Page 1 of 2 12 LastLast
Results 1 to 10 of 34

Thread: ASRock Z68 Pro3

Hybrid View

  1. #1
    Join Date
    Jan 2007
    Posts
    13,422

    Default ASRock Z68 Pro3

    Phoronix: ASRock Z68 Pro3

    We recently reviewed the ASRock H61M/U3S3 motherboard at Phoronix, which was a very nice Intel Sandy Bridge motherboard with integrated graphics for those on a limited budget. While the H61 is great on the low-end side, Intel recently introduced the Z68 chipset. The Z68 is designed to take the features of the P67 chipset and its tuning capabilities while enabling the integrated HD Graphics 3000 support. In this review, we are trying out the ASRock Z68 Pro3 motherboard.

    http://www.phoronix.com/vr.php?view=16267

  2. #2
    Join Date
    Jan 2011
    Posts
    17

    Default

    Worth noting you need to get at least bios 1.50 for stable graphics under linux with this board. Older bios had the wrong/different default voltage setting for the GPU, which causes crashes when the power saving code was enabled in the kernel - more details here https://bugzilla.kernel.org/show_bug.cgi?id=38492

  3. #3
    Join Date
    Jul 2011
    Posts
    3

    Default

    I just built a core i7 using the matx version of this board and placed an old hdd which already had ubuntu server installed. The machine boots into this ok. However, I wanted to install kubuntu 11.04 - promptly created a bootable USB key with unetbootin and kicked it off. Kubuntu seems to start up the plymouth screen, the dots flash across showing progress then the machine just shutsdown.

    Anyone seen this or experienced this with this board?

  4. #4
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    64

    Default

    Unfortunately this mainboard has problems with dual boot setups using Linux besides Windows 7-x64, warmstarts result in networking problems. Whenever I boot into Windows, the NIC goes nuts in an "em1: link up" loop after rebooting into Linux, which makes it unusable. You always have to completely shutdown the system after using Windows, otherwise you will end up without reliable networking under Linux:

    http://forums.fedoraforum.org/showth...89#post1492789

    I contacted AsRock support about the issue weeks ago but got no response yet and UEFI 1.60 didn't fix it either.

  5. #5
    Join Date
    Aug 2007
    Posts
    6,598

    Default

    Did you try a Win driver update from http://www.realtek.com.tw ? If needed you can activate wol in the driver options - or disable if active.
    Last edited by Kano; 07-30-2011 at 02:27 AM.

  6. #6
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    64

    Default

    Quote Originally Posted by Kano View Post
    Did you try a Win driver update from http://www.realtek.com.tw ?
    I was using 7.45.516.2011 and updated to 7.46.610.2011 form Realtek.com.tw right now but that didn't fix the problem.

    If needed you can activate wol in the driver options - or disable if active.
    That idea gave me hope, but with WoL deactivated in the Windows driver options, network-manager under Linux is no longer able to establish a connection with my router after a warm start (allthough ifconfig shows the NIC is present).

    I would say, this is even worse, but one may argue it doesn't matter if the network is completely unreliable or doesn't work at all. Thanks for your input Kano, but I still believe AsRock should fix their UEFI and reset the RealteK NIC properly within reboot cycles.

    BTW, I had an ASUS P8P67 with the same RTL8111E NIC before and no dual boot problems at all.
    Last edited by puntarenas; 07-30-2011 at 03:22 AM. Reason: btw...

  7. #7
    Join Date
    Jan 2011
    Posts
    17

    Default

    Quote Originally Posted by puntarenas View Post
    Unfortunately this mainboard has problems with dual boot setups using Linux besides Windows 7-x64, warmstarts result in networking problems. Whenever I boot into Windows, the NIC goes nuts in an "em1: link up" loop after rebooting into Linux, which makes it unusable. You always have to completely shutdown the system after using Windows, otherwise you will end up without reliable networking under Linux:

    http://forums.fedoraforum.org/showth...89#post1492789

    I contacted AsRock support about the issue weeks ago but got no response yet and UEFI 1.60 didn't fix it either.
    you need to use the driver from the vendor site, rather than the kernel one the in kernel 8169 doesn't work right.

    here's the one I use (same as vendor one with a minor change in the install script to work on new kernels

    http://malus.exotica.org.uk/~buzz/ub....023.00.tar.gz

  8. #8
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    64

    Default

    Quote Originally Posted by buzz View Post
    you need to use the driver from the vendor site, rather than the kernel one the in kernel 8169 doesn't work right.
    Thank you, buzz! I didn't use the one you provided now, but the one in r8168-8.024.00.tar.bz2 from Realtek.com compiled and installed fine with Fedora kernel 2.6.38.8-35.fc15.x86_64. With this driver the problem is gone, so it provides a workaround for many dual boot installations.

    On the other hand, I should not be forced to compile the vendors driver, as upstream drivers work fine as long as Windows is not involved in a reboot cycle. Using the Realtek driver also isn't an option with live media (like SysRescCD, Knoppix, or installation media e.g.) and as long as this mainboard (or the upstream kernel driver, fair enough...) doesn't properly reset the Realtek NIC on reboot, one always has to remember completely shutting down Windows before booting into any Linux with just the kernel driver availiable.

    Now I don't know who finally is to blame, AsRock or kernel developers?

  9. #9
    Join Date
    Jun 2007
    Location
    Germany
    Posts
    64

    Default

    Quote Originally Posted by puntarenas View Post
    Unfortunately this mainboard has problems with dual boot setups using Linux besides Windows 7-x64, warmstarts result in networking problems. Whenever I boot into Windows, the NIC goes nuts in an "em1: link up" loop after rebooting into Linux, which makes it unusable. You always have to completely shutdown the system after using Windows, otherwise you will end up without reliable networking under Linux:

    http://forums.fedoraforum.org/showth...89#post1492789
    Just for the record, kernel 3.1 fixed this problem (3.1.0-0.rc8.git0.0.fc16.x86_64).
    Last edited by puntarenas; 10-04-2011 at 01:19 AM.

  10. #10
    Join Date
    Dec 2008
    Posts
    12

    Default unable to unstall k/ubuntu 11.10

    I'm having no luck installing Kubuntu 11.10 64-bit.. also tried and failed with Ubuntu 11.10 64-bit (32 bit is downloading now for the next try).

    Have upgraded the BIOS to 1.60 (latest on the Asrock site)...

    Attempting to install via USB stick.

    Under Ubuntu, I use F11 to select the USB stick for boot... see the Ubuntu installer menu, hit Enter to boot.. see some of the boot log scroll by.. last thing I see is
    Code:
    saned disabled: edit /etc/default/saned
    then the screen goes black, and a short time later I see what looks like a QVGA garbage image, scaled up to 1080p.. ie. a very blocky garbage image, mostly white, with some blue & red mixed in.. I don't seem to get anywhere past that.

    I've run memtest and all looks good there.

    Just to be sure.. this is the board: http://www.newegg.com/Product/Produc...82E16813157251

    EDIT: Kubuntu from burned DVD also fails.. funky screen right after trying to start CUPS.
    Last edited by zim2dive; 10-23-2011 at 07:28 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •