Results 1 to 2 of 2

Thread: HD5770 flex not supported by fglrx?

  1. #1
    Join Date
    Oct 2010
    Posts
    10

    Default HD5770 flex not supported by fglrx?

    Hi all,

    I recently bought the Sapphire Radeon HD 5770 flex edition. This card has an additional pixel clock on board so it can support 3 Displays without using DisplayPort. On Windows all works fine, including eyefinity (Surroundgaming really rocks!) But I can not get the Card working with fglrx even with only one dvi or vga Display connected.

    The opensource radeon driver supports the card, however only one connected output. As soon as I start gdm with fglrx enabled the screen goes blank for a second and than turns off.

    Using ubuntu 10.10 with fglrx from repository.

    Any clues?

    Xorg.0.log:
    Code:
    [    85.181] 
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [    85.184] X Protocol Version 11, Revision 0
    [    85.184] Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
    [    85.185] Current Operating System: Linux cleo 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64
    [    85.186] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=69af8e7d-4d45-468f-bf74-cbc998974ab6 ro single
    [    85.187] Build Date: 16 September 2010  06:18:41PM
    [    85.188] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) 
    [    85.189] Current version of pixman: 0.18.4
    [    85.190]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [    85.191] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    85.194] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 11 15:03:53 2010
    [    85.217] (==) Using config file: "/etc/X11/xorg.conf"
    [    85.218] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    85.249] (==) ServerLayout "aticonfig Layout"
    [    85.249] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [    85.249] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    [    85.249] (**) |   |-->Device "aticonfig-Device[0]-0"
    [    85.249] (==) Automatically adding devices
    [    85.249] (==) Automatically enabling devices
    [    85.269] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    85.269]     Entry deleted from font path.
    [    85.294] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
    [    85.294] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    85.294] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    85.294] (II) Loader magic: 0x7d0200
    [    85.294] (II) Module ABI versions:
    [    85.294]     X.Org ANSI C Emulation: 0.4
    [    85.294]     X.Org Video Driver: 8.0
    [    85.294]     X.Org XInput driver : 11.0
    [    85.294]     X.Org Server Extension : 4.0
    [    85.295] (--) PCI: (0:1:5:0) 1002:9714:1849:9714 rev 0, Mem @ 0xc0000000/134217728, 0xfe6f0000/65536, 0xfe500000/1048576, I/O @ 0x0000c000/256
    [    85.295] (--) PCI:*(0:4:0:0) 1002:68b8:174b:1484 rev 0, Mem @ 0xd0000000/268435456, 0xfe9e0000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [    85.295] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [    85.295] (II) "extmod" will be loaded by default.
    [    85.295] (II) "dbe" will be loaded by default.
    [    85.295] (II) "glx" will be loaded by default.
    [    85.295] (II) "record" will be loaded by default.
    [    85.295] (II) "dri" will be loaded by default.
    [    85.295] (II) "dri2" will be loaded by default.
    [    85.295] (II) LoadModule: "extmod"
    [    85.360] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    85.368] (II) Module extmod: vendor="X.Org Foundation"
    [    85.368]     compiled for 1.9.0, module version = 1.0.0
    [    85.368]     Module class: X.Org Server Extension
    [    85.368]     ABI class: X.Org Server Extension, version 4.0
    [    85.368] (II) Loading extension MIT-SCREEN-SAVER
    [    85.368] (II) Loading extension XFree86-VidModeExtension
    [    85.368] (II) Loading extension XFree86-DGA
    [    85.368] (II) Loading extension DPMS
    [    85.368] (II) Loading extension XVideo
    [    85.368] (II) Loading extension XVideo-MotionCompensation
    [    85.368] (II) Loading extension X-Resource
    [    85.368] (II) LoadModule: "dbe"
    [    85.368] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    85.369] (II) Module dbe: vendor="X.Org Foundation"
    [    85.369]     compiled for 1.9.0, module version = 1.0.0
    [    85.369]     Module class: X.Org Server Extension
    [    85.369]     ABI class: X.Org Server Extension, version 4.0
    [    85.369] (II) Loading extension DOUBLE-BUFFER
    [    85.369] (II) LoadModule: "glx"
    [    85.369] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
    [    85.392] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
    [    85.393]     compiled for 7.6.0, module version = 1.0.0
    [    85.393] (II) Loading extension GLX
    [    85.393] (II) LoadModule: "record"
    [    85.393] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    85.399] (II) Module record: vendor="X.Org Foundation"
    [    85.399]     compiled for 1.9.0, module version = 1.13.0
    [    85.399]     Module class: X.Org Server Extension
    [    85.399]     ABI class: X.Org Server Extension, version 4.0
    [    85.399] (II) Loading extension RECORD
    [    85.399] (II) LoadModule: "dri"
    [    85.399] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    85.408] (II) Module dri: vendor="X.Org Foundation"
    [    85.408]     compiled for 1.9.0, module version = 1.0.0
    [    85.408]     ABI class: X.Org Server Extension, version 4.0
    [    85.408] (II) Loading extension XFree86-DRI
    [    85.408] (II) LoadModule: "dri2"
    [    85.408] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    85.409] (II) Module dri2: vendor="X.Org Foundation"
    [    85.409]     compiled for 1.9.0, module version = 1.2.0
    [    85.409]     ABI class: X.Org Server Extension, version 4.0
    [    85.409] (II) Loading extension DRI2
    [    85.409] (II) LoadModule: "fglrx"
    [    85.409] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
    [    85.545] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [    85.554]     compiled for 1.4.99.906, module version = 8.78.30
    [    85.554]     Module class: X.Org Video Driver
    [    85.567] (II) Loading sub module "fglrxdrm"
    [    85.567] (II) LoadModule: "fglrxdrm"
    [    85.567] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    85.580] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    85.580]     compiled for 1.8.99.905, module version = 8.78.30
    [    85.580] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30
    [    85.580] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3                               
    [    85.580] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:31:08
    [    85.580] (--) using VT number 2
    
    [    86.019] (WW) Falling back to old probe method for fglrx
    [    86.065] (II) Loading PCS database from /etc/ati/amdpcsdb
    [    86.074] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:0) found
    [    86.074] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
    [    86.080] (WW) fglrx: No matching Device section for instance (BusID PCI:0@4:0:1) found
    [    86.080] (**) ChipID override: 0x9714
    [    86.080] (**) Chipset Supported AMD Graphics Processor (0x9714) found
    [    86.081] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [    86.081] (II) AMD Video driver is signed
    [    86.081] (II) fglrx(0): pEnt->device->identifier=0xa325c0
    [    86.081] (II) pEnt->device->identifier=(nil)
    [    86.081] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
    [    86.082] (II) Loading sub module "vgahw"
    [    86.082] (II) LoadModule: "vgahw"
    [    86.088] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [    86.093] (II) Module vgahw: vendor="X.Org Foundation"
    [    86.093]     compiled for 1.9.0, module version = 0.1.0
    [    86.093]     ABI class: X.Org Video Driver, version 8.0
    [    86.093] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [    86.093] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    86.093] (==) fglrx(0): Default visual is TrueColor
    [    86.093] (**) fglrx(0): Option "DPMS" "true"
    [    86.093] (==) fglrx(0): RGB weight 888
    [    86.093] (II) fglrx(0): Using 8 bits per RGB 
    [    86.093] (==) fglrx(0): Buffer Tiling is ON
    [    86.104] (II) Loading sub module "fglrxdrm"
    [    86.104] (II) LoadModule: "fglrxdrm"
    [    86.104] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    86.105] ukiDynamicMajor: found major device number 250
    [    86.105] ukiDynamicMajor: found major device number 250
    [    86.105] ukiOpenByBusid: Searching for BusID PCI:4:0:0
    [    86.105] ukiOpenDevice: node name is /dev/ati/card0
    [    86.105] ukiOpenDevice: open result is 12, (OK)
    [    86.105] ukiOpenByBusid: ukiOpenMinor returns 12
    [    86.105] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    86.105] ukiOpenDevice: node name is /dev/ati/card1
    [    86.105] ukiOpenDevice: open result is 12, (OK)
    [    86.105] ukiOpenByBusid: ukiOpenMinor returns 12
    [    86.105] ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
    [    86.105] ukiDynamicMajor: found major device number 250
    [    86.105] ukiDynamicMajor: found major device number 250
    [    86.105] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    86.105] ukiOpenDevice: node name is /dev/ati/card0
    [    86.105] ukiOpenDevice: open result is 13, (OK)
    [    86.105] ukiOpenByBusid: ukiOpenMinor returns 13
    [    86.105] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    86.105] (==) fglrx(0): NoAccel = NO
    [    86.105] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
    [    86.105] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8)
    [    86.105] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x1484)
    [    86.105] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [    86.105] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [    86.105] (--) fglrx(0): MMIO registers at 0xfe9e0000
    [    86.105] (--) fglrx(0): I/O port at 0x0000e000
    [    86.106] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [    86.116] (II) fglrx(0): AC Adapter is used
    [    86.128] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [    86.129] (II) Loading sub module "vbe"
    [    86.129] (II) LoadModule: "vbe"
    [    86.129] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [    86.129] (II) Module vbe: vendor="X.Org Foundation"
    [    86.129]     compiled for 1.9.0, module version = 1.1.0
    [    86.129]     ABI class: X.Org Video Driver, version 8.0
    [    86.130] (II) fglrx(0): VESA BIOS detected
    [    86.130] (II) fglrx(0): VESA VBE Version 3.0
    [    86.130] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [    86.130] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    [    86.130] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
    [    86.130] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
    [    86.130] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
    [    86.130] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [    86.155] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [    86.155] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
    [    86.155] (II) fglrx(0): PCIE card detected
    [    86.155] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [    86.155] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [    86.155] (--) fglrx(0): (PciSubVendor = 0x1849, PciSubDevice = 0x9714)
    [    86.155] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [    86.155] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [    86.155] (--) fglrx(0): MMIO registers at 0xfe6f0000
    [    86.155] (--) fglrx(0): I/O port at 0x0000c000
    [    86.155] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [    86.156] (II) fglrx(0): AC Adapter is used
    [    86.157] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
    [    86.157] (EE) fglrx(0): Invalid video BIOS signature!
    [    86.157] (EE) fglrx(0): GetBIOSParameter failed
    [    86.157] (EE) fglrx(0): PreInitAdapter for slave 0 failed
    [    86.157] (EE) fglrx(0): PreInit failed
    [    86.157] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === end
    [    86.930] (II) UnloadModule: "fglrx"
    [    86.930] (II) UnloadModule: "vbe"
    [    86.930] (II) Unloading /usr/lib/xorg/modules/libvbe.so
    [    86.930] (II) UnloadModule: "fglrxdrm"
    [    86.930] (II) UnloadModule: "vgahw"
    [    86.930] (II) Unloading /usr/lib/xorg/modules/libvgahw.so
    [    86.930] (II) UnloadModule: "fglrxdrm"
    [    86.930] (EE) Screen(s) found, but none have a usable configuration.
    [    86.930] 
    Fatal server error:
    [    86.930] no screens found
    [    86.930] 
    Please consult the The X.Org Foundation support 
         at http://wiki.x.org
     for help. 
    [    86.930] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [    86.930] 
    [    89.789]  ddxSigGiveUp: Closing log
    xorg.conf (from aticonfig --initial):
    Code:
    Section "ServerLayout"
        Identifier     "aticonfig Layout"
        Screen      0  "aticonfig-Screen[0]-0" 0 0
    EndSection
    
    Section "Module"
    EndSection
    
    Section "Monitor"
        Identifier   "aticonfig-Monitor[0]-0"
        Option        "VendorName" "ATI Proprietary Driver"
        Option        "ModelName" "Generic Autodetecting Monitor"
        Option        "DPMS" "true"
    EndSection
    
    Section "Device"
        Identifier  "aticonfig-Device[0]-0"
        Driver      "fglrx"
        BusID       "PCI:4:0:0"
    EndSection
    
    Section "Screen"
        Identifier "aticonfig-Screen[0]-0"
        Device     "aticonfig-Device[0]-0"
        Monitor    "aticonfig-Monitor[0]-0"
        DefaultDepth     24
        SubSection "Display"
            Viewport   0 0
            Depth     24
        EndSubSection
    EndSection

  2. #2
    Join Date
    Oct 2010
    Posts
    10

    Default

    Fixed it: had to disable the IGP (HD4290). Working great now :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •