00000000
NV_15F4 (0x15f4): 00000000
NV_15F8 (0x15f8): 00000000
NV_PBUS_PCI_0 (0x1800): 061510de
NV_PBUS_PCI_0 (0x182c): 82e61043
NV_C010 (0xc010): 00000000
NV_C014 (0xc014): 00000000
NV_C018 (0xc018): 00000000
NV_C01C (0xc01c): 00000000
NV_C020 (0xc020): 00000000
NV_C024 (0xc024): 00000000
NV_C028 (0xc028): 00000000
NV_C02C (0xc02c): 00000000
NV_C040 (0xc040): 2e80dea3
NV_4000 (0x4000): 00000000
NV_4004 (0x4004): 00000000
NV_4008 (0x4008): 1018e200
NV_400C (0x400c): 00002504
NV_4010 (0x4010): 00000000
NV_4014 (0x4014): 00000000
NV_4018 (0x4018): 00001200
NV_401C (0x401c): 00001c03
NV_4020 (0x4020): 00000000
NV_4024 (0x4024): 00002202
NV_4028 (0x4028): a0090000
NV_402C (0x402c): 00002707
NV_4030 (0x4030): 20120000
NV_4034 (0x4034): 00001202
NV_4038 (0x4038): 00000000
NV_403C (0x403c): 00000000
NV_4040 (0x4040): 00010000
NV_4044 (0x4044): 00010000
NV_4048 (0x4048): 00000000
NV_404C (0x404c): 00000000
NV_4050 (0x4050): 00010000
NV_4054 (0x4054): 00000000
NV_4058 (0x4058): 00000000
NV_405C (0x405c): 00000000
NV_4060 (0x4060): 00010000
NV_E100 (0xe100): 00004910
NV_E114 (0xe114): 00001047
NV_E118 (0xe118): 000005b2
NV_E11C (0xe11c): 00000001
NV_E120 (0xe120): 00000000
NV_E300 (0xe300): 00000100
NV_20008 (0x20008): c00835a2
NV_20400 (0x20400): 0000001f
NV_PDISPLAY_SOR0_REGS_BRIGHTNESS(c084): 00000000
NV_PFB_CFG0 (0x100200): 01001800
NV_PFB_CFG0 (0x100204): 01559000
NV_PFB_CFG0 (0x100208): 00000000
NV_PFB_CFG0 (0x10020c): 40000000
NV_PFB_218 (0x100218): 01000101
NV_PFB_TIMING0 (0x100220): 02040606
NV_PFB_TIMING1 (0x100224): 0d010905
NV_PFB_TIMING2 (0x100228): 02020102
NV_PFB_474 (0x100474): 00000000
NV_PEXTDEV_BOOT_0 (0x101000): 9f42949a
NV_NVPLL_COEFF_A (0x680500): 00000000
NV_MPLL_COEFF_A (0x680504): 00000000
NV_VPLL_COEFF (0x680508): 00000000
NV_PLL_COEFF_SELECT (0x68050c): 00000000
NV_NVPLL_COEFF_B (0x680570: 00000000
NV_MPLL_COEFF_B (0x680574: 00000000


nvclock -i
Unhandled init script entry with id '?' at c778
Unhandled init script entry with id '?' at d9cc
Unhandled init script entry with id '?' at d9ef
Unhandled init script entry with id '?' at da12
Unhandled init script entry with id '?' at da35
-- General info --
Card: nVidia GeForce GTS 250
Architecture: G92 A2
PCI id: 0x615
GPU clock: 300.856 MHz
Bustype: PCI-Express

-- Shader info --
Clock: 1836.000 MHz
Stream units: 128 (11111111b)
ROP units: 16 (1111b)
-- Memory info --
Amount: 1024 MB
Type: 256 bit DDR3
Clock: 999.000 MHz

