Ubuntu 10.04 + fglrx = seg fault

**sandain** · 04-02-2010, 03:07 PM

On a fresh install of Ubuntu 10.04 beta1 with fglrx installed via jockey on a Radeon HD 4290 (890GX Chipset), I get a seg fault when X starts. KMS is now enabled by default in Ubuntu, so I tried adding radeon.modeset=0 to the kernel parameters to see if that would help... nope.

The OSS driver looks good, but the 3d support isn't quite there yet, so I still need fglrx. Any ideas?

Xorg log will follow

**sandain** · 04-02-2010, 03:10 PM

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux whitney 2.6.32-19-generic #28-Ubuntu SMP Thu Apr 1 10:39:41 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=04a74c47-f7db-45ce-a368-1396a39dc4a5 ro radeon.modeset=0 quiet splash
Build Date: 30 March 2010 10:29:28PM
xorg-server 2:1.7.6-2ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri Apr 2 13:11:14 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7ca300
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:5:0) 1002:9714:1002:0000 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xfe5f0000/65536, 0xfe400000/1048576, I/O @ 0x0000b000/256
(--) PCI: (0:2:0:0) 14f1:8852:18ac:d618 Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder rev 2, Mem @ 0xfe600000/2097152
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
(II) ATI Proprietary Linux Driver Version Identifier:8.72.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.72.1
(II) ATI Proprietary Linux Driver Build Date: Mar 10 2010 23:41:33
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for fglrx
(II) PCS database file /etc/ati/amdpcsdb not found
(II) Creating PCS database from initial defaults instead
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9714) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
(II) AMD Video driver is running on a device generally supported by this driver
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xfd7230
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:5:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4290" (Chipset = 0x9714)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0000)
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe5f0000
(--) fglrx(0): I/O port at 0x0000b000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a3248]
1: /usr/bin/X (0x400000+0x655ad) [0x4655ad]
2: /lib/libpthread.so.0 (0x7f17419e0000+0xf8f0) [0x7f17419ef8f0]
3: /usr/bin/X (xf86findOption+0x20) [0x482590]
4: /usr/bin/X (xf86findOptionValue+0x9) [0x4825b9]
5: /usr/bin/X (0x400000+0x70abd) [0x470abd]
6: /usr/bin/X (xf86ProcessOptions+0x2e) [0x470f9e]
7: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86HandleInt10Options+0x80) [0x7f173e9ddc60]
8: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86ExtendedInitInt10+0x37) [0x7f173e9cc377]
9: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86InitInt10+0xb) [0x7f173e9cbedb]
10: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (0x7f173e3ba000+0x26e587) [0x7f173e628587]
11: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (0x7f173e3ba000+0x2739b3) [0x7f173e62d9b3]
12: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (atiddxPreInit+0x51e) [0x7f173e628d9e]
13: /usr/bin/X (InitOutput+0x552) [0x4739b2]
14: /usr/bin/X (0x400000+0x26005) [0x426005]
15: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f17406d8c4d]
16: /usr/bin/X (0x400000+0x25d59) [0x425d59]
Segmentation fault at address 0x37

Caught signal 11 (Segmentation fault). Server aborting

**kernelOfTruth** · 04-04-2010, 07:57 PM

I get the same:

5850:

http://pastebin.com/16jHJwuK

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux lupus 2.6.32-19-generic #28-Ubuntu SMP Thu Apr 1 10:39:41 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-19-generic root=/dev/mapper/sdc5_crypt ro quiet splash
Build Date: 30 March 2010 10:29:28PM
xorg-server 2:1.7.6-2ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 5 02:44:49 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7ca300
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:6899:1002:0b00 ATI Technologies Inc Cypress [Radeon HD 5800 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfbde0000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
(II) ATI Proprietary Linux Driver Version Identifier:8.72.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.72.1
(II) ATI Proprietary Linux Driver Build Date: Mar 10 2010 23:41:33
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) PCS database file /etc/ati/amdpcsdb not found
(II) Creating PCS database from initial defaults instead
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x6899) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x12a71a0
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 5800 Series " (Chipset = 0x6899)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0b00)
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfbde0000
(--) fglrx(0): I/O port at 0x0000c000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a3248]
1: /usr/bin/X (0x400000+0x655ad) [0x4655ad]
2: /lib/libpthread.so.0 (0x7fa58af76000+0xf8f0) [0x7fa58af858f0]
3: /usr/bin/X (xf86nameCompare+0x19) [0x483509]
4: /usr/bin/X (xf86findOption+0x2c) [0x48259c]
5: /usr/bin/X (xf86findOptionValue+0x9) [0x4825b9]
6: /usr/bin/X (0x400000+0x70abd) [0x470abd]
7: /usr/bin/X (xf86ProcessOptions+0x2e) [0x470f9e]
8: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86HandleInt10Options+0x80) [0x7fa587f73c60]
9: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86ExtendedInitInt10+0x37) [0x7fa587f62377]
10: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (xf86InitInt10+0xb) [0x7fa587f61edb]
11: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (0x7fa587950000+0x26e587) [0x7fa587bbe587]
12: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (0x7fa587950000+0x2739b3) [0x7fa587bc39b3]
13: /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (atiddxPreInit+0x51e) [0x7fa587bbed9e]
14: /usr/bin/X (InitOutput+0x552) [0x4739b2]
15: /usr/bin/X (0x400000+0x26005) [0x426005]
16: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa589c6ec4d]
17: /usr/bin/X (0x400000+0x25d59) [0x425d59]
Segmentation fault at address 0x352e32

Caught signal 11 (Segmentation fault). Server aborting

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

ddxSigGiveUp: Closing log

that's not the only info:

in the other log it says something

along MTRR ... ioctl error

strange is:

I THINK I got the same error on my gentoo system with xorg-server 1.6.5 which wouldn't show me a desktop or window manager but works with xorg-server 1.7.5 and displays everything except stuff that is dependent on libGl.so. ...

I'll see if I can note down the exact message - I believe that's the cause of fglrx not being able to run xorg and letting segfault X

perhaps someone else could look through their logs and post it as well ?

so we can nail it down ASAP and the fine devs @AMD could release a working driver

**kernelOfTruth** · 04-04-2010, 08:11 PM

well, after the restart the driver seems to load fine and shows the already mentioned behavior I get under my gentoo-system & xorg-server 1.7.5

so unfortunately I can't post the exact error-message involving mtrr

X loads fine now but everything accelerated doesn't work and now also leads to segfaults:

dmesg | grep err

[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 1.558752] ACPI: Using IOAPIC for interrupt routing
[ 1.579669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.579826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 1.579889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.579935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[ 1.579991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[ 1.580036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
[ 1.580081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 1.596732] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.596834] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.596931] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.597031] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.597131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.597230] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 1.597330] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.597430] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 3.446858] generic-usb: probe of 0003:0BDA:0182.0005 failed with error -22
[ 108.567656] glxinfo[2331]: segfault at 4 ip 00007f7d7c00911e sp 00007fff1661a8f0 error 4 in libGL.so.1.2[7f7d7bfb3000+a2000]
[ 122.168426] fglrxinfo[2337]: segfault at 4 ip 00007f5b527cf11e sp 00007ffff631c580 error 4 in libGL.so.1.2[7f5b52779000+a2000]

and here is the strace from fglrxinfo:

http://pastebin.com/qRHA5pfn

I dunno if it's useful, hopefully it is

**kernelOfTruth** · 04-04-2010, 08:13 PM

the strange thing is that afaik under my gentoo-system & fglrxinfo it at least shows the name of the card 5850 and the "compatibility profile"

the error message is also different (error 7)

but I'm sure Ubuntu's fixing currently is more important and as a side-effect it'll also be able to work correctly on my gentoo-system again

GO GO GO !

**kernelOfTruth** · 04-04-2010, 08:32 PM

at bugs.launchpad.net I'm appending my bugs under the nickname dalinuxlova (discarding might delete useful data) to the existing bug:

https://bugs.launchpad.net/ubuntu/+s...er/+bug/554057

**kernelOfTruth** · 04-05-2010, 06:07 AM

interesting:

the approach in the posted launchpad-bug worked !

remove any existing /etc/X11/xorg.conf (if at all) and

aticonfig --initial

should create the basic layout xorg.conf

after that compositing & X works flawlessly (at least on 10.04 amd64 here) for me:

glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
client glx vendor string: ATI
client glx version string: 1.4
client glx extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_NV_swap_group,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_swap_barrier, GLX_SGIX_swap_group,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_EXT_framebuffer_sRGB, GLX_ARB_fbconfig_float
GLX version: 1.4
GLX extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_NV_swap_group, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_swap_barrier,
GLX_SGIX_swap_group, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 5800 Series
OpenGL version string: 3.2.9737 Compatibility Profile Context
OpenGL shading language version string: 1.50

fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 5800 Series
OpenGL version string: 3.2.9737 Compatibility Profile Context

**kernelOfTruth** · 04-05-2010, 06:48 AM

this feels more and more like a monologue

I "feel" no increased latency during minimizing and maximizing of windows anymore:

has the backclear patch been incorporated into the official Lucid Lynx X-Server or did the driver get that far superior ?

**jrch2k8** · 04-05-2010, 10:25 AM

Originally Posted by kernelOfTruth

this feels more and more like a monologue

I "feel" no increased latency during minimizing and maximizing of windows anymore:

has the backclear patch been incorporated into the official Lucid Lynx X-Server or did the driver get that far superior ?

well they seems to finally got someone to do some basic quality assurance in the driver, i noticed that too and for first time in ages crossfire actually works without make a havoc of straces and black screens in my rig. my summary would

1. crosffire works +1
2. better 2d performance +1(finally!!!!)
3. 3d seems quite fast too +1 (basic 3d at least)
4. savages2 got a horrible noise in the audio but it renders fine -1

5. wine screwed as always at least for my games -1
6. video is super teared as normal -1
7. flash 10.1 with gpgpu works quite good now +1
8. dont work with preemptive kernels -1
9. composite works again lol +1
10. as always fglrx crash badly when you shutdown your pc -1

is not anything close to nvidia yet but is nice to finally see some love in the driver you know, and yes im pretty sure the xorg is patched

btw passing acpi=noirq helps with some issues

**sandain** · 04-12-2010, 11:31 AM

According to an article on Phoronix, this issue may be fixed. I'm tempted to give 10.04 + fglrx another try.

Thread: Ubuntu 10.04 + fglrx = seg fault

Thread Tools

Search Thread

Display

Ubuntu 10.04 + fglrx = seg fault

Posting Permissions