Results 1 to 6 of 6

Thread: i want only a TV screen

  1. #1
    Join Date
    Feb 2009
    Posts
    52

    Default i want merely a TV screen wich works

    Hello,


    KDE 4.2 / radeon 4670 + a TV screen (sony 40w4000)/ opensuse 11.1.

    At the beginning, i used xinerama and a 22 inches samsung LCD with my TV. Everything was fine but now i want to use only my TV.
    When i disconnect my samsung lcd, after a restart, i can't go under KDE (console mode). "aticonfig --initial" and "startx" give me a black screen and a hard reset, "sax2 -m -r 0 =fglrx" gives me a black screen and this message from my television "the signal is not supported".

    Actually i have 2 screen in my living room , wich is not usefull.

    What i understood was that "aticonfig --initial" uses the former xorg.conf to create a new one. This xorg.conf, in my situation, contains mostly the information about my 22 inches samsung LCD and almost nothing about my sony TV, well nothing as far as i see.

    Do you have an idea to create automatically a new xorg.conf for my TV screen.

    Bibi

    ps : i'm not at home so i cant post my xorg.conf...
    Last edited by bibi; 03-31-2009 at 04:57 AM.

  2. #2
    Join Date
    Oct 2007
    Location
    Toronto-ish
    Posts
    7,516

    Default

    It may be that the TV is not providing EDID information, so the config utilities won't know about it. The xorg log might give some clues.

  3. #3
    Join Date
    Feb 2009
    Posts
    52

    Default

    Here is my log :
    Code:
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout[all]"
    (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    (**) |   |-->Device "aticonfig-Device[0]-0"
    (**) Option "ZapWarning" "on"
    (**) Option "Xinerama" "off"
    (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (--) PCI:*(0@4:0:0) unknown vendor (0x1002) unknown chipset (0x9490) rev 0, Mem @ 0xd0000000/0, 0xcffe0000/0, I/O @ 0x0000e000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/updates//extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/updates//extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 7.4.0, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX disabled
    (WW) fglrx: Force AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    
    (II) Loading /usr/lib/xorg/modules//extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension RECORD
    (II) LoadModule: "fglrx"
    
    (II) Loading /usr/lib/xorg/modules//drivers/fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    	compiled for 1.4.99.906, module version = 8.59.2
    	Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Primary Device is: PCI 04@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.59.2
    (II) ATI Proprietary Linux Driver Release Identifier: 8.593                                
    (II) ATI Proprietary Linux Driver Build Date: Mar 12 2009 23:38:54
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 4.1
    (II) AMD ASIC control file status: R2 S1 B330 N330 T329
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@4:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x9490) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@4:0:1) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) fglrx(0): pEnt->device->identifier=0x8223140
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): PCI bus 4 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x06419064
    (**) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    	compiled for 1.4.99.906, module version = 8.59.2
    (--) fglrx(0): Chipset: "ATI Radeon HD 4670" (Chipset = 0x9490)
    (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe880)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xcffe0000
    (--) fglrx(0): I/O port at 0x0000e000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 11.11
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
    (II) fglrx(0): VESA VBE OEM Product: RV730
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:4:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:4:0:0
    (II) fglrx(0): Using adapter: 4:0.0.
    (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    Last edited by bibi; 04-01-2009 at 04:05 AM.

  4. #4
    Join Date
    Feb 2009
    Posts
    52

    Default

    Code:
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000008, disabled=0x00000000
    (II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: SNY  Model: 7001  Serial#: 16843009
    (II) fglrx(0): Year: 2008  Week: 1
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 160  vert.: 90
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): No DPMS capabilities specified
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.595
    (II) fglrx(0): blueX: 0.155 blueY: 0.070   whiteX: 0.283 whiteY: 0.298
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 148.5 MHz   Image Size:  1600 x 900 mm
    (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
    (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 74.2 MHz   Image Size:  1600 x 900 mm
    (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
    (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
    (II) fglrx(0): Monitor name: SONY TV
    (II) fglrx(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 150 MHz
    (II) fglrx(0): Number of EDID sections to follow: 1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 	00ffffffffffff004dd9017001010101
    (II) fglrx(0): 	0112010380a05a780a0dc9a057479827
    (II) fglrx(0): 	12484c21080081800101010101010101
    (II) fglrx(0): 	010101010101023a801871382d40582c
    (II) fglrx(0): 	450040846300001e011d007251d01e20
    (II) fglrx(0): 	6e28550040846300001e000000fc0053
    (II) fglrx(0): 	4f4e592054560a2020202020000000fd
    (II) fglrx(0): 	00303e0e460f000a202020202020013e
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    (II) fglrx(0): Output DFP3 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) fglrx(0): Output CRT2 has no monitor section
    (II) fglrx(0): Output TV has no monitor section
    (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
    (II) fglrx(0): EDID vendor "SNY", prod id 28673
    (II) fglrx(0): Using EDID range info for horizontal sync
    (II) fglrx(0): Using EDID range info for vertical refresh
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
    (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) fglrx(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) fglrx(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
    (II) fglrx(0): Output DFP1 connected
    (II) fglrx(0): Output DFP3 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Output CRT2 disconnected
    (II) fglrx(0): Output TV disconnected
    (II) fglrx(0): Output COMPONENT_VIDEO disconnected
    (II) fglrx(0): Using exact sizes for initial modes
    (II) fglrx(0): Output DFP1 using initial mode 1920x1080
    (**) fglrx(0): Display dimensions: (1600, 900) mm
    (**) fglrx(0): DPI set to (30, 30)
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0):  PseudoColor visuals disabled
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.2.1
    	ABI class: X.Org Video Driver, version 4.1
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (II) fglrx(0): [pcie] 1035776 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 219.
    (II) fglrx(0): Finished Initialize PPLIB!
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (II) fglrx(0): detected X.org 7.4.2.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID PCI:4:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports PCI:4:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:4:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7b97000
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0):     Name: fglrx
    (II) fglrx(0):     Version: 8.59.2
    (II) fglrx(0):     Date: Mar 13 2009
    (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.27.7-9-default
    (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    (II) fglrx(0):     Build-Kernel __SMP__:            yes
    (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    (II) fglrx(0): [drm] register handle = 0x00004000
    (II) fglrx(0): Adjust primary surface width to 0x780 for rotation!
    (II) fglrx(0): Adjust desktop virtualY to 0x780! for rotation
    (II) fglrx(0): Display width adjusted to to 2048 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01140000
    (II) fglrx(0): FBMM initialized for area (0,0)-(2048,2208)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(2048,1920) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 2048 x 288
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Initialized in-driver Xinerama extension
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    	compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 94
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    	Screen to screen bit blits
    	Solid filled rectangles
    	Solid Horizontal and Vertical Lines
    	Driver provided ScreenToScreenBitBlt replacement
    	Driver provided FillSolidRects replacement
    (II) fglrx(0): GLESX is enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    	compiled for 1.4.99.906, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available 
    (II) fglrx(0): Enable composite support successfully
    (WW) fglrx(0): Option "VendorName" is not used
    (WW) fglrx(0): Option "ModelName" is not used
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (==) fglrx(0): Using software cursor
    (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (--) RandR disabled

  5. #5
    Join Date
    Feb 2009
    Posts
    52

    Default

    Code:
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: Searching for BusID PCI:4:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: drmOpenMinor returns 13
    drmOpenByBusid: drmGetBusid reports PCI:4:0:0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Restoring recent mode: 1920x1080@60Hz
    
    Backtrace:
    0: /usr/bin/X(xf86SigHandler+0x79) [0x80c0c19]
    1: [0xffffe400]
    2: /usr/bin/X(dixLookupPrivate+0x27) [0x8071687]
    3: /usr/bin/X(xf86SetViewport+0x34) [0x80bcfd4]
    4: /usr/bin/X(ProcessInputEvents+0x6f) [0x80c160f]
    5: /usr/bin/X(UpdateCurrentTime+0x4b) [0x808b6ab]
    6: /usr/bin/X(RRTellChanged+0x4d) [0x816776d]
    7: /usr/bin/X(xf86SetSingleMode+0x15b) [0x80e9f6b]
    8: /usr/lib/xorg/modules//drivers/fglrx_drv.so(atiddxSwitchMode+0x7d) [0xb76c658d]
    9: /usr/bin/X [0x80f344a]
    10: /usr/bin/X [0x80c8d5b]
    11: /usr/bin/X(xf86SwitchMode+0xec) [0x80bd0ec]
    12: /usr/lib/xorg/modules//drivers/fglrx_drv.so [0xb76d0d4b]
    13: /usr/lib/xorg/modules//drivers/fglrx_drv.so [0xb76cf7ac]
    14: /usr/bin/X [0x80e90f0]
    15: /usr/bin/X(main+0x2e9) [0x8070bb9]
    16: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7be4705]
    17: /usr/bin/X [0x8070131]
    
    Fatal server error:
    Caught signal 11.  Server aborting
    
    (II) AIGLX: Suspending AIGLX clients for VT switch
    And here is my xorg.xonf

    Code:
    Section "ServerLayout"
    	Identifier     "Layout[all]"
    	Screen      0  "aticonfig-Screen[0]-0" 0 0
    	InputDevice    "Keyboard[0]" "CoreKeyboard"
    	InputDevice    "Mouse[1]" "CorePointer"
    	InputDevice    "Mouse[3]" "SendCoreEvents"
    	Option	    "Clone" "off"
    	Option	    "Xinerama" "off"
    EndSection
    Section "Module"
    	Load  "dri"
    	Load  "dbe"
    	Load  "freetype"
    	Load  "extmod"
    	Load  "glx"
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[0]-0"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[0]-0"
    	Driver      "fglrx"
    	BusID       "PCI:4:0:0"
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[0]-0"
    	Device     "aticonfig-Device[0]-0"
    	Monitor    "aticonfig-Monitor[0]-0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    
    Section "DRI"
    	Group        "video"
    	Mode         0660
    EndSection
    What is really strange is that when i start my computer with the LDC samsung plugged but off and my TV on, it works in 1680*1050 but when i start my computer with just my TV plugged... .
    And my Tv is plugged through an adaptator dmi->hdmi.

    Bibi
    Last edited by bibi; 04-01-2009 at 07:26 AM.

  6. #6
    Join Date
    Feb 2009
    Posts
    52

    Default

    I continue alone :

    It works with this xorg.conf :

    Section "ServerLayout"
    Identifier "Layout[all]"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Keyboard[0]" "CoreKeyboard"
    InputDevice "Mouse[1]" "CorePointer"
    InputDevice "Mouse[3]" "SendCoreEvents"
    Option "Clone" "off"
    Option "Xinerama" "off"
    EndSection

    Section "Module"
    Load "dri"
    Load "dbe"
    Load "freetype"
    Load "extmod"
    Load "glx"
    EndSection

    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    DisplaySize 487 303
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:4:0:0"
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    I had to add "DisplaySize 487 303" cause alla the police in KDE4 were unreadable (too litle).

    Now i have one last issue : if i enable 60Hz in amdccle, which is at 24Hz, after a reboot i cant go under KDE (hard reboot), and i have to delete /etc/ati/ and reinstall the driver.

    By the way i still have the video tearing problem (with xv and gl). Do you think that it could come from the refresh?

    Bibi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •