Results 1 to 10 of 10

Thread: Radeon KMS, kernel 2.6.33-rc1 /// blue horizontal lines flashes all over the screen.

Threaded View

  1. #1
    Join Date
    Nov 2009
    Posts
    14

    Default Radeon KMS, kernel 2.6.33-rc1 /// blue horizontal lines flashes all over the screen.

    Hello again,

    many thanks to the people developing opesource radeon, mesa, drm and etc.

    Everything works nice for me with 2.6.32, mesa, drm and ati from git.

    I have tried the new 2.6.33-rc1 and downloaded separately the firmware R600_rlc.bin. But when it is initialized, I have thin blue lines (abt 5-10 mm long) all over the screen. Both in console and in X. Actually everything works nice, but this flashing lines... Can anyone make any suggestions? Thank you in advance.

    Here is my dmesg part for drm:
    Code:
    [drm] Initialized drm 1.1.0 20060810
    [drm] radeon defaulting to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    radeon 0000:01:00.0: setting latency timer to 64
    [drm] radeon: Initializing kernel modesetting.
    [drm] register mmio base: 0x88020000
    [drm] register mmio size: 65536
    ATOM BIOS: SonyM750
    [drm] Clocks initialized !
    [drm] Detected VRAM RAM=128M, BAR=128M
    [drm] RAM width 64bits DDR
    [TTM] Zone  kernel: Available graphics memory: 1027616 kiB.
    [drm] radeon: 128M of VRAM memory ready
    [drm] radeon: 512M of GTT memory ready.
    [drm] Loading RV620 CP Microcode
    platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
    platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin
    [drm] GART: num cpu pages 131072, num gpu pages 131072
    [drm] ring test succeeded in 0 usecs
    [drm] radeon: ib pool ready.
    [drm] ib test succeeded in 0 usecs
    [drm] Radeon Display Connectors
    [drm] Connector 0:
    [drm]   VGA
    [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [drm]   Encoders:
    [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [drm] Connector 1:
    [drm]   LVDS
    [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [drm]   Encoders:
    [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
    [drm] Connector 2:
    [drm]   DVI-D
    [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
    [drm]   Encoders:
    [drm]     DFP2: INTERNAL_UNIPHY
    [drm] fb mappable at 0x80141000
    [drm] vram apper at 0x80000000
    [drm] size 4096000
    [drm] fb depth is 24
    [drm]    pitch is 5120
    executing set pll
    executing set crtc timing
    [drm] LVDS-11: set mode 1280x800 18
    Console: switching to colour frame buffer device 160x50
    fb0: radeondrmfb frame buffer device
    registered panic notifier
    [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
    Last edited by dolphin77; 12-18-2009 at 09:14 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •