amdcccle - Resource temporarily unavailable

[Xipeos]

Hello,

I have recently upgraded my X.org server from the standard X11R6.9 from the slackware CD to X.org 7.2 built from tarballs. Now amdcccle doesn't start anymore, and #strace amdcccle shows

read(9, 0x878c3b8, 8) = -1 EAGAIN (Resource temporarily unavailable)
select(10, [9], NULL, NULL, NULL

I'm running the latest kernel version, and fglrx 8.37.6. xcb was built with -DNDEBUG to avoid the assertion error

Can anyone help me?

LATER EDIT: maybe I didn't give enough information.
Here's the full strace log: http://rafb.net/p/LtSGKv40.txt
and my xorg.conf: http://rafb.net/p/y5pL0C19.txt
and Xorg.0.log: http://rafb.net/p/huS4Y219.txt
also ldd amdcccle:
# ldd /usr/bin/amdcccle
linux-gate.so.1 => (0xb7f94000)
libICE.so.6 => /usr/X11/lib/libICE.so.6 (0xb7f7b000)
libSM.so.6 => /usr/X11/lib/libSM.so.6 (0xb7f72000)
libdl.so.2 => /usr/lib/libdl.so.2 (0xb7f50000)
libXext.so.6 => /usr/X11/lib/libXext.so.6 (0xb7f42000)
libX11.so.6 => /usr/X11/lib/libX11.so.6 (0xb7e59000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb7e2e000)
libXrender.so.1 => /usr/X11/lib/libXrender.so.1 (0xb7e26000)
libXrandr.so.2 => /usr/X11/lib/libXrandr.so.2 (0xb7e23000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb7db6000)
libXcursor.so.1 => /usr/X11/lib/libXcursor.so.1 (0xb7dad000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7d95000)
libXi.so.6 => /usr/X11/lib/libXi.so.6 (0xb7d8d000)
libGL.so.1 => /usr/lib/xorg/libGL.so.1 (0xb7ced000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xb7c35000)
libm.so.6 => /lib/libm.so.6 (0xb7c0e000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb7c03000)
libc.so.6 => /lib/libc.so.6 (0xb7ac0000)
/lib/ld-linux.so.2 (0xb7f95000)
libXau.so.6 => /usr/X11R7.2/lib/libXau.so.6 (0xb7abd000)
libxcb-xlib.so.0 => /usr/X11/lib/libxcb-xlib.so.0 (0xb7abb000)
libxcb.so.1 => /usr/X11/lib/libxcb.so.1 (0xb7aa2000)
libz.so.1 => /usr/lib/libz.so.1 (0xb7a8e000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb7a6e000)
libXfixes.so.3 => /usr/X11R7.2/lib/libXfixes.so.3 (0xb7a69000)
libXdmcp.so.6 => /usr/X11R7.2/lib/libXdmcp.so.6 (0xb7a64000)

[lenrek]

Reading from ATI release note:


Before attempting to install the ATI Catalyst™ Linux software suite, the following software must be installed:


XOrg 6.7, 6.8, 6.9, 7.0, or 7.1; XFree86 version 4.3
Linux kernel 2.4 or higher
glibc version 2.2 or 2.3
POSIX Shared Memory (/dev/shm) support is required for 3D applications

The ATI Catalyst™ Linux software suite no longer provides precompiled Kernel Modules; all installations require GCC compiler and kernel-headers or kernel-source in order to enable 2D and 3D acceleration.

For best performance and ease of use, AMD recommends the following:

Kernel module build environment - should include the following:

Kernel source code: Either the Kernel Source or Kernel Headers packages

ISSE Support enabled in your Linux Kernel

Applies to Intel Pentium III and later CPUs only
Enabled by default on version 2.4 and later kernels

The rpm utility should be installed and configured correctly on your system, if you intend to install via RPM packages
QT version 2.x.x is needed for the ATI Control Panel, but is not mandatory


Note: The following 32 bit packages must be installed in order for 64 bit drivers to install and work properly (the package names are from Red Hat Enterprise Linux, other distribution package names may vary): · XFree86-Mesa-libGL*

libstdc++
libgcc
XFree86-libs
fontconfig
expat
freetype
zlib



from: here (https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.37.6.html#183074)

Notice the text in bold, there is no mention of 7.2 - This one of the reason why I have not try out Slack-current on my Laptop that is using ATI.

Good luck!

[Xipeos]

Thank you for your reply.
I previously tried it with Xorg 7.1.99 from the (unmaintained?) git repository which had a release date of December 2005. Both my current version and 7.1.99 were built from sources as described on http://wiki.x.org/wiki/ModularDevelopersGuide and not from the slackware repositores.

Also, the new driver installer detects it as "Xorg 7.1 or later" and properly installs (unlike the previous ones - you had to export X_VERSION="x710").

Because of this, I don't think the Xorg version is the problem - probably some of the configuration files or some bad library links. I was hoping the strace log can show something, but I'm not experienced enough to see it. If I need to post more info, please tell me.

[Michael]

The driver DOES support X.Org 7.2.

[Xipeos]

Maybe I'm off the track with the strace log and everything. On a higher level, when I start amdccle, it just "runs" without error messages on any channel (stderr, syslog, etc) and with negligible memory and cpu consumption, but nothing else happens (even after a long time).

[Xipeos]

I now noticed that I have the same problem with aticonfig IF the xserver is running. For example I do
# aticonfig --enable-monitor=crt1
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-0



and then it "freezes" the same way that amdcccle does, and strace shows the same (or similar?) "Resource temporarily unvailable" error.

Any suggestion is appreciated.