Results 1 to 3 of 3

Thread: intel GMA + xrandr + 720p = black vertical bar

  1. #1
    Join Date
    Feb 2010
    Posts
    1

    Default intel GMA + xrandr + 720p = black vertical bar

    Hello,

    I bought an old dell computer that contains an intel gma 950 onboard graphics card. I hooked up my computer to an LG 52 inch TV that supports 1080p.

    My problem starts because the TV says it only supports up to 1360x768. This is not true, because 1360x768 looks terrible and 1920x1080 (using my HP laptop) looks cristal clear and great. So the TV is not reporting correctly, or the graphics card is not reading the values right.

    Either way, I used xrandr, following this guide:

    http://www.ubuntugeek.com/how-change...html#more-3469

    The problem is that if I force 1080p, all of the pixels are compressed inside a rectangular area more or less on the center of the TV. It looks terrible. So I tried 720p, and it almost works, but this time the image is "dislocated" slightly to the left: about 300 pixels to the left. This means that 300 pixels are outside the frame of the TV and there is a black bar on the right side.

    Here is a screeshot detailing the problem I have at 720p. On the right is the black bar. The area on the left is outside the screen and cannot be seen normally.



    I hope you can point me in the right direction. Thank you in advance.

  2. #2
    Join Date
    Oct 2008
    Location
    Sweden
    Posts
    983

    Default

    Try asking on the Xorg or Intel-gfx mailing lists. They're usually very helpful when it comes to problems of this kind:

    http://lists.freedesktop.org/mailman/listinfo/xorg
    http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  3. #3
    Join Date
    Sep 2008
    Posts
    123

    Default

    This sounds exactly like my problems using HDMI to connect to my 1080 TV.

    I tried forcing 1080 with different modelines (50Hz, 55Hz, 60Hz) over both VGA and HDMI, and at some setup VGA was working perfectly but HDMI was resized and had a large offset.
    Changing the frequency the black offset changed alot (from left side to right) but no good.

    I haven't had time to dig into the details (and i was waiting for debian to update the drivers before i started complaining), but if you do send off an email or report a bug, please put a link in this thread!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •