I installed ati drivers 9.5 in my gentoo to be able to use my new HD4770. But when I run xorg -configure to reconfig X, I get an error. This is the log:


Code:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-gentoo-r7 x86_64 
Current Operating System: Linux serenity 2.6.25-gentoo-r7 #1 PREEMPT Sat Oct 4 05:02:49 CDT 2008 x86_64
Build Date: 29 March 2009  08:26:34PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 19 09:16:26 2009
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x3200
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@4:0:0) ATI Technologies Inc unknown chipset (0x94b3) rev 0, Mem @ 0xd0000000/268435456, 0xcffe0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
List of video drivers:
	fglrx
	radeon
	ati
(II) LoadModule: "fglrx"

(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.61.2
	Module class: X.Org Video Driver
(II) LoadModule: "radeon"

(II) Loading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 6.12.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "ati"

(II) Loading /usr/lib64/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 6.12.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Primary Device is: PCI 04@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.61.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.612                                
(II) ATI Proprietary Linux Driver Build Date: Apr 28 2009 21:45:06
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(II) AMD ASIC control file status: R312 S1 B129 N128 T128
(WW) fglrx: No matching Device section for instance (BusID PCI:0@4:0:1) found
(**) ChipID override: 0x94B3
(**) Chipset Supported AMD Graphics Processor (0x94B3) found

Backtrace:
0: Xorg(xorg_backtrace+0x26) [0x4d7f9e]
1: Xorg(xf86SigHandler+0x39) [0x470171]
2: /lib/libc.so.6 [0x7f1f867ce430]
3: /usr/lib64/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x34b) [0x7f1f8622f26b]
4: Xorg(xf86CallDriverProbe+0x1cc) [0x4606a3]
5: Xorg(DoConfigure+0x1bd) [0x46ba0f]
6: Xorg(InitOutput+0x652) [0x460ef5]
7: Xorg(main+0x24e) [0x4304ca]
8: /lib/libc.so.6(__libc_start_main+0xf4) [0x7f1f867bbb74]
9: Xorg [0x42fb09]

Fatal server error:
Caught signal 11.  Server aborting
Any idea about wahts happening here? Perhaps the manufacturer (HIS) touched something?