-- PCI-Express info --
Current Rate: 16X
Maximum rate: 16X

-- Sensor info --
Sensor: GPU Internal Sensor
GPU temperature: -404C

-- VideoBios information --
Version: 62.92.7d.00.10
Signon message: GTS250 DK VB Ver 62.92.7D.00.AS03
Performance level 0: gpu 300MHz/shader 600MHz/memory 100MHz/0.95V/100%
Performance level 1: gpu 740MHz/shader 1836MHz/memory 1000MHz/1.20V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.10V, VID: 1
Voltage level 2: 1.20V, VID: 2
Voltage level 3: 1.30V, VID: 3

*** stack smashing detected ***: nvclock terminated
======= Backtrace: =========
/lib/libc.so.6(__fortify_fail+0x37)[0x7f999700c2c7]
/lib/libc.so.6(__fortify_fail+0x0)[0x7f999700c290]
nvclock[0x401cd9]
/lib/libc.so.6(__libc_start_main+0xe6)[0x7f9996f2b5a6]
nvclock[0x401379]
======= Memory map: ========
00400000-0041d000 r-xp 00000000 08:05 4120994 /usr/local/bin/nvclock
0061c000-0061d000 rw-p 0001c000 08:05 4120994 /usr/local/bin/nvclock
0061d000-0061e000 rw-p 0061d000 00:00 0
00c7f000-00ca0000 rw-p 00c7f000 00:00 0 [heap]
7f9996cf5000-7f9996d0b000 r-xp 00000000 08:05 1531968 /lib/libgcc_s.so.1
7f9996d0b000-7f9996f0b000 ---p 00016000 08:05 1531968 /lib/libgcc_s.so.1
7f9996f0b000-7f9996f0c000 r--p 00016000 08:05 1531968 /lib/libgcc_s.so.1
7f9996f0c000-7f9996f0d000 rw-p 00017000 08:05 1531968 /lib/libgcc_s.so.1
7f9996f0d000-7f9997075000 r-xp 00000000 08:05 1531921 /lib/libc-2.9.so
7f9997075000-7f9997275000 ---p 00168000 08:05 1531921 /lib/libc-2.9.so
7f9997275000-7f9997279000 r--p 00168000 08:05 1531921 /lib/libc-2.9.so
7f9997279000-7f999727a000 rw-p 0016c000 08:05 1531921 /lib/libc-2.9.so
7f999727a000-7f999727f000 rw-p 7f999727a000 00:00 0
7f999727f000-7f999729f000 r-xp 00000000 08:05 1531918 /lib/ld-2.9.so
7f999733f000-7f9997340000 rw-p 7f999733f000 00:00 0
7f9997340000-7f9997341000 rw-s fa088000 00:0e 20494 /dev/nvidia0
7f9997341000-7f9997351000 rw-s fa300000 00:0e 20494 /dev/nvidia0
7f9997351000-7f9997451000 rw-s fa700000 00:0e 20494 /dev/nvidia0
7f9997451000-7f9997481000 rw-s fa000000 00:0e 20494 /dev/nvidia0
7f9997481000-7f9997483000 rw-p 7f9997481000 00:00 0
7f9997484000-7f9997485000 rw-s fa088000 00:0e 20494 /dev/nvidia0
7f9997485000-7f9997487000 rw-s fa680000 00:0e 20494 /dev/nvidia0
7f9997487000-7f9997497000 rw-s fa610000 00:0e 20494 /dev/nvidia0
7f9997497000-7f9997499000 rw-s fa601000 00:0e 20494 /dev/nvidia0
7f9997499000-7f999749a000 rw-s fa100000 00:0e 20494 /dev/nvidia0
7f999749a000-7f999749b000 rw-s fa101000 00:0e 20494 /dev/nvidia0
7f999749b000-7f999749e000 rw-p 7f999749b000 00:00 0
7f999749e000-7f999749f000 r--p 0001f000 08:05 1531918 /lib/ld-2.9.so
7f999749f000-7f99974a0000 rw-p 00020000 08:05 1531918 /lib/ld-2.9.so
7fff9f48b000-7fff9f4a0000 rw-p 7ffffffea000 00:00 0 [stack]
7fff9f5ff000-7fff9f600000 r-xp 7fff9f5ff000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Aborted


PS: Got a compile error for csv source downloaded today - missing comma in info.c