Does anybody else have a same problem by using openSUSE 10.3 and some ati hd series card and after installing the driver(8.41.7) using Yast or console and have everything(packages) in your system that you need and after reboot your screen is totally black even if you try to use failsafe or non x.
driver-install bombed, totally, without saying anything about it.
So, as usual with the ATI drivers, for ME, anyways, I had to do the
/bin/cp fglrx.ko \
( that's actually a cut-n-paste from my system's /etc/rc.d/halt.local
I HAD to do that, or the damn thing would black-screen every time the kernel got updated, and I've got it set so the updates are completely automatic, so the ATI refresh had to become completely automatic, too! )
Try the sequence, and see if it fixes things. . .
oh, yeah, it's gotta be done as root, eh?
and that `uname -r` bit is just to get the current concept of the kernel, is all. . .
dang, I just realized it'd require a double-reboot to get the system up properly, after a kernel-update:
once to get into the new kernel, then a shutdown from there to get my graphics-refresh. . . baH!!
Hmm, maybe I should have it done in boot.local, then?
( yeah, it's an ugly hack, but it works. )
Yes in root: sh ./install_package i install it, and black screen i mean that when i boot computer on, its stop situation where i have totally black screen and nothing happens even i have waite 10 min.
And i have gcc, make, kernel source, jne.
And installation goes correctly aticonfig ..., sax2, but after boot stops on totally black screen, that i mean in this situation.
when I installed the fglrx driver for hd2400, the install SEEMED to have worked, but
on reboot, the graphics of the boot-process zoomed by, then when it TRIED to go into X, the screen went black.
It didn't matter how long I waited, it didn't matter how many times I re-booted the machine, it was the same again and again:
If you add the boot-paramater of 2
( add " 2" to the boot-command line, without the quotes, of course )
you can probably get the machine to boot into text-mode, no-X, no-network.
Once you do that, login as root, and type
lsmod | grep fglrx
this will list the kernel-modules ( lsmod ), and
show you any with "fglrx" in their name.
I bet that there ISN'T one loaded, and that that is the problem.
That is why the build-script, the copy, and the depmod, I listed above.
IF there isn't a fglrx kernel-module that matches the current kernel, it can't be loaded, and therefore X will be useless
( unless /etc/X11/xorg.conf does *not* reference fglrx. . . -- in which case its non-existence should not matter )
Yes, i`m using 126.96.36.199.... kernel, but i can`t get log in even in text mode, even do i did clear the bios and it make little flash on the beginning when i boot on, but darm after 5 reboot/boot and ~20-30min wait it stucked on the black screen, hmm well i will try to another 10.3 in wmware and get the xorg-file so i and we or somebody can tell/help more/better
What caused the black screen of death for me was this: the installer left the original system file /usr/lib/libGL.so.1.2 and installed it's own as /usr/X11R6/lib/libGL.so.1.2Code:init 3
IIRC this didn't happen to me on OpenSuSE 10.2, but anyway you should check to see if there are two GL libs.
If it exists, the one you want to move out of the way is:
I'm still using 8.40.4, so I don't know if that's the issue in your case with 8.41.xCode:391344 2007-09-21 21:34 libGL.so.1.2
check ur x.org, frequency for the display, its bugged on my CF 2900 XT
i had to correct it myself, and remove a driver and 1 monitor, it didnt delete the stuff from the vesa driver. so i had 2 configurations in one x.org aswell, stole the display settings from the monitor section from the previous driver, voila, worked for me.
And i had a issue in 64 bit, strange one, i wrote my username: atkins "enter"
Password : xxxxxxxxxxxx "enter"
took 10 seconds, got display, only vesa again >_<
but got it working again afer lots of tickering, but, couldnt find out what made it work, was to angry to controll myself.
Assuming you use init 3 from the grub boot screen and are able to login, and the problem is you're unable to get the fglrx module to build, you need this patch:
Edit:[Forgot to state build command]Code:--- /usr/src/linux/scripts/mod/modpost.c 2007-10-08 07:31:40.000000000 -0400 +++ /usr/src/linux/scripts/mod/modpost.c 2007-10-20 04:12:23.000000000 -0400 @@ -1345,8 +1345,8 @@ static void check_exports(struct module basename