Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: SilverStone Fortress FT03

  1. #1
    Join Date
    Jan 2007
    Posts
    14,324

    Default SilverStone Fortress FT03

    Phoronix: SilverStone Fortress FT03

    Back in January at the Consumer Electronics Show one of the most interesting and innovative products I came across was not one of the many tablets or 3D monitors on display, but was actually a computer case. SilverStone Technology has been producing computer enclosures for years, yet they seem to always drive a new level of innovation into their products, and is why they're one of the few enclosure manufacturers to be featured on Phoronix. After being fascinated by their small form factor Sugo enclosures in the past, they introduced a SFF Fortress enclosure, which is easily one of the most unique micro-ATX enclosures.

    http://www.phoronix.com/vr.php?view=15891

  2. #2
    Join Date
    Jan 2010
    Location
    Portugal
    Posts
    944

    Default

    I'm probably alone in this, but I think this case is ugly as hell. Well, ok, it's not that ugly, but it has very weird proportions. The finishing looks amazing, but the fact that it is a column just doesn't work for me. It looks like a trash can. Or like a paper shredder. No, it looks like someone took one of those ugly-as-fuck-early-2000-cube Shuttle designs and extruded it upwards, making something that seems like the mutant bastard offspring of a paper shredder and the aforementioned Shuttle case. The Sugo and Fortress (except this one) lines are very nice looking. This isn't. The more I think about it the uglier it seems to get, so I better stop here.

  3. #3
    Join Date
    May 2007
    Location
    Third Rock from the Sun
    Posts
    6,582

    Default

    While I don't think it is "ugly", (I reserve that term for the "ZOMG, let's slap 10 million LEDs, a window and 5 pounds of cheap plastic front bezel that only a Decepticon could love") I agree it is not my cup of tea either. I like my cases to be HUGE with massive expansion options. Even my HTPC cases I prefer something that can handle at least 4 internal drives (preferably 6) and don't stick out like a sore thumb in a entertainment center or audio rack. My biggest problem with most of Silverstones smaller cases is that they keep using smaller diameter fans that are either noisy or need replacement frequently (or both).

  4. #4
    Join Date
    May 2007
    Location
    Third Rock from the Sun
    Posts
    6,582

    Default

    This is my idea of a nice HTPC case:

    http://www.commodoreusa.net/CUSA_Amiga2000.aspx

  5. #5
    Join Date
    Nov 2008
    Location
    Madison, WI, USA
    Posts
    862

    Default

    Quote Originally Posted by deanjo View Post
    This is my idea of a nice HTPC case:

    http://www.commodoreusa.net/CUSA_Amiga2000.aspx
    That case looks amazing, but I fear what the price is going to be if you buy it on its own. Also, while they list ATX motherboard support, I don't see mentions of mATX/mini-ITX.

    I'm planning on rebuilding my HTPC after moving this summer, and I was hoping to use a mini-ITX motherboard, possibly something Llano-based if AMD releases a 40-90w chip that will fit. A case that looks like it belongs in my A/V rack would be a good thing.

  6. #6
    Join Date
    May 2007
    Location
    Third Rock from the Sun
    Posts
    6,582

    Default

    Quote Originally Posted by Veerappan View Post
    That case looks amazing, but I fear what the price is going to be if you buy it on its own. Also, while they list ATX motherboard support, I don't see mentions of mATX/mini-ITX.
    They should work as well since they have the same hole pattern as an ATX board (just fewer mounting points on account that there is no board in those spots).

  7. #7
    Join Date
    May 2007
    Location
    Third Rock from the Sun
    Posts
    6,582

    Default

    Unfortunately they do not list a price yet on that case but as long as it falls within the price range of other high quality cases I'll be grabbing one for my new HTPC build. The fullsized ATX motherboard support is a plus as I will be needing a lot of PCI-e slots for the next HTPC build (3 Hauppauge Colossus cards, one Hauppauge HVR-2250, and a Nvidia GTX-520 totaling 5 pci-e slots). Not many good HTPC cases have that kind of expandability.

  8. #8
    Join Date
    Nov 2008
    Location
    Madison, WI, USA
    Posts
    862

    Default

    Yeah, that's a lot of expansion cards. Personally, I'd just stick with the IGP in either a Sandy Bridge or AMD system, but I will acknowledge that Nv's VDPAU implementation is nice to have. I've just usually gone for a faster CPU to compensate for lack of video decode accel in my current playback scheme. Saves me the PCI-e slot which can be filled with other stuff.

    Phenom x3 720 is plenty fast for my current playback needs, since I don't have much 1080p content to worry about.

  9. #9
    Join Date
    May 2007
    Location
    Third Rock from the Sun
    Posts
    6,582

    Default

    Quote Originally Posted by Veerappan View Post
    Yeah, that's a lot of expansion cards. Personally, I'd just stick with the IGP in either a Sandy Bridge or AMD system, but I will acknowledge that Nv's VDPAU implementation is nice to have.
    It isn't only vdpau the reason for the discreet card, cuda is being used as well for my editing software.

  10. #10
    Join Date
    Nov 2008
    Location
    Madison, WI, USA
    Posts
    862

    Default

    Ahh, that makes sense. I've only used OpenCL and haven't played with CUDA yet, but if you've got existing software that requires an Nv card to work, then you don't have much choice.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •