Dual Monitor problem on HD3450/RS780/RS690

[Blue Beard]

Since radeonhd 1.2.4 (including the upgrade 1.2.4-1) came to jaunty Alpha 4 the outputs of my HD3450 became locked together with any xrandr command. See example below. I have two motherboards one with RS690 and the other with RS780. I switched between radeon and radeonhd. Both motherboards and drivers produce similar results.

Currently my xorg.cong is stipped with only a virtual subsection being added to allow the monitor to be moved out of the default 1360x1360 area.

What direction should I concentrate my research effort to solve this problem? a) expanded xorg.conf, b) use extended R6xx code, c) x.org git driver.

Suggestions?

mur@ubuntu1:~$ xrandr
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 2704 x 1050
VGA_1 connected 1152x864+0+0 0mm x 0mm
1152x864 60.0*+
1360x768 59.8
1024x768 60.0
800x600 60.3
640x480 59.9
DVI-D_1 disconnected
DVI-I_2/digital disconnected
DVI-I_2/analog connected 1152x864+0+0 0mm x 0mm
1152x864 60.0*+
1360x768 59.8
1024x768 60.0
800x600 60.3
640x480 59.9
mur@ubuntu1:~$ xrandr --output DVI-I_2/analog --mode 1024x768
mur@ubuntu1:~$ xrandr
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 2704 x 1050
VGA_1 connected 1024x768+0+0 0mm x 0mm
1152x864 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3
640x480 59.9
DVI-D_1 disconnected
DVI-I_2/digital disconnected
DVI-I_2/analog connected 1024x768+0+0 0mm x 0mm
1152x864 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3
640x480 59.9

[bridgman]

I have heard a few people mention similar problems recently.

Since radeon and radeonhd have fairly different modesetting code if both of them suddenly broke then it sounds more like xserver than driver.

[Blue Beard]

The major change between working and not working may be related to OPTION "HPD" "off" which is now depeciated.

X-server went from rc1 to rc2
kernel from 2.6.28-4 to 2.6.28-8
radeonhd from 1.2.4 to 1.2.4-1

The last time both monitors worked:
2.6.28-4-generic #11-Ubuntu SMP Fri Jan 16 21:50:52 UTC 2009 x86_64
xorg-server 2:1.5.99.901-0ubuntu1 (buildd@crested.buildd)
(II) RADEONHD: version 1.2.4, built from dist of git branch master, commit 4e897263

(--) RADEONHD(0): Detected an RV620 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfdde0000 to 0x7f17389e1000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1787 SubsystemID: 0x2252
IOBaseAddress: 0xee00
Filename: Test.bin
BIOS Bootup Message: RV620 GDDR2_64BIT 81129OAH.SEK

Section "Device"
Identifier "HD3450"
Driver "radeonhd"
BusID "PCI:2:0:0"
Option "HPD" "off"
EndSection

[Blue Beard]

I did a fresh install of jaunty alpha 5 and went thru the python problems
x-server 1.5.99.902-7
libxrandr 1.2.99.4-2

The radeon driver (6.11.0-2) now ignores my second monitor.

The radeonhd driver (1.2.4-2) not only fixes the problem, the sharpness of my LCD monitor has improved significantly.

The screens are now swapped (i.e. right-of produces left-of). In the past this was fixed by OPTION "HPD" "off"

[agd5f]

Please file bugs (https://bugs.freedesktop.org) and attach your xorg logs and configs.

[Blue Beard]

See Bug report 20407 for more details.

x-server 1.6.0
libxrandr 1.2.99.4-2
radeonhd 1.2.4-2

The radeon driver (6.11.0-5) still ignores my second monitor.

Using radeonhd driver and OPTION "HPD" "off", DVI-D_1 now appears.

mur@ubuntu2:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2704 x 1050
VGA_1 connected 1280x1024+0+0 260mm x 195mm
1280x1024 60.0*+
1152x864 75.0
1024x768 75.1 70.1 60.0 43.5
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 87.8 70.1
DVI-D_1 connected 1280x1024+0+0 260mm x 195mm
1280x1024 60.0*+
1152x864 75.0
1024x768 75.1 70.1 60.0 43.5
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 87.8 70.1
DVI-I_2/digital disconnected
DVI-I_2/analog connected 1152x864+0+0 0mm x 0mm
1360x768 59.8
1152x864 60.0*
1024x768 60.0
800x600 60.3
640x480 59.9

[Blue Beard]

x-server 2:1.6.0-0ubuntu1
libxrandr 2:1.2.99.4-2
radeonhd 1.2.4+git2009031

I get the best results with

Section "Device"
Identifier "HD3450"
Driver "radeonhd"
Option "monitor-VGA_1" "Daytek LCD TV"
Option "monitor-DVI-I_2/analog" "Daytek 17 inch CRT"
Option "RROutputOrder" "Daytek LCD TV"
Option "DRI"
EndSection

The Option "HPD" "off" is no longer required.

My server layout section seems to be ignored.