Results 1 to 4 of 4

Thread: catalyst 9.2 broken amdcccle

  1. #1
    Join Date
    Jul 2008
    Posts
    1,731

    Default catalyst 9.2 broken amdcccle

    So I nstalled 9.2.
    I removed everything from 9.1 including /etc/ati

    the driver loads fine, X starts fine everything is great, until I start amdcccle

    Now X will blank the screen every odd second, eating 99% cpu, amdcccle sleeps. The first time I quit X after several minutes, last time I quit it after rougly one minute of flickering.
    Meanwhile Xorg.0.log fills up with thousands of this lines:

    (II) fglrx(0): EDID vendor "ACR", prod id 44404
    (II) fglrx(0): Using hsync ranges from config file
    (II) fglrx(0): Using vrefresh ranges from config file
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) fglrx(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) fglrx(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) fglrx(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
    (II) fglrx(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
    (II) fglrx(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
    (II) fglrx(0): Modeline "1440x900"x75.0 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync (70.5 kHz)
    (II) fglrx(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
    (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
    (II) fglrx(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz)

    the first time when I killed X I was at 10 000 line long Xorg.0.log

    so any idea what goes wrong?

  2. #2
    Join Date
    Feb 2009
    Posts
    23

    Default

    This sound similar to my issues with fglrx. You can read it up here http://www.phoronix.com/forums/showthread.php?t=15562

    Unfortunatelly nobody answered yet

  3. #3
    Join Date
    Feb 2009
    Location
    prague
    Posts
    7

    Default RE: catalyst 9.2 broken amdcccle

    Same problem here!
    Everything was ok (Gentoo ~amd64) until I've installed some TTF fonts.
    After installation of the fonts the CPU went 100% and the log filled with "DDC gathered Modelines"...
    A bug in the driver?

    Log of my X session: http://pastebin.com/mca2d5e1

  4. #4
    Join Date
    Jul 2008
    Posts
    1,731

    Default

    hm, I had some fonts and X related updates the last days. I tried amdcccle today and this happened:
    it takes long to start.
    Xorg is spamed with modeline detections
    but: no blinking.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •