Beryl with open source drivers (mesa)... problem

[jacksmash]

Hi,

A couple of weeks ago I got the ATI proprietary drivers working fine with my Radeon 9550. Today I uninstalled them to see if I might get Beryl working with the open source drivers.

Here's some info:


glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x65 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon



Here's my xorg.conf:


# Xorg configuration created by system-config-display

Section "Extensions"
Option "Composite" "Enable"
Option "AIGLX" "False"
EndSection

Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" LeftOf "Screen1"
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "radeon"
Option "AllowGLXWithComposite" "True"
Option "AddARGBGLXVisuals" "True"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "radeon"
VendorName "Videocard Vendor"
BoardName "ATI Technologies Inc RV350 AS [Radeon 9550]"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection



And here's what I get when I try to run beryl:


Window manager warning: Lost connection to the display ':0.0';
most likely the X server was shut down or you killed/destroyed
the window manager.
************************************************** ************
* Beryl system compatiblity check *
************************************************** ************

Detected xserver : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : failed

No RandR extension
beryl: No RandR extension



What on earth is that RandR extension thing? Any ideas?

Thanks!

[Michael]

Does it work if you run the system in single head only?

[jacksmash]

Ok - that seems to have worked. Does that mean I can't run it in dual-mode??

[glussier]

If you want to run a dual monitor setup and still retain your 3d opengl acceleration, you'll have to use MergedB instead of Xinerama. Note that the opensource drivers are limited to 2048 total width.

Here's an example of how the device section should look:


Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon 9600Pro"
Option "MergedFB" "true"
Option "ColorTiling" "on"
Option "AddARGBGLXVisuals" "True"
Option "MonitorLayout" "CRT,CRT"
Option "CRT2HSync" "30-54"
Option "CRT2VRefresh" "50-110"
Option "CRT2Position" "RightOf"
Option "MergedXinerama" "true"
Option "PanelSize" "1024x768"
BusID "PCI:2:0:0"
EndSection

[jacksmash]

hmm... never heard of MergedB. Is it something I have to install? When I add the above to my xorg.conf it just crashes.

[jacksmash]

Actaully, now that I think about it... it seems I won't be able to run my two 19" monitors at 1280x1024 anyhow... so I won't worry about it.

Bottom line: If you're using linux... don't buy ATI. Stick with NVIDIA! Many less headaches!

[JonC]

OK, I just wanted to clear a few misconceptions up in this thread.

MergedFB is built in to the open driver, there is nothing to install.

You can go above 2048 with the open driver fine, so long as your card is an R300 or above chip, which the 9550 is. I am pretty sure it is R300 and up, but I am using an RV370 based card. The 2048 limit is a hardware, not driver, limit.

That said, Beryl will only support textures up to 2048. So Beryl will not properly work on wider setups.

So the open driver will work happily for your setup, but no Beryl. If that is the only reason you wanted the open driver, you might as well wait until Beryl supports wider textures.