Page 38 of 41 FirstFirst ... 283637383940 ... LastLast
Results 371 to 380 of 406

Thread: ATI R600/700 OSS 3D Driver Reaches Gears Milestone

  1. #371
    Join Date
    Oct 2007
    Posts
    1,267

    Default

    FarJumper, I've been working on a guide for Ubuntu. It's a bit messy, but maybe it will help you: http://ubuntu.pastebin.com/m5751c068

  2. #372
    Join Date
    Sep 2009
    Posts
    2

    Default

    Quote Originally Posted by FarJumper View Post
    It looks that libgl1-mesa-dri package (libgl1-mesa-dri 7.6.0+git20090902.dc9de806-0ubuntu0tormod) doesn't have r600 module. Only r200 and r300 are exist.
    In a comment of bug whitch affects me:
    Quote Originally Posted by Jeffrey Baker
    The version of libgl1-mesa-dri in xorg-edgers doesn't provide r600_dri.so

  3. #373
    Join Date
    Oct 2007
    Posts
    1,267

    Default

    It probably doesn't include it because you need agd5f's DRM for it to work properly.

  4. #374
    Join Date
    Jan 2009
    Posts
    10

    Default

    DanL, thanks a lot! The Guide seems to be very useful. I'll try in later.

    BTW, `sudo update-initramfs -u` handles the problem of blacklisted drivers you mentioned at the line 95.

  5. #375
    Join Date
    Jan 2008
    Posts
    153

    Default

    I have a quick question for the AMD team : what level of support is brought by the incoming 2.6.31 kernel for r600 and r700?
    I seem to remember that KMS was for r500 and lower, but there seem to be some code for r600 in the I have a quick question for the AMD team : what level of support is brought by the incoming 2.6.31 kernel for r600 and r700?
    I seem to remember that KMS was for r500 and lower, but there seems to be some code for r600 in the /drivers/gpu/drm/radeon dir in the kernel tree.
    Is that supposed to be enough to get 3D with r600-r700 devices or does one still need to use the specific r600-r700 kernel modules branch to make it work?

  6. #376
    Join Date
    Aug 2008
    Location
    Finland
    Posts
    1,578

    Default

    I'm not part of any team but 2.6.31 will only give you 2D accel on r600/r700. For the rest you're looking for 2.6.32 or greater or agd5f's DRM branch.

  7. #377
    Join Date
    Feb 2009
    Posts
    52

    Default

    My dmesg

    Code:
     
    [    7.179317] [drm] Initialized drm 1.1.0 20060810
    [    7.250930] radeon 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    7.250986] radeon 0000:04:00.0: setting latency timer to 64
    [    7.251146] [drm] Initialized radeon 1.29.0 20080613 on minor 0
    [   21.784953] [drm] Setting GART location based on new memory map
    [   21.800115] [drm] Loading RV730/RV740 PFP Microcode
    [   21.800143] [drm] Loading RV730/RV740 CP Microcode
    [   21.815206] [drm] Resetting GPU
    [   21.815261] [drm] writeback test succeeded in 1 usecs
    My Xorg.log

    Code:
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules//extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading /opt/xorg/lib/xorg/modules//drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 6.12.2
            Module class: X.Org Video Driver
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): TOTO SAYS 00000000cffe0000
    (II) RADEON(0): MMIO registers at 0x00000000cffe0000: size 64KB
    (II) RADEON(0): PCI bus 4 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AccelMethod" "exa"
    (**) RADEON(0): Option "DRI" "on"
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:04:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:04:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    My xorg.conf

    Code:
    Section "Device"
      BoardName    "ATI Radeon Graphics Processor (RV730 9490)"
      Driver       "radeon"
      Identifier   "Device[0]"
      Option       "monitor-DVI-I_2/digital" "Monitor[0]"
      VendorName   "ATI"
      Option      "AccelMethod" "exa" # default shadowfb
      Option      "DRI" "on"
    Option "BusType" "PCIE"
    EndSection
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection

  8. #378
    Join Date
    Oct 2008
    Location
    Poland
    Posts
    182

    Default

    Quote Originally Posted by rvdboom View Post
    I have a quick question for the AMD team : what level of support is brought by the incoming 2.6.31 kernel for r600 and r700?
    I seem to remember that KMS was for r500 and lower, but there seem to be some code for r600 in the I have a quick question for the AMD team : what level of support is brought by the incoming 2.6.31 kernel for r600 and r700?
    I seem to remember that KMS was for r500 and lower, but there seems to be some code for r600 in the /drivers/gpu/drm/radeon dir in the kernel tree.
    Is that supposed to be enough to get 3D with r600-r700 devices or does one still need to use the specific r600-r700 kernel modules branch to make it work?
    Do you mind if I answer? I'm not part of AMD team.

    .31 gives you 2D for R6xx/R7xx and somehow experimental (staging) KMS for r1xx-r5xx. New features usually can be pushed in merging window only, so don't expect new features to be added between rc1 and final.

    On the other hand we will see merge window for .32 soon. So expect many new features hitting mainline and slowly going to .32 stable release.

  9. #379
    Join Date
    Jun 2009
    Posts
    2,927

    Default

    With the latest git, OpenGL compositing in KDE works longer than before, but when I tried enabling the desktop cube, the system hung, and I could only move the mouse around (sluggishly).

  10. #380
    Join Date
    Oct 2007
    Location
    Toronto-ish
    Posts
    7,402

    Default

    2.6.30 added EXA and Xv support for 6xx/7xx

    2.6.31 added KMS/GEM/TTM support for r1xx-r5xx (staging only)

    2.6.32 will hopefully add KMS/GEM/TTM support for 6xx/7xx (staging only) and 3D support for 6xx/7xx (normal, not staging). I think the intent is for KMS/GEM/TTM on r1xx-r5xx to move out of staging but I'm not sure about that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •