Results 1 to 8 of 8

Thread: P45 motherboard / Intel ICH10R

  1. #1
    Join Date
    Nov 2006
    Posts
    75

    Default P45 motherboard / Intel ICH10R

    Hello all!

    I'm planing to put myself a new computer together and the CPU is most probably going to be a Intel Core2 Duo E8400. I first had a X48 based mobo in mind but now became aware of the new P45 boards. Since its a 65nm chipset it is said to consume less power compared to the X38/X48 based boards (90nm), which I find very interesting. Besides, the P45 are noticeable cheaper than the X48 boards.

    Therefore I'd like to know if somebody here has already some experience with the P45 boards. Are they working with Linux, any known problems? What about the new Intel ICH10R chipset and TPM- is it just the usual (*NIX-user) paranoia or should the topic be considered more serious?

  2. #2

    Default

    I have a few P45 boards sitting on my pile of new stuff to test... Should have some results soon.

  3. #3
    Join Date
    Nov 2006
    Posts
    75

    Thumbs up

    Thanks alot Michael!

  4. #4
    Join Date
    May 2008
    Posts
    13

    Default

    Any news on the Intel chipsets P45 and ICH10R? Should we be expecting reviews of those in the following week? Thanks.

  5. #5
    Join Date
    Aug 2007
    Posts
    6,610

    Default

    I don't think you will see many changes compared to X48 boards. Basically P45 has the same specs just cheaper - without official FSB 1600 support, but that can do any Intel chipset since P965.

  6. #6
    Join Date
    May 2008
    Posts
    13

    Default

    Quote Originally Posted by Kano View Post
    I don't think you will see many changes compared to X48 boards. Basically P45 has the same specs just cheaper - without official FSB 1600 support, but that can do any Intel chipset since P965.
    I was wondering about the chipsets drivers. Will they work just like previous ones?

  7. #7
    Join Date
    Aug 2007
    Posts
    6,610

    Default

    For me dmraid support for onboard raid would be interesting, but that is currently not working correctly. Even with patched dmraid it calcs wrong by at least 1 cylinder (when you configure it with Win first). For standard use the IDE controller should not be differnt - it works ether in IDE legacy emulation mode (needed for cdrom in many cases to install) or via AHCI. Both work via standard drivers. The rest is usally not critical.

  8. #8
    Join Date
    Sep 2006
    Posts
    210

    Default

    Quote Originally Posted by mahuyar View Post
    I was wondering about the chipsets drivers. Will they work just like previous ones?
    Apart from different PCI-IDs, Intel chipsets rarely change their register
    interface, so yes, they should work (especially "old" pieces like ahci, smbus, audio)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •