My machine has suddenly become very noisy - what could the problem be?
My main desktop machine has suddenly become very noisy - any user activity is triggering a barrage of "pops" out of the speakers. The more intensive the use, the more pops I hear. Even scrolling the browser window with the mouse results in noise, so you can imagine how impractical playing DVDs has become. I know the speakers are OK because I get the same results with a pair of headphones plugged into the sound card's "Analog Out" jack socket instead.
I've looked inside the PC's case and can't see any obvious problem. Can anyone suggest what might be going wrong, please? The sound card is an Audigy 2, and I am running a 188.8.131.52 kernel, just in case this might be a driver problem rather than a hardware problem.
Thanks for any ideas,
- My sound card doesn't share an IRQ with anything else.
- Audio-only applications don't seem to have a problem. (Not CPU-intensive enough? No video update?)
- I am running Fedora 11, which puts PulseAudio between me and any audio.
- Fedora 11 plays havok with my mixer settings. Could some combination of settings be creating interference on one of the output channels?
Last edited by chrisr; 10-26-2009 at 05:02 PM.
I would think it's a software issue or a loose audio jack on the soundcard.
Loose S/PDIF cable?
I have currently resolved the problem by replacing the S/PDIF cable connecting my CD-RW drive to my Audigy2 card with an analogue one. So either the S/PDIF cable was inadequately shielded against electronic noise within the PC case, or the S/PDIF connector on my soundcard was dodgy. Fortunately, the Audigy2 has two analogue connectors.
Originally Posted by NullHead
I'll try and find a better S/PDIF cable to settle the matter completely.
You really shouldn't have to use any spdif or analog cable from your cd-rw to your soundcard. digital audio should passthru crystal clear through the ide bus. If your using the analogue cable from your cd drive then you are letting it's DAC do all the work (and they are usually really piss poor dacs) and your sound card is really doing nothing but passing the audio signal along to it's outputs. Get rid of the cables and check your gains. Sounds like it's picking up interference through a analog in (mic/line in/cdrom) and see if muting those improve your situation.
Originally Posted by chrisr
But if that's the case...
Where does the digital audio "go", if it's coming off the IDE bus? How would I end up hearing it through the analogue speakers connected to my soundcard?
Originally Posted by deanjo
There's a DVD-ROM drive connected to the IDE bus, as well as that CD-RW drive. Does the DVD drive need to be cabled to the soundcard so that I can watch DVDs too?
Digital data is read from the CD drive by the CPU, and sent to the D/A converters on your sound chip/card. The output of the D/A converters goes to the speakers.
This used to be a massive task for the poor CPU but CPUs have become a lot faster since then and audio data rates haven't really gone up.
I'm a little out of my depth here, but i think what your saying is
you'll get less system noise if you remove the analog cable from CDrom
to soundcard. Correct ?
And what software do we use to play CD's ? Xmms, CDPlay and Grip (playback only)
don't know about the presence/absence of this cable, and won't function properly.
This sounds like a speaker shielding problem rather than a PC hardware problem. It's possible that some wires have gotten crossed that are producing the exact electronmagnetic frequency that is disturbing your speakers!
At least in XMMS you need to go to the cd plugin options and tick the "digital" checkbox.
I ruled out the speakers by plugging a pair of headphones in instead
I heard the same noise through the headphones as I did through the speakers. Hence I knew the noise was from the soundcard itself.
Originally Posted by greentweak
Removing the S/PDIF cable between the CD-RW drive and the soundcard has resolved the problem.