A few questions about Test Suite
Hi, I'm new here and I have a few doubts about your great suite of benchmarking.
1) Why my proccessor is no detected correcly? Same case with my memory.
Show the results like this:
2) Why the sensors not works properly during bench?
====================================Code:$ ./phoronix-test-suite run compliance-sensors
LM Sensors (Run 1 of 1)
====================================
FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS
################################################## ####
LM Sensors:
(VCore, +3.3V, +5V, +12V, CPU Fan, CPU Temp, Sys Temp)
Final: FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS
################################################## ####
But the daemon sensors works fine.:S
I try $ phoronix-test-suite sensor-options:
But I don't have to use properly.Code:$ ./phoronix-test-suite sensor-options Monitoring these sensors are as easy as running your normal Phoronix Test Suite commands but at the beginning of the command add: MONITOR=<selected sensors> (example: MONITOR=cpu.temp,cpu.voltage phoronix-test-suite benchmark universe). Below are all of the sensors supported by this version of the Phoronix Test Suite. Supported Options: - all - all.temp - all.power - all.voltage - all.freq - all.usage - gpu.temp - cpu.temp - sys.temp - battery.power - cpu.voltage - v3.voltage - v5.voltage - v12.voltage - cpu.freq - gpu.usage
Use Arch Linux i686 x32 - E7200 @3,6 - 1024 mb Kingston DDR2 800 mhz 4-4-4-12 - HD Seagate 320 gigas S-ATA II - GeForce 7300GT - GA-P35-DS3P
Thanxs in advance.
Can you paste the output of your /proc/cpuinfo ?Originally Posted by mojado
1) Why my proccessor is no detected correcly? Same case with my memory.
Show the results like this:
Can you then paste the output when running the sensors command?
Arch Linux always seems to be problematic with PHP / Phoronix Test Suite.
Thanxs Michael!
Code:$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping : 6 cpu MHz : 3800.059 cache size : 3072 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm bogomips : 7606.61 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping : 6 cpu MHz : 3800.059 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm bogomips : 7603.65 clflush size : 64
Code:$ sudo /etc/rc.d/sensors start $ sensors it8718-isa-0290 Adapter: ISA adapter in0: +1.25 V (min = +0.00 V, max = +4.08 V) in1: +1.94 V (min = +0.00 V, max = +4.08 V) in2: +3.36 V (min = +0.00 V, max = +4.08 V) in3: +2.99 V (min = +0.00 V, max = +4.08 V) in4: +0.11 V (min = +0.00 V, max = +4.08 V) in5: +0.06 V (min = +0.00 V, max = +4.08 V) in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM in7: +3.10 V (min = +0.00 V, max = +4.08 V) in8: +3.09 V fan1: 2547 RPM (min = 0 RPM) fan2: 1271 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = transistor temp2: +28.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = transistor cpu0_vid: +2.800 V coretemp-isa-0000 Adapter: ISA adapter Core 0: +31.0°C (high = +76.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +32.0°C (high = +76.0°C, crit = +100.0°C)Thanxs for your help and greetings.(Y)Code:$ ./phoronix-test-suite run compliance-sensors Would you like to save these test results (Y/n)? Y Enter a name to save these results: sens Enter a unique identifier for distinguishing this series of tests: 15 ==================================== LM Sensors (Run 1 of 1) ==================================== FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS ###################################################### LM Sensors: (VCore, +3.3V, +5V, +12V, CPU Fan, CPU Temp, Sys Temp) Final: FAIL,FAIL,FAIL,FAIL,PASS,PASS,PASS ###################################################### The PHP GD extension must be loaded in order for the graphs to display! Results Saved To: /home/jack/.phoronix-test-suite/test-results/sens/composite.xml Do you want to view the results in your web browser (y/N)?
First i like to thank you for this great piece of software !
While testing around, some things went wrong on my system.
1. phoronix-test-suite benchmark compliance-ogl
the output was:
obviously the binaries were missing / not compiled on installation, so i compiled it by hand and it works like a charme now.Code:==================================== GLEW (Run 1 of 1) ==================================== ./compliance-ogl: 2: ./glew/bin/glewinfo: not found ######################################################## GLEW: (GL 1.1, GL 1.2, GL 1.3, GL 1.4, GL 1.5, GL 2.0, GL 2.1) Final: FAIL,FAIL,FAIL,FAIL,FAIL,FAIL,FAIL
Code:==================================== GLEW (Run 1 of 1) ==================================== GL_VERSION_1_1: OK GL_VERSION_1_2: OK GL_VERSION_1_3: OK GL_VERSION_1_4: OK GL_VERSION_1_5: OK GL_VERSION_2_0: OK GL_VERSION_2_1: OK ######################################################## GLEW: (GL 1.1, GL 1.2, GL 1.3, GL 1.4, GL 1.5, GL 2.0, GL 2.1) Final: PASS,PASS,PASS,PASS,PASS,PASS,PASS ########################################################
2. phoronix-test-suite benchmark glmark
The version 0.5.2 provided by PTS 1.02 segfaults on my system.
I used 0.5.2.1 from https://sourceforge.net/project/show...roup_id=224203 which works. But i have to enter the resolution by hand to start glmark like this:
3. My processor is not detected correctly..Code:==================================== GLMark (Run 1 of 1) ==================================== 800 600 16 0 Vertex buffer object FPS: 1204 #################################### GLMark: 800 x 600 - Vertex Buffer Object 1204 Average FPS Average: 1204.00 Average FPS ####################################
it saysHere is my output of /proc/cpuinfo:Processor: Unknown (Total Cores: 1)
My systemspecs are:Code:$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 2200+ stepping : 0 cpu MHz : 1804.233 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts bogomips : 3611.77 clflush size : 32
OS: Xubuntu 8.04
Ram: 512MB
VGA: Ati Radeon 9800pro (latest fglrx)
CPU: Athlon XP 2200+
Keep on your great work!
Posting Permissions
Reply With Quote