Results 1 to 6 of 6

Thread: Mobility Radeon HD 5800 Series driver doesn't work.

  1. #1
    Join Date
    Feb 2011
    Posts
    2

    Default Mobility Radeon HD 5800 Series driver doesn't work.

    I have an ATI HD 5830 Radeon graphic card. I have downloaded and installed the drivers from the official website. The problem is that I haven't my graphic card accelerated. When I type in the konsole fglrxinfo i get this:

    X Error of failed request: BadRequest (invalid request code or no such operation)
    Major opcode of failed request: 137 (GLX)
    Minor opcode of failed request: 19 (X_GLXQueryServerString)
    Serial number of failed request: 18
    Current serial number in output stream: 18

    Any ideas?? Thanks in advance.

    P.S: I'm using Ubuntu 10.10 x64 on a HP Envy 15.

  2. #2
    Join Date
    Jun 2008
    Posts
    197

    Default

    Post your Xorg log.

    On ubuntu its here -> /var/log/Xorg.0.log

  3. #3
    Join Date
    Feb 2011
    Posts
    2

    Default

    [ 24.171] (II) fglrx(0): EDID for output DFP1
    [ 24.171] (II) fglrx(0): Output LVDS connected
    [ 24.171] (II) fglrx(0): Output DFP1 disconnected
    [ 24.171] (II) fglrx(0): Using exact sizes for initial modes
    [ 24.171] (II) fglrx(0): Output LVDS using initial mode 1920x1080
    [ 24.171] (II) fglrx(0): Display dimensions: (350, 190) mm
    [ 24.171] (II) fglrx(0): DPI set to (139, 144)
    [ 24.171] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5800 Series has 2 configurable heads and 1 displays connected.
    [ 24.172] (==) fglrx(0): PseudoColor visuals disabled
    [ 24.172] (II) Loading sub module "ramdac"
    [ 24.172] (II) LoadModule: "ramdac"
    [ 24.172] (II) Module "ramdac" already built-in
    [ 24.172] (==) fglrx(0): NoDRI = NO
    [ 24.172] (==) fglrx(0): Capabilities: 0x00000000
    [ 24.172] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 24.172] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 24.172] (**) fglrx(0): UseFastTLS=0
    [ 24.172] (==) fglrx(0): BlockSignalsOnLock=1
    [ 24.172] (--) Depth 24 pixmap format is 32 bpp
    [ 24.172] (II) Loading extension ATIFGLRXDRI
    [ 24.172] (II) fglrx(0): doing swlDriScreenInit
    [ 24.172] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 24.172] ukiDynamicMajor: found major device number 251
    [ 24.173] ukiDynamicMajor: found major device number 251
    [ 24.173] ukiDynamicMajor: found major device number 251
    [ 24.173] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 24.173] ukiOpenDevice: node name is /dev/ati/card0
    [ 24.173] ukiOpenDevice: open result is 16, (OK)
    [ 24.173] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 24.173] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 24.173] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 24.173] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 24.173] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 24.173] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f8cc68cd000
    [ 24.173] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 24.173] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 24.173] (II) fglrx(0): swlDriScreenInit done
    [ 24.173] (II) fglrx(0): Kernel Module Version Information:
    [ 24.173] (II) fglrx(0): Name: fglrx
    [ 24.173] (II) fglrx(0): Version: 8.82.8
    [ 24.173] (II) fglrx(0): Date: Jan 26 2011
    [ 24.173] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    [ 24.173] (II) fglrx(0): Kernel Module version matches driver.
    [ 24.173] (II) fglrx(0): Kernel Module Build Time Information:
    [ 24.174] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-25-generic
    [ 24.174] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 24.174] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 24.174] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 24.174] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 24.214] (II) fglrx(0): DRI initialization successfull
    [ 24.214] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
    [ 24.244] (==) fglrx(0): Backing store disabled
    [ 24.244] (II) Loading extension FGLRXEXTENSION
    [ 24.244] (**) fglrx(0): DPMS enabled
    [ 24.245] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 24.245] (**) fglrx(0): Textured Video is enabled.
    [ 24.245] (II) LoadModule: "glesx"
    [ 24.246] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
    [ 24.366] (II) Module glesx: vendor="X.Org Foundation"
    [ 24.366] compiled for 1.4.99.906, module version = 1.0.0
    [ 24.366] (II) Loading extension GLESX
    [ 24.366] (II) fglrx(0): GLESX enableFlags = 592
    [ 24.366] (II) fglrx(0): GLESX is enabled
    [ 24.366] (II) LoadModule: "amdxmm"
    [ 24.367] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
    [ 24.369] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 24.369] compiled for 1.4.99.906, module version = 2.0.0
    [ 24.371] (II) Loading extension AMDXVOPL
    [ 24.371] (II) Loading extension AMDXVBA
    [ 24.435] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 24.438] (II) fglrx(0): Enable composite support successfully
    [ 24.444] (WW) fglrx(0): Option "VendorName" is not used
    [ 24.444] (WW) fglrx(0): Option "ModelName" is not used
    [ 24.444] (II) fglrx(0): X context handle = 0x1
    [ 24.444] (II) fglrx(0): [DRI] installation complete
    [ 24.448] (==) fglrx(0): Silken mouse enabled
    [ 24.449] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 24.449] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [ 24.450] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
    [ 24.450] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
    [ 25.092] (--) RandR disabled
    [ 25.092] (II) Initializing built-in extension Generic Event Extension
    [ 25.092] (II) Initializing built-in extension SHAPE
    [ 25.092] (II) Initializing built-in extension MIT-SHM
    [ 25.092] (II) Initializing built-in extension XInputExtension
    [ 25.092] (II) Initializing built-in extension XTEST
    [ 25.092] (II) Initializing built-in extension BIG-REQUESTS
    [ 25.092] (II) Initializing built-in extension SYNC
    [ 25.092] (II) Initializing built-in extension XKEYBOARD
    [ 25.092] (II) Initializing built-in extension XC-MISC
    [ 25.092] (II) Initializing built-in extension SECURITY
    [ 25.092] (II) Initializing built-in extension XINERAMA
    [ 25.092] (II) Initializing built-in extension XFIXES
    [ 25.092] (II) Initializing built-in extension RENDER
    [ 25.092] (II) Initializing built-in extension RANDR
    [ 25.092] (II) Initializing built-in extension COMPOSITE
    [ 25.092] (II) Initializing built-in extension DAMAGE
    [ 25.092] (II) Initializing built-in extension GESTURE
    [ 25.097] ukiDynamicMajor: found major device number 251
    [ 25.097] ukiDynamicMajor: found major device number 251
    [ 25.097] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 25.097] ukiOpenDevice: node name is /dev/ati/card0
    [ 25.097] ukiOpenDevice: open result is 17, (OK)
    [ 25.097] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 25.097] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 25.956] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 25.984] (II) fglrx(0): Enable the clock gating!
    [ 25.984] (II) fglrx(0): Setting screen physical size to 508 x 285
    [ 26.111] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [ 26.142] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 26.142] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 26.142] (II) LoadModule: "evdev"
    [ 26.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 26.167] (II) Module evdev: vendor="X.Org Foundation"
    [ 26.167] compiled for 1.9.0, module version = 2.3.2
    [ 26.167] Module class: X.Org XInput Driver
    [ 26.167] ABI class: X.Org XInput driver, version 11.0
    [ 26.167] (**) Power Button: always reports core events
    [ 26.167] (**) Power Button: Device: "/dev/input/event2"
    [ 26.231] (II) Power Button: Found keys
    [ 26.231] (II) Power Button: Configuring as keyboard
    [ 26.231] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 26.231] (**) Option "xkb_rules" "evdev"
    [ 26.231] (**) Option "xkb_model" "evdev"
    [ 26.231] (**) Option "xkb_layout" "es"
    [ 26.235] (II) XKB: reuse xkmfile /var/lib/xkb/server-188C20793BE00CBD61865C180F610EC4A3A6D8CD.xkm
    [ 26.239] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 26.239] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 26.239] (**) Video Bus: always reports core events
    [ 26.239] (**) Video Bus: Device: "/dev/input/event6"
    [ 26.311] (II) Video Bus: Found keys
    [ 26.311] (II) Video Bus: Configuring as keyboard
    [ 26.311] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 26.311] (**) Option "xkb_rules" "evdev"
    [ 26.311] (**) Option "xkb_model" "evdev"
    [ 26.311] (**) Option "xkb_layout" "es"
    [ 26.312] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 26.312] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 26.313] (**) Power Button: always reports core events
    [ 26.313] (**) Power Button: Device: "/dev/input/event0"
    [ 26.391] (II) Power Button: Found keys
    [ 26.391] (II) Power Button: Configuring as keyboard
    [ 26.391] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 26.391] (**) Option "xkb_rules" "evdev"
    [ 26.391] (**) Option "xkb_model" "evdev"
    [ 26.391] (**) Option "xkb_layout" "es"
    [ 26.392] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 26.392] (II) No input driver/identifier specified (ignoring)
    [ 26.394] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
    [ 26.394] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 26.394] (**) Logitech USB Receiver: always reports core events
    [ 26.394] (**) Logitech USB Receiver: Device: "/dev/input/event9"
    [ 26.471] (II) Logitech USB Receiver: Found 20 mouse buttons
    [ 26.471] (II) Logitech USB Receiver: Found scroll wheel(s)
    [ 26.471] (II) Logitech USB Receiver: Found relative axes
    [ 26.471] (II) Logitech USB Receiver: Found x and y relative axes
    [ 26.471] (II) Logitech USB Receiver: Configuring as mouse
    [ 26.471] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 26.471] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 26.471] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    [ 26.471] (II) Logitech USB Receiver: initialized for relative axes.
    [ 26.472] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
    [ 26.472] (II) No input driver/identifier specified (ignoring)
    [ 26.473] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
    [ 26.473] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 26.473] (**) Logitech USB Receiver: always reports core events
    [ 26.473] (**) Logitech USB Receiver: Device: "/dev/input/event10"
    [ 26.591] (II) Logitech USB Receiver: Found 1 mouse buttons
    [ 26.591] (II) Logitech USB Receiver: Found scroll wheel(s)
    [ 26.591] (II) Logitech USB Receiver: Found relative axes
    [ 26.591] (II) Logitech USB Receiver: Found absolute axes
    [ 26.591] (II) evdev-grail: failed to open grail, no gesture support
    [ 26.591] (II) Logitech USB Receiver: Found keys
    [ 26.591] (II) Logitech USB Receiver: Configuring as mouse
    [ 26.591] (II) Logitech USB Receiver: Configuring as keyboard
    [ 26.591] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 26.591] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 26.591] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 26.591] (**) Option "xkb_rules" "evdev"
    [ 26.591] (**) Option "xkb_model" "evdev"
    [ 26.591] (**) Option "xkb_layout" "es"
    [ 26.592] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [ 26.592] (II) Logitech USB Receiver: initialized for absolute axes.
    [ 26.594] (II) config/udev: Adding input device HDA Intel Mic at Ext Rear Jack (/dev/input/event11)
    [ 26.594] (II) No input driver/identifier specified (ignoring)
    [ 26.595] (II) config/udev: Adding input device HDA Intel HP Out at Ext Rear Jack (/dev/input/event12)
    [ 26.595] (II) No input driver/identifier specified (ignoring)
    [ 26.597] (II) config/udev: Adding input device HP Webcam (/dev/input/event7)
    [ 26.597] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
    [ 26.597] (**) HP Webcam: always reports core events
    [ 26.597] (**) HP Webcam: Device: "/dev/input/event7"
    [ 26.711] (II) HP Webcam: Found keys
    [ 26.711] (II) HP Webcam: Configuring as keyboard
    [ 26.711] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
    [ 26.711] (**) Option "xkb_rules" "evdev"
    [ 26.711] (**) Option "xkb_model" "evdev"
    [ 26.711] (**) Option "xkb_layout" "es"
    [ 26.716] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [ 26.716] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 26.716] (**) AT Translated Set 2 keyboard: always reports core events
    [ 26.716] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [ 26.791] (II) AT Translated Set 2 keyboard: Found keys
    [ 26.791] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 26.791] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 26.791] (**) Option "xkb_rules" "evdev"
    [ 26.791] (**) Option "xkb_model" "evdev"
    [ 26.791] (**) Option "xkb_layout" "es"
    [ 26.792] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 26.792] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 26.792] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 26.792] (II) LoadModule: "synaptics"
    [ 26.793] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 26.812] (II) Module synaptics: vendor="X.Org Foundation"
    [ 26.812] compiled for 1.9.0, module version = 1.2.2
    [ 26.812] Module class: X.Org XInput Driver
    [ 26.812] ABI class: X.Org XInput driver, version 11.0
    [ 26.812] (II) Synaptics touchpad driver version 1.2.2
    [ 26.812] (**) Option "Device" "/dev/input/event8"
    [ 27.191] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5458
    [ 27.191] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4514
    [ 27.191] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 27.191] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 27.191] (II) SynPS/2 Synaptics TouchPad: buttons: left
    [ 27.491] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 27.491] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 27.641] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 27.641] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 27.641] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 27.641] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 27.641] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 27.881] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 27.881] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 27.881] (II) No input driver/identifier specified (ignoring)
    [ 27.882] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
    [ 27.882] (II) No input driver/identifier specified (ignoring)
    [ 27.882] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 27.882] (II) No input driver/identifier specified (ignoring)
    [ 27.887] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
    [ 27.887] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 27.887] (**) HP WMI hotkeys: always reports core events
    [ 27.887] (**) HP WMI hotkeys: Device: "/dev/input/event4"
    [ 27.961] (II) HP WMI hotkeys: Found keys
    [ 27.961] (II) HP WMI hotkeys: Configuring as keyboard
    [ 27.961] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
    [ 27.961] (**) Option "xkb_rules" "evdev"
    [ 27.961] (**) Option "xkb_model" "evdev"
    [ 27.961] (**) Option "xkb_layout" "es"
    [ 27.974] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 29.729] (II) fglrx(0): EDID vendor "LGD", prod id 613
    [ 29.729] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 29.729] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 29.733] (II) fglrx(0): EDID vendor "LGD", prod id 613
    [ 29.733] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 29.733] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)

  4. #4
    Join Date
    Feb 2010
    Posts
    519

    Default

    That's looking just fine to me...

    I notice you're running the 64-bit version. I've had better success getting the drivers to work right if I first shutdown the X server (note - I'm using openSUSE).
    On Ubuntu that would be (from a virtual terminal, e.g. pressing Alt+Ctrl+F2 and logging in):
    Code:
    sudo service gdm stop

  5. #5
    Join Date
    Feb 2010
    Posts
    519

    Default

    Quote Originally Posted by PsynoKhi0 View Post
    That's looking just fine to me...

    I notice you're running the 64-bit version. I've had better success getting the drivers to work right if I first shutdown the X server before installing FGLRX(note - I'm using openSUSE).
    On Ubuntu that would be (from a virtual terminal, e.g. pressing Alt+Ctrl+F2 and logging in):
    Code:
    sudo service gdm stop
    Poor man's edit...

  6. #6
    Join Date
    Jun 2008
    Posts
    197

    Default

    Make sure you have the fglrx kernel module loaded. Post your dmesg output.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •