phoronix
04-13-2007, 10:24 AM
This is an entry for Phoronix LCH (http://www.phoronix.net/forums/showthread.php?p=6635#post6635). Feel free to comment on the Linux compatibility for the Seagate Barracuda 7200.7 SATA (ST3200822AS) in this thread.
Seagate Barracuda 7200.7 SATA (ST3200822AS)
Description: Model Number:ST3200822AS Capacity:200 GB Speed:7200 rpm Seek time:8.5 ms avg Interface:SATA 1.5Gb/s
Hardware Notes: Keep a close watch on temperatures for this HD.
hdparm -I /dev/sdc
/dev/sdc:
ATA device, with non-removable media
Model Number: ST3200822AS
Serial Number: 4LJ06GNR
Firmware Revision: 3.01
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 390721968
device size with M = 1024*1024: 190782 MBytes
device size with M = 1000*1000: 200049 MBytes (200 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Seagate Barracuda 7200.7 SATA (ST3200822AS)
Description: Model Number:ST3200822AS Capacity:200 GB Speed:7200 rpm Seek time:8.5 ms avg Interface:SATA 1.5Gb/s
Hardware Notes: Keep a close watch on temperatures for this HD.
hdparm -I /dev/sdc
/dev/sdc:
ATA device, with non-removable media
Model Number: ST3200822AS
Serial Number: 4LJ06GNR
Firmware Revision: 3.01
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 390721968
device size with M = 1024*1024: 190782 MBytes
device size with M = 1000*1000: 200049 MBytes (200 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct