Results 1 to 3 of 3

Thread: Help! X1300 3D acceleration on FC7 doesn't work

  1. #1
    Join Date
    Oct 2007
    Posts
    1

    Default Help! X1300 3D acceleration on FC7 doesn't work

    Hi, all,

    I'm trying to make my 3D acceleration work. I've search for a lot of forums and articles but no one seems work.
    I'm using ATI x1300 and the driver is 8.40
    I think I've installed the driver properly by using
    ./ATI.......rpm --buildpkg Fedora/F7


    I found that I can't make the desktop effects active either, are they related to each other?


    I ran glxgears, result:

    Xlib: extension "XFree86-DRI" missing on display ":0.0".
    1611 frames in 5.3 seconds = 304.201 FPS



    ============================
    Here's my xorg.conf:

    Section "ServerLayout"
    Identifier "single head configuration"
    Screen 0 "aticonfig-Screen[0]" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"
    EndSection

    Section "Module"
    Load "dri"
    Load "glx"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" "dvorak"
    EndSection

    Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "vesa"
    EndSection

    Section "Extensions"
    Option "Composite" "false"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    Option "Capabilities" "0x00000800"
    Option "UseFastTLS" "off"
    Option "KernelModuleParm" "locked-userpages=0"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    Group "video"
    EndSection
    ======================================




    and here are some warnings in Xorg.0.log


    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (WW) fglrx(0): Option "UseFastTLS" requires an integer value
    (WW) fglrx(0): Failed to open DRM connection
    (WW) fglrx(0): No DRM connection for driver fglrx.
    (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed! *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO) *
    (WW) fglrx(0): * no 3D acceleration available *
    (WW) fglrx(0): ********************************************* *
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
    (WW) fglrx(0): Failed to set up write-combining range (0xc0000000,0x10000000)
    (WW) fglrx(0): Textured Video not supported without DRI enabled.
    (WW) fglrx(0): Option "VendorName" is not used
    (WW) fglrx(0): Option "ModelName" is not used
    (EE) AIGLX: Screen 0 is not DRI capable

    ======================
    any idea about this?


  2. #2
    Join Date
    Oct 2007
    Posts
    2

    Default

    there is no 3D support yet.
    It says that all over the forum here.

  3. #3

    Default

    Quote Originally Posted by Eveadon View Post
    there is no 3D support yet.
    It says that all over the forum here.

    There is 3D support using the closed-source fglrx driver but it currently doesn't support AIGLX until later this month.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •