Page 1 of 6 123 ... LastLast
Results 1 to 10 of 51

Thread: Linux is a No-Go on My System :(

  1. #1
    Join Date
    Jul 2006
    Posts
    36

    Default Linux is a No-Go on My System :(

    I've been tryng for over a week to get Ubuntu 6.06 installed onto my system, and the Ubuntu people (both forums and IRC channel) can't help (but not for lack of trying). I figure I must have either a defective hard drive, or a defective motherboard. Here's my tale of woe

    System:
    ASRock 939Dual Sata2 motherboard with 2.10 BIOS
    AMD64 3500 Winchester (not overclocked)
    1GB Patriot PC3200 RAM (not overclocked)
    eVGA 7900GTX (not the overclocked one, and not overclocked by me) (brand new)
    hda=new Seagate 200gb EIDE (brand new)
    hdb=80gb Western Digital EIDE
    sda=SATA1 160gb Western Digital
    sdb=SATA2 160gb Western Digital
    cda=LITE-ON CD/DVD writer (brand new)
    keyboard and mouse are PS/2
    19-inch LCD monitor with native resolution of 1280x1024.

    Other info:
    1) I'm using the onboard NIC and sound components.

    2) I'm NOT using raid.

    3) I'm NOT using the SATA2 controller at all, but it's set to "IDE " and is disabled in BIOS.

    4) I'm NOT dual booting.


    Observations:
    1) Windows 2000 Pro runs flawlessly on this box. In case you're wondering, I have Wndows installed on a separate boot drive (80gb Western Digital EIDE), and I swap the two boot drives using a removable drive tray setup.

    2) The Ubuntu 6.06 live cd boots up fine (even sees the NIC and sound components)


    Problems:
    1) If I try to install with the SATA drives connected, the install freezes at seemingly random spots near the end of the install process (88-97%).

    2) If I disconnect the SATA drives, the install hangs after I click "restart computer" in the final dialog box. It hangs when it's trying to "shutdown the LVM volume groups". If I do a cold restart, it will start to boot into Linux, but will hang at "loading hardware drivers".

    3) Last Monday, I got it installed, and it even booted into the OS, but I had other Windows things to do, so I shutdown and swapped the boot drives out. I used Windows for the rest of the week.

    4) Just this last Saturday, I swapped the boot drives and tried to boot Ubuntu and it hung up at "loading hardware drivers". I haven't been able to boot or reinstall successfully since.


    Things I've Tried:
    1)Physically disconnecting the SATA drives

    2) Disconnecting all USB devices

    3) Turning off legacy USB and USB 2.0 support in the BIOS

    4) Burning the distro CD at speeds from 8x to 48x

    5) Burning to different brands of writable media

    6) Installing the amd64 version of the distro

    7) Non-graphical installers

    8) Installing other distros (including older versions of Ubuntu).

    I've tried everything I know to try, and some things other people have suggested, but the box is simply rejecting any install of Linux.


    [b]Conclusion:

    I consider myself to be pretty freakin' savvy where building a PC is concered - I've been doing it since about 1986 - but this has me completely stumped. Since there's no incompatible hardware in my setup, I think that one of two things is wrong:

    1) The motherboard is flakey

    2) The 200gb hard drive that I'm trying to install Linux on is flakey

    My first instinct is to say that the act of installing Linux has somehow exposed a flaw in the motherboard, but at this point, it's just a guess since the live-cd boots without any problems at all.

    Can anyone here provide any guidance?

  2. #2

    Default

    I've tried out the 939Dual-SATA2 on Fedora Core 5 and (I think) one of the earlier Ubuntu Dapper builds... Based on your comments, it sounds like it could potentially be a flaw with the motherboard. Had you tried the IDE driver in an alternate computer?

  3. #3
    Join Date
    Jun 2006
    Location
    Michigan
    Posts
    35

    Default

    It sounds like there is something wrong with the SATA/IDE controller on the MB. Have you tried using hdparm to enable/disable DMA/32BitI/O for the target drive? Have you tried using a controller add-on card?

  4. #4
    Join Date
    Jul 2006
    Posts
    36

    Default

    Quote Originally Posted by Michael
    I've tried out the 939Dual-SATA2 on Fedora Core 5 and (I think) one of the earlier Ubuntu Dapper builds... Based on your comments, it sounds like it could potentially be a flaw with the motherboard. Had you tried the IDE driver in an alternate computer?
    I have a server, but it's full up (and in use) as far as drives go.

  5. #5
    Join Date
    Jul 2006
    Posts
    36

    Default

    Quote Originally Posted by Patrick
    It sounds like there is something wrong with the SATA/IDE controller on the MB. Have you tried using hdparm to enable/disable DMA/32BitI/O for the target drive? Have you tried using a controller add-on card?
    I don't have any controller cards to try, and it would cost almost the same money to just replace the motherboard.

    Disabling performance features isn't the best approach (afterall, I paid big bucks for that performance).

  6. #6
    Join Date
    Jun 2006
    Location
    Michigan
    Posts
    35

    Default

    Quote Originally Posted by jsimmons
    Disabling performance features isn't the best approach (afterall, I paid big bucks for that performance).
    Have you checked that DMA is enabled? I had problems installing slackware on an older IBM until I enabled DMA for the installation drive.

  7. #7
    Join Date
    Jul 2006
    Location
    Arizona, USA
    Posts
    8

    Default

    I had an IRC chat with the developer of Kanotix not long ago, Kano. He warned me the ULI chipset isn't very compatible and doesn't behave all that well with linux, even with some of the bleeding edge stuff he's using with that distro.

  8. #8
    Join Date
    Jul 2006
    Posts
    36

    Default

    Quote Originally Posted by arcturus
    I had an IRC chat with the developer of Kanotix not long ago, Kano. He warned me the ULI chipset isn't very compatible and doesn't behave all that well with linux, even with some of the bleeding edge stuff he's using with that distro.
    The review here said that my motherboard was very Linux-compatible. Others with this motherboard have also said that. What gets me is that the live CD boots up without a single complaint, but the install won't complete... Makes no sense at all.

  9. #9

    Default

    Also, had you tried flashing the BIOS or taking any other steps?

  10. #10
    Join Date
    Jun 2006
    Location
    One day I'll reach Alaska, or die trying!
    Posts
    287

    Lightbulb Hmm...

    Dude, have you tried Xubuntu? Try the alternate install iso, as the graphical one has a glitch that prevents a complete install. If it still fails, then your PC officially doesn't want any *Buntu installed and you should look at another distro (Arch, Slax, SUSE etc.)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •