Trying to test r300+radeon GIT, but only see a black screen [Archive]

View Full Version : Trying to test r300+radeon GIT, but only see a black screen

a_villacis

06-08-2007, 08:27 PM

Hello,

I am currently using Fedora Core 6. My current Xorg (7.1) works quite nicely for 2D in a "ATI Radeon XPRESS 200 5A61 (PCIE)", but there is no 3D support. As it is the case for many ATI users, the fglrx does not support AIGLX on my setup. So I decided I would try building the latest Xorg from sources and run it from my home directory, in order to enable accelerated AIGLX.

All packages marked as -git.tar.bz2 were current up to 2007/06/08. In addition I downloaded the latest Mesa sources from GIT.

Compilation went so-so, because I omitted several input drivers that have not been updated to work with the latest xorg-server git. Only compiled xf86-input-keyboard and xf86-input-mouse . However, when I try to run the compiled X server (with LD_LIBRARY_PATH and PATH set to corresponding bin and lib directories), all I get is a black screen. My monitor seems to shut down (the green LED beside the power button turns orange and blinks) and I see nothing on my screen. In addition, the keyboard is unresponsive and therefore Ctrl-Alt-Backspace seems to have no effect.

By sshing into my computer from another location, I see my computer is still up and responding, only the console is screwed up. I have tried adding options to the Driver section of my xorg.conf to no avail. Maybe I am doing something stupid. However, the crash at the end of the logs does not occur when the console is screwed, but only when I order the computer to reboot remotely through ssh.

a_villacis

06-08-2007, 08:29 PM

applewmproto-X11R7.0-1.0.3.tar.bz2
appres-X11R7.2-1.0.1.tar.bz2
bdftopcf-X11R7.0-1.0.0.tar.bz2
beforelight-X11R7.2-1.0.2.tar.bz2
bigreqsproto-X11R7.0-1.0.2.tar.bz2
bitmap-X11R7.1-1.0.2.tar.bz2
compositeproto-X11R7.1-0.3.1.tar.bz2
damageproto-git.tar.bz2
dmxproto-X11R7.0-2.2.2.tar.bz2
drm-git.tar.bz2
editres-X11R7.2-1.0.2.tar.bz2
encodings-X11R7.2-1.0.2.tar.bz2
evieext-X11R7.0-1.0.2.tar.bz2
fixesproto-X11R7.1-4.0.tar.bz2
fslsfonts-X11R7.0-1.0.1.tar.bz2
fstobdf-X11R7.1-1.0.2.tar.bz2
gccmakedep-X11R7.1-1.0.2.tar.bz2
glproto-X11R7.2-1.4.8.tar.bz2
iceauth-X11R7.0-1.0.1.tar.bz2
ico-X11R7.0-1.0.1.tar.bz2
imake-X11R7.1-1.0.2.tar.bz2
inputproto-git.tar.bz2
kbproto-X11R7.2-1.0.3.tar.bz2
lbxproxy-X11R7.0-1.0.1.tar.bz2
libAppleWM-X11R7.0-1.0.0.tar.bz2
libdmx-X11R7.1-1.0.2.tar.bz2
libfontenc-X11R7.2-1.0.4.tar.bz2
libFS-X11R7.0-1.0.0.tar.bz2
libICE-X11R7.2-1.0.3.tar.bz2
liblbxutil-X11R7.1-1.0.1.tar.bz2
liboldX-X11R7.0-1.0.1.tar.bz2
libpthread-stubs-0.1.tar.bz2
libSM-X11R7.2-1.0.2.tar.bz2
libWindowsWM-X11R7.0-1.0.0.tar.bz2
libX11-X11R7.2-1.1.1.tar.bz2
libXau-X11R7.2-1.0.3.tar.bz2
libXaw-X11R7.1-1.0.2.tar.bz2
libxcb-1.0.tar.bz2
libXcomposite-X11R7.2-0.3.1.tar.bz2
libXcursor-X11R7.2-1.1.8.tar.bz2
libXdamage-git.tar.bz2
libXdmcp-X11R7.2-1.0.2.tar.bz2
libXevie-X11R7.2-1.0.2.tar.bz2
libXext-X11R7.2-1.0.2.tar.bz2
libXfixes-X11R7.2-4.0.3.tar.bz2
libXfontcache-X11R7.2-1.0.4.tar.bz2
libXfont-X11R7.2-1.2.7.tar.bz2
libXft-X11R7.2-2.1.12.tar.bz2
libXinerama-X11R7.0-1.0.1.tar.bz2
libXi-X11R7.2-1.0.2.tar.bz2
libxkbfile-X11R7.2-1.0.4.tar.bz2
libxkbui-X11R7.1-1.0.2.tar.bz2
libXmu-X11R7.2-1.0.3.tar.bz2
libXpm-X11R7.2-3.5.6.tar.bz2
libXprintAppUtil-X11R7.0-1.0.1.tar.bz2
libXprintUtil-X11R7.0-1.0.1.tar.bz2
libXp-X11R7.0-1.0.0.tar.bz2
libXrandr-git.tar.bz2
libXrender-X11R7.2-0.9.2.tar.bz2
libXres-X11R7.2-1.0.3.tar.bz2
libXScrnSaver-X11R7.2-1.1.2.tar.bz2
libXTrap-X11R7.0-1.0.0.tar.bz2
libXtst-X11R7.0-1.0.1.tar.bz2
libXt-X11R7.2-1.0.4.tar.bz2
libXvMC-X11R7.2-1.0.4.tar.bz2
libXv-X11R7.2-1.0.3.tar.bz2
libXxf86dga-X11R7.1-1.0.1.tar.bz2
libXxf86misc-X11R7.1-1.0.1.tar.bz2
libXxf86vm-X11R7.1-1.0.1.tar.bz2
listres-X11R7.0-1.0.1.tar.bz2
lndir-X11R7.0-1.0.1.tar.bz2
luit-X11R7.2-1.0.2.tar.bz2
makedepend-X11R7.0-1.0.0.tar.bz2
MesaDemos-6.5.3.tar.bz2
MesaGLUT-6.5.3.tar.bz2
MesaLib-6.5.3.tar.bz2
mkfontdir-X11R7.1-1.0.2.tar.bz2
mkfontscale-X11R7.2-1.0.3.tar.bz2
oclock-X11R7.0-1.0.1.tar.bz2
pixman-git.tar.bz2
printproto-X11R7.0-1.0.3.tar.bz2
proxymngr-X11R7.0-1.0.1.tar.bz2
randrproto-git.tar.bz2
recordproto-X11R7.0-1.13.2.tar.bz2
renderproto-X11R7.0-0.9.2.tar.bz2
resourceproto-X11R7.0-1.0.2.tar.bz2
rgb-X11R7.1-1.0.1.tar.bz2
rstart-X11R7.1-1.0.2.tar.bz2
scripts-X11R7.0-1.0.1.tar.bz2
scrnsaverproto-X11R7.1-1.1.0.tar.bz2
sessreg-X11R7.2-1.0.2.tar.bz2
setxkbmap-X11R7.2-1.0.3.tar.bz2
showfont-X11R7.0-1.0.1.tar.bz2
smproxy-X11R7.1-1.0.2.tar.bz2
trapproto-X11R7.0-3.4.3.tar.bz2
twm-X11R7.2-1.0.3.tar.bz2
util-macros-X11R7.2-1.1.5.tar.bz2
videoproto-X11R7.0-2.2.2.tar.bz2
viewres-X11R7.0-1.0.1.tar.bz2
windowswmproto-X11R7.0-1.0.3.tar.bz2
x11perf-X11R7.1-1.4.1.tar.bz2
xauth-X11R7.2-1.0.2.tar.bz2
xbiff-X11R7.0-1.0.1.tar.bz2
xbitmaps-X11R7.0-1.0.1.tar.bz2
xcalc-X11R7.0-1.0.1.tar.bz2
xcb-proto-1.0.tar.bz2
xcb-util-0.2.tar.bz2
xclipboard-X11R7.0-1.0.1.tar.bz2
xclock-X11R7.1-1.0.2.tar.bz2
xcmiscproto-X11R7.0-1.1.2.tar.bz2
xcmsdb-X11R7.0-1.0.1.tar.bz2
xconsole-X11R7.1-1.0.2.tar.bz2
xcursorgen-X11R7.1-1.0.1.tar.bz2
xcursor-themes-X11R7.0-1.0.1.tar.bz2
xdbedizzy-X11R7.2-1.0.2.tar.bz2
xditview-X11R7.0-1.0.1.tar.bz2
xdm-X11R7.2-1.1.3.tar.bz2
xdpyinfo-X11R7.0-1.0.1.tar.bz2
xdriinfo-X11R7.1-1.0.1.tar.bz2
xedit-X11R7.1-1.0.2.tar.bz2
xev-X11R7.0-1.0.1.tar.bz2
xextproto-X11R7.0-7.0.2.tar.bz2
xeyes-X11R7.0-1.0.1.tar.bz2
xf86bigfontproto-X11R7.0-1.1.2.tar.bz2
xf86dgaproto-X11R7.0-2.0.2.tar.bz2
xf86dga-X11R7.2-1.0.2.tar.bz2
xf86driproto-X11R7.0-2.0.3.tar.bz2
xf86-input-acecad-X11R7.1-1.1.0.tar.bz2
xf86-input-aiptek-X11R7.1-1.0.1.tar.bz2
xf86-input-calcomp-X11R7.1-1.1.0.tar.bz2
xf86-input-citron-X11R7.1-2.2.0.tar.bz2
xf86-input-digitaledge-X11R7.1-1.1.0.tar.bz2
xf86-input-dmc-X11R7.1-1.1.0.tar.bz2
xf86-input-dynapro-X11R7.1-1.1.0.tar.bz2
xf86-input-elo2300-X11R7.1-1.1.0.tar.bz2
xf86-input-elographics-X11R7.0-1.0.0.5.tar.bz2
xf86-input-evdev-git.tar.bz2
xf86-input-fpit-X11R7.1-1.1.0.tar.bz2
xf86-input-hyperpen-X11R7.1-1.1.0.tar.bz2
xf86-input-jamstudio-X11R7.1-1.1.0.tar.bz2
xf86-input-joystick-X11R7.1-1.1.0.tar.bz2
xf86-input-keyboard-git.tar.bz2
xf86-input-magellan-X11R7.1-1.1.0.tar.bz2
xf86-input-magictouch-X11R7.1-1.0.0.5.tar.bz2
xf86-input-microtouch-X11R7.1-1.1.0.tar.bz2
xf86-input-mouse-git.tar.bz2
xf86-input-mutouch-X11R7.1-1.1.0.tar.bz2
xf86-input-palmax-X11R7.1-1.1.0.tar.bz2
xf86-input-penmount-X11R7.2-1.2.0.tar.bz2
xf86-input-spaceorb-X11R7.1-1.1.0.tar.bz2
xf86-input-summa-X11R7.1-1.1.0.tar.bz2
xf86-input-tek4957-X11R7.1-1.1.0.tar.bz2
xf86-input-ur98-X11R7.1-1.1.0.tar.bz2
xf86-input-vmmouse-git.tar.bz2
xf86-input-void-X11R7.1-1.1.0.tar.bz2
xf86miscproto-X11R7.0-0.9.2.tar.bz2
xf86rushproto-X11R7.0-1.1.2.tar.bz2
xf86-video-apm-X11R7.1-1.1.1.tar.bz2
xf86-video-ark-X11R7.1-0.6.0.tar.bz2
xf86-video-ast-X11R7.1-0.81.0.tar.bz2
xf86-video-ati-git.tar.bz2
xf86-video-chips-X11R7.1-1.1.1.tar.bz2
xf86-video-cirrus-X11R7.1-1.1.0.tar.bz2
xf86-video-cyrix-X11R7.1-1.1.0.tar.bz2
xf86-video-dummy-X11R7.1-0.2.0.tar.bz2
xf86-video-fbdev-X11R7.2-0.3.1.tar.bz2
xf86-video-glint-X11R7.1-1.1.1.tar.bz2
xf86-video-i128-X11R7.2-1.2.1.tar.bz2
xf86-video-i740-X11R7.1-1.1.0.tar.bz2
xf86-video-i810-X11R7.2-1.6.5.tar.bz2
xf86-video-imstt-X11R7.1-1.1.0.tar.bz2
xf86-video-mga-X11R7.2-1.4.6.1.tar.bz2
xf86-video-neomagic-X11R7.1-1.1.1.tar.bz2
xf86-video-newport-X11R7.2-0.2.1.tar.bz2
xf86-video-nsc-X11R7.2-2.8.2.tar.bz2
xf86-video-nv-X11R7.2-1.2.2.1.tar.bz2
xf86-video-rendition-X11R7.2-4.1.3.tar.bz2
xf86-video-s3virge-X11R7.1-1.9.1.tar.bz2
xf86-video-s3-X11R7.2-0.5.0.tar.bz2
xf86-video-savage-git.tar.bz2
xf86-video-siliconmotion-X11R7.2-1.4.2.tar.bz2
xf86-video-sisusb-X11R7.1-0.8.1.tar.bz2
xf86-video-sis-X11R7.2-0.9.3.tar.bz2
xf86-video-sunbw2-X11R7.1-1.1.0.tar.bz2
xf86-video-suncg14-X11R7.1-1.1.0.tar.bz2
xf86-video-suncg3-X11R7.1-1.1.0.tar.bz2
xf86-video-suncg6-X11R7.1-1.1.0.tar.bz2
xf86-video-sunffb-X11R7.1-1.1.0.tar.bz2
xf86-video-sunleo-X11R7.1-1.1.0.tar.bz2
xf86-video-suntcx-X11R7.1-1.1.0.tar.bz2
xf86-video-tdfx-X11R7.2-1.3.0.tar.bz2
xf86-video-tga-X11R7.1-1.1.0.tar.bz2
xf86-video-trident-X11R7.2-1.2.3.tar.bz2
xf86-video-tseng-X11R7.2-1.1.1.tar.bz2
xf86-video-v4l-X11R7.1-0.1.1.tar.bz2
xf86-video-vesa-X11R7.2-1.3.0.tar.bz2
xf86-video-vga-X11R7.1-4.1.0.tar.bz2
xf86-video-via-X11R7.2-0.2.2.tar.bz2
xf86-video-vmware-X11R7.2-10.14.1.tar.bz2
xf86-video-voodoo-X11R7.2-1.1.1.tar.bz2
xf86vidmodeproto-X11R7.0-2.2.2.tar.bz2
xfd-X11R7.0-1.0.1.tar.bz2
xfindproxy-X11R7.0-1.0.1.tar.bz2
xfontsel-X11R7.0-1.0.1.tar.bz2
xfsinfo-X11R7.0-1.0.1.tar.bz2
xfs-X11R7.2-1.0.4.tar.bz2
xfwp-X11R7.0-1.0.1.tar.bz2
xgamma-X11R7.0-1.0.1.tar.bz2
xgc-X11R7.0-1.0.1.tar.bz2
xhost-X11R7.1-1.0.1.tar.bz2
xineramaproto-X11R7.0-1.1.2.tar.bz2
xinit-X11R7.2-1.0.3.tar.bz2
xkbcomp-X11R7.2-1.0.3.tar.bz2
xkbevd-X11R7.1-1.0.2.tar.bz2
xkbprint-X11R7.0-1.0.1.tar.bz2
xkbutils-X11R7.0-1.0.1.tar.bz2
xkill-X11R7.0-1.0.1.tar.bz2
xload-X11R7.0-1.0.1.tar.bz2
xlogo-X11R7.0-1.0.1.tar.bz2
xlsatoms-X11R7.0-1.0.1.tar.bz2
xlsclients-X11R7.0-1.0.1.tar.bz2
xlsfonts-X11R7.0-1.0.1.tar.bz2
xmag-X11R7.0-1.0.1.tar.bz2
xman-X11R7.1-1.0.2.tar.bz2
xmessage-X11R7.0-1.0.1.tar.bz2
xmh-X11R7.0-1.0.1.tar.bz2
xmodmap-X11R7.2-1.0.2.tar.bz2
xmore-X11R7.0-1.0.1.tar.bz2
xorg-cf-files-X11R7.1-1.0.2.tar.bz2
xorg-docs-X11R7.1-1.2.tar.bz2
xorg-server-git.tar.bz2
xorg-sgml-doctools-X11R7.2-1.1.1.tar.bz2
xphelloworld-X11R7.0-1.0.1.tar.bz2
xplsprinters-X11R7.0-1.0.1.tar.bz2
xprehashprinterlist-X11R7.0-1.0.1.tar.bz2
xprop-X11R7.2-1.0.2.tar.bz2
xproto-X11R7.2-7.0.10.tar.bz2
xproxymanagementprotocol-X11R7.0-1.0.2.tar.bz2
xpr-X11R7.0-1.0.1.tar.bz2
xrandr-X11R7.1-1.0.2.tar.bz2
xrdb-X11R7.1-1.0.2.tar.bz2
xrefresh-X11R7.1-1.0.2.tar.bz2
xrx-X11R7.0-1.0.1.tar.bz2
xsetmode-X11R7.0-1.0.0.tar.bz2
xsetpointer-X11R7.0-1.0.0.tar.bz2
xsetroot-X11R7.0-1.0.1.tar.bz2
xset-X11R7.1-1.0.2.tar.bz2
xsm-X11R7.0-1.0.1.tar.bz2
xstdcmap-X11R7.0-1.0.1.tar.bz2
xtrans-X11R7.2-1.0.3.tar.bz2
xtrap-X11R7.1-1.0.2.tar.bz2
xvidtune-X11R7.0-1.0.1.tar.bz2
xvinfo-X11R7.0-1.0.1.tar.bz2
xwd-X11R7.0-1.0.1.tar.bz2
xwininfo-X11R7.1-1.0.2.tar.bz2
xwud-X11R7.0-1.0.1.tar.bz2

a_villacis

06-08-2007, 08:29 PM

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/home/alex/Xorg-7.2/lib/xorg/modules"
EndSection

Section "Module"
Load "glx"
Load "extmod"
Load "dri"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
ModelName "Samsung SyncMaster 700(M)s (CGE7507*)"
### Comment all HorizSync and VertSync values to use DDC:
# HorizSync 30.0 - 69.5
# VertRefresh 50.0 - 160.0
# Gamma 2.08
# ModeLine "1400x1050" 129.6 1400 1488 1640 1880 1050 1051 1054 1089 -hsync +vsync
# Option "dpms"
EndSection

Section "Device"

Driver "ati"
# Option "UseInternalAGPGART" "off"
Identifier "Videocard0"
# Driver "fglrx"
# Option "VideoOverlay" "on"
# Option "OpenGLOverlay" "off"
# Option "MergedFB" "off"
Option "MonitorLayout" "CRT,NONE"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Section "DRI"
Mode 0666
EndSection

a_villacis

06-08-2007, 08:30 PM

X Window System Version 7.2.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.6.20-1.2952.fc6 i686
Current Operating System: Linux srv64.palosanto.com 2.6.20-1.2952.fc6 #1 SMP Wed May 16 18:59:18 EDT 2007 i686
Build Date: 06 June 2007 07:55:1181177751PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/alex/Xorg-7.2/var/log/Xorg.0.log", Time: Fri Jun 8 17:39:19 2007
(++) Using config file: "/home/alex/Xorg-7.2/etc/X11/xorg-user.conf"
(II) Module already built-in
(II) Module already built-in
(II) Module already built-in

+H +V
Warning, xpress200 detected.
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)

waiting for X server to shut down xterm: fatal IO error 32 (Tubería rota) or KillClient on X server ":0.0"

Backtrace:
0: X(xf86SigHandler+0x7e) [0x80b1f8e]
1: [0x3f4420]
2: /home/alex/Xorg-7.2/lib/xorg/modules/drivers//radeon_drv.so(RADEONDisplayPowerManagementSet+0x12 2) [0x92f922]
3: /home/alex/Xorg-7.2/lib/xorg/modules/drivers//radeon_drv.so [0x91dad8]
4: X [0x815cf87]
5: X [0x80b30fc]
6: X [0x80bd7f9]
7: X [0x8137148]
8: X [0x815a86b]
9: X [0x80fbdf5]
10: X(main+0x513) [0x806f023]
11: /lib/libc.so.6(__libc_start_main+0xdc) [0xae5f2c]
12: X(FontFileCompleteXLFD+0x209) [0x806e2d1]

Fatal server error:
Caught signal 11. Server aborting

a_villacis

06-08-2007, 08:32 PM

(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5A61 (PCIE)" (ChipID = 0x5a61)
(--) RADEON(0): Linear framebuffer at 0xd8000000
(II) RADEON(0): PCI card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (256 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-0, DACType--1, TMDSType--1, ConnectorType-0
(**) RADEON(0): MonitorLayout Option:
Monitor1--Type CRT, Monitor2--Type NONE

(II) RADEON(0):
(II) RADEON(0): Port1:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- External
DDC Type -- VGA_DDC
(II) RADEON(0): Port2:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- External
DDC Type -- VGA_DDC
(II) RADEON(0): ---- Primary Head: Port1 ----
(II) RADEON(0): ---- Secondary Head: Port2 ----
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=20000
(WW) RADEON(0): Failed to detect secondary monitor DDC, default HSync and VRefresh used
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) RADEON(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz

Xipeos

06-09-2007, 02:33 AM

Backtrace:
0: X(xf86SigHandler+0x7e) [0x80b1f8e]
1: [0x3f4420]
2: /home/alex/Xorg-7.2/lib/xorg/modules/drivers//radeon_drv.so(RADEONDisplayPowerManagementSet+0x12 2) [0x92f922]
3: /home/alex/Xorg-7.2/lib/xorg/modules/drivers//radeon_drv.so [0x91dad8]

I'd say the driver from git isn't that stable. Get the stable from http://xorg.freedesktop.org/releases/X11R7.2/src/everything/xf86-video-ati-X11R7.2-6.6.3.tar.bz2
For DRI get the latest Mesa3D (http://www.mesa3d.org) and compile with "make linux-dri" (you may have to edit some conf files).

OR

Your current X.org (or driver?) is overzealous about D-BUS
[dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.3" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
I've never seen dbus cause X server problems before though

And your X server is too old (Release Date: 21 December 2005 ?). For stable 7.2, it should be 22 January 2007

yoshi314

06-09-2007, 04:50 AM

i also had issues with some git built after 6.6.3 with exact same symptoms, a couple of months ago.

i'll try again with new git snapshot after i get my x300 card back from my friend.

adamk

06-09-2007, 03:48 PM

I'm not sure I can help with debugging your problems, but I can tell you that I have the latest ati driver installed on my system, the latest DRM, and the latest DRI driver (all pulled from git within the last week).

Just so you know, while 3D acceleration is now supported on those Xpress chipsets, compiz and beryl do not work. They both crash the X server. Most mesa demos work, various GL screensavers work, and googleearth work. That's about it :-)

Adam

a_villacis

06-11-2007, 03:17 PM

And your X server is too old (Release Date: 21 December 2005 ?). For stable 7.2, it should be 22 January 2007

It's weird. The git repository I used was git://anongit.freedesktop.org/git/xorg/xserver (with git clone) and it reports that date string (BTW, it is hardcoded as a #define). How can the version be 7.2 with the date being 21 December 2005?

a_villacis

06-11-2007, 03:23 PM

I'm not sure I can help with debugging your problems, but I can tell you that I have the latest ati driver installed on my system, the latest DRM, and the latest DRI driver (all pulled from git within the last week).

What procedure did you use to compile? Did you use the Xorg server from your distro and just replaced the libraries, or did you compile everything from scratch? I had to compile everything from scratch because my distro supplied Xorg is version 7.1 . When I use all released packages, the ati driver works flawlessly (but without any 3-D acceleration). Apparently the git version of the ati driver requires 7.3 or current git of xorg-server . I tried compiling current git of the ati driver with xorg 7.2 (1.2.0) but I had the black-screen symptom. I thought it would dissapear if I used the git version of xorg-server, but no such luck.

Xipeos

06-11-2007, 03:35 PM

What procedure did you use to compile? Did you use the Xorg server from your distro and just replaced the libraries, or did you compile everything from scratch? I had to compile everything from scratch because my distro supplied Xorg is version 7.1 . When I use all released packages, the ati driver works flawlessly (but without any 3-D acceleration). Apparently the git version of the ati driver requires 7.3 or current git of xorg-server . I tried compiling current git of the ati driver with xorg 7.2 (1.2.0) but I had the black-screen symptom. I thought it would dissapear if I used the git version of xorg-server, but no such luck.

The radeon driver does not include DRI, as far as I know. You'll have to compile Mesa3d for that.

As for the X server, I don't know :) I compiled the whole X.org from that git repository about a month ago and got 7.1.99.<something> with a release date of december 2005. Maybe the version from git isn't cleaned up? (but it may be up to date now).

There is an announcement on wiki.x.org:
Development snapshots are currently on hiatus. Most modules now update slowly enough that frequent snapshots aren't needed. The server itself is still quite volatile; snapshots of it will probably resume shortly.
but it's not dated.

Why do you want to compile from git anyway? Is there some specific feature that you want, or do you just want to have the latest and (not so) greatest? Keep in mind that developers may not account for changes in the development version, and you'll end up with "bleeding edge" that breaks things..

adamk

06-11-2007, 04:51 PM

a_villacis

06-11-2007, 06:35 PM

The radeon driver does not include DRI, as far as I know. You'll have to compile Mesa3d for that.

Yes, I know that. I compiled the latest Mesa3d from git along with xorg-server and the ati driver.

Why do you want to compile from git anyway? Is there some specific feature that you want, or do you just want to have the latest and (not so) greatest? Keep in mind that developers may not account for changes in the development version, and you'll end up with "bleeding edge" that breaks things..

The latest stable version of the ati driver disables DRI on purpose:

(II) RADEON(0): Direct rendering broken on XPRESS 200 and 200M

The "specific feature" I want to test is the accelerated OpenGL. I need the git version because there is no stable version of the ati driver that will enable DRI on my machine. But the problem is that I cannot even get around to test a simple glxgears, because of the black screen problem. I know I am playing with the "bleeding edge" in OpenGL support, but the problem I have seems like some stupid mistake I made with either the compile or the xorg.conf file. Or this might be a genuine bug that shows up in my setup (I am suspecting something around MergedFB). I am still trying to find out which one is it.

Just in case, xorg-server 7.2 with stable ati driver (compiled from sources) works correctly on my machine, but with accelerated OpenGL disabled. xorg-server-7.2 with ati from git shows the black screen. xorg-server from git with ati from git also exhibits the black screen.

Xipeos

06-12-2007, 01:40 AM

I assume that you want AIGLX for beryl. You can use fglrx and Xgl (which is probably included in fedora) for the same effect (and probably better performance).

all I get is a black screen. My monitor seems to shut down (the green LED beside the power button turns orange and blinks) and I see nothing on my screen. In addition, the keyboard is unresponsive and therefore Ctrl-Alt-Backspace seems to have no effect.

If the logs you posted are in order, then X crashes without taking the driver with it OR it doesn't restore your display. In any case, X crashes (too soon) so ctrl-alt-backspace won't do you any good. If you're not running xdm or similar, and return to the console, it should still work, even though you're not seeing it (this used to happed a lot with fglrx)