Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ATI + Livna drivers + direct rendering issue

Hybrid View

  1. #1
    Join Date
    Oct 2006
    Posts
    12

    Default ATI + Livna drivers + direct rendering issue

    I just clean installed Fedora Core 6 x86_64 on my system. I have an ATI Xpress 200 card. I have an AMD 2800+ processor and 1 GB Ram.
    I installed yumex and then installed
    xorg-x11-drv-fglrx-8.29.6-1.lvn6
    kmod-fglrx-8.29.6-1.2.6.18_1.2798.fc6
    from the livna repository.
    My scren resolution changed from 800X600 to 1280x1024 after a reboot. When i run glxinfo | grep direct i get:

    direct rendering: No
    OpenGL renderer string: Mesa GLX Indirect

    Also when i run fglrxinfo i get:

    display: :0.0 screen: 0
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

    After googling a bit i found that this means that my drivers are not installed. But i can see the ATI Control Panel.

    Also i have not been able to install the ATI 8.29.x or ATI 8.30.x drivers because of errors posted in other threads in this forum. I have tried each and everything that i could find in this and other forums and still ended up with nothing.

    I am posting my xorg.conf file below:


    # Xorg configuration created by pyxf86config

    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "aticonfig-Screen[0]" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"
    EndSection

    Section "Module"
    Load "dri"
    Load "glx"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection

    Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "radeon"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Hopefully now i can get a solution from someone. Please help me out! Thank you in advance.

    PS. I would like to get compiz running either on xgl or AIGLX. I tried installing xgl and ended up failing miserably. That's why i have gone back to the clean install!

  2. #2

    Default

    The ATI fglrx drivers do not support AIGLX.

    What is the output of your X log? It would help greatly in figuring out your problem.

  3. #3
    Join Date
    Oct 2006
    Posts
    12

    Default Unable to post here

    When i try to post the file i am getting this error:
    An appropriate representation of the requested resource /forums/newreply.php could not be found on this server.

  4. #4

    Default

    copy and paste the portion where you see errors (EE) or use a free hosting service like YouSendIt.com.

  5. #5
    Join Date
    Oct 2006
    Posts
    12

    Default I'll post the file i parts

    Thanks for the quick reply Michael. Here is my Xorg.0.log:


    X Window System Version 7.1.1
    Release Date: 12 May 2006
    X Protocol Version 11, Revision 0, Release 7.1.1
    Build Operating System: Linux 2.6.9-34.ELsmp x86_64 Red Hat, Inc.
    Current Operating System: Linux Leo 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:39:22 EDT 2006 x86_64
    Build Date: 04 October 2006
    Build ID: xorg-x11-server 1.1.1-47.fc6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 2 17:29:27 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "aticonfig-Screen[0]" (0)
    (**) | |-->Monitor "aticonfig-Monitor[0]"
    (**) | |-->Device "aticonfig-Device[0]"
    (**) |-->Input Device "Keyboard0"
    (==) |-->Input Device "<default pointer>"
    (WW) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    (==) FontPath set to:
    unix/:7100,
    built-ins
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib64/xorg/modules"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.0
    X.Org XInput driver : 0.6
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib64/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (++) using VT number 7

  6. #6
    Join Date
    Oct 2006
    Posts
    12

    Default

    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5950 card 1462,7141 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:11:0: chip 1002,437a card 1462,7141 rev 00 class 01,01,8f hdr 00
    (II) PCI: 00:12:0: chip 1002,4379 card 1462,7141 rev 00 class 01,01,8f hdr 00
    (II) PCI: 00:13:0: chip 1002,4374 card 1462,7141 rev 00 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4375 card 1462,7141 rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4373 card 1462,7141 rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4372 card 1462,7141 rev 04 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,4376 card 1462,7141 rev 00 class 01,01,8a hdr 00
    (II) PCI: 00:14:3: chip 1002,4377 card 1462,7141 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
    (II) PCI: 00:14:5: chip 1002,4370 card 1462,0080 rev 00 class 04,01,00 hdr 80
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:05:0: chip 1002,5954 card 1462,7141 rev 00 class 03,00,00 hdr 00
    (II) PCI: 02:03:0: chip 10ec,8139 card 1462,093c rev 10 class 02,00,00 hdr 00
    (II) PCI: 02:04:0: chip 1106,3044 card 1462,093d rev 80 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX[B]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B]
    (--) PCI:*(1:5:0) ATI Technologies Inc RS480 [Radeon Xpress 200G Series] rev 0, Mem @ 0xd0000000/28, 0xfddf0000/16, I/O @ 0xef00/8
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
    (EE) end of block range 0x1fffffff < begin 0xe0000000
    (II) Active PCI resource ranges:
    [0] -1 0 0xfdcfe000 - 0xfdcfe7ff (0x800) MX[B]
    [1] -1 0 0xfdcff000 - 0xfdcff0ff (0x100) MX[B]
    [2] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B]
    [3] -1 0 0xfe02a000 - 0xfe02a3ff (0x400) MX[B]
    [4] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
    [5] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
    [6] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
    [7] -1 0 0xfe02e000 - 0xfe02e1ff (0x200) MX[B]
    [8] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[B]
    [9] -1 0 0xfddf0000 - 0xfddfffff (0x10000) MX[B](B)
    [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
    [11] -1 0 0x0000de00 - 0x0000de7f (0x80) IX[B]
    [12] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[B]
    [13] -1 0 0x0000f300 - 0x0000f30f (0x10) IX[B]
    [14] -1 0 0x00000400 - 0x0000040f (0x10) IX[B]
    [15] -1 0 0x0000f500 - 0x0000f50f (0x10) IX[B]
    [16] -1 0 0x0000f600 - 0x0000f603 (0x4) IX[B]
    [17] -1 0 0x0000f700 - 0x0000f707 (0x8) IX[B]
    [18] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B]
    [19] -1 0 0x0000f900 - 0x0000f907 (0x8) IX[B]
    [20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[B]
    [21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[B]
    [22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B]
    [23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[B]
    [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
    [25] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0x00004100 - 0x000040ff (0x0) IX[B]O

  7. #7

    Default

    The errors tend to occur towards the bottom of the file. Look for lines with errors. Perhaps cat /var/log/Xorg.0.log | grep "EE"

  8. #8
    Join Date
    Oct 2006
    Posts
    12

    Default

    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfdcfe000 - 0xfdcfe7ff (0x800) MX[B]
    [1] -1 0 0xfdcff000 - 0xfdcff0ff (0x100) MX[B]
    [2] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B]
    [3] -1 0 0xfe02a000 - 0xfe02a3ff (0x400) MX[B]
    [4] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
    [5] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
    [6] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
    [7] -1 0 0xfe02e000 - 0xfe02e1ff (0x200) MX[B]
    [8] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[B]
    [9] -1 0 0xfddf0000 - 0xfddfffff (0x10000) MX[B](B)
    [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
    [11] -1 0 0x0000de00 - 0x0000de7f (0x80) IX[B]
    [12] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[B]
    [13] -1 0 0x0000f300 - 0x0000f30f (0x10) IX[B]
    [14] -1 0 0x00000400 - 0x0000040f (0x10) IX[B]
    [15] -1 0 0x0000f500 - 0x0000f50f (0x10) IX[B]
    [16] -1 0 0x0000f600 - 0x0000f603 (0x4) IX[B]
    [17] -1 0 0x0000f700 - 0x0000f707 (0x8) IX[B]
    [18] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B]
    [19] -1 0 0x0000f900 - 0x0000f907 (0x8) IX[B]
    [20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[B]
    [21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[B]
    [22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B]
    [23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[B]
    [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
    [25] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0x00004100 - 0x000040ff (0x0) IX[B]O
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xfdcfe000 - 0xfdcfe7ff (0x800) MX[B]
    [5] -1 0 0xfdcff000 - 0xfdcff0ff (0x100) MX[B]
    [6] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B]
    [7] -1 0 0xfe02a000 - 0xfe02a3ff (0x400) MX[B]
    [8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
    [9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
    [10] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
    [11] -1 0 0xfe02e000 - 0xfe02e1ff (0x200) MX[B]
    [12] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[B]
    [13] -1 0 0xfddf0000 - 0xfddfffff (0x10000) MX[B](B)
    [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000de00 - 0x0000de7f (0x80) IX[B]
    [18] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[B]
    [19] -1 0 0x0000f300 - 0x0000f30f (0x10) IX[B]
    [20] -1 0 0x00000400 - 0x0000040f (0x10) IX[B]
    [21] -1 0 0x0000f500 - 0x0000f50f (0x10) IX[B]
    [22] -1 0 0x0000f600 - 0x0000f603 (0x4) IX[B]
    [23] -1 0 0x0000f700 - 0x0000f707 (0x8) IX[B]
    [24] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B]
    [25] -1 0 0x0000f900 - 0x0000f907 (0x8) IX[B]
    [26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[B]
    [27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[B]
    [28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B]
    [29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[B]
    [30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
    [31] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
    [32] -1 0 0x00004100 - 0x000040ff (0x0) IX[B]O

  9. #9
    Join Date
    Oct 2006
    Posts
    12

    Default

    i'll post the lines where i see (EE):

    Build ID: xorg-x11-server 1.1.1-47.fc6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 2 17:29:27 2006
    (==) Using config file: "/etc/X11/xorg.conf"


    (II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
    (EE) end of block range 0x1fffffff < begin 0xe0000000

    (II) fglrx(0): pEnt->device->identifier=0x7d2350
    (EE) end of block range 0x1fffffff < begin 0xe0000000

    (EE) AIGLX: Screen 0 is not DRI capable

  10. #10
    Join Date
    Nov 2006
    Posts
    7

    Default

    Hello!

    I had the same problem when installing the fglrx rivers.
    Try to do the following:

    su -
    cd /usr/lib
    ln -sf /usr/lib/ati-fglrx/libGL.so.1.2 libGL.so.1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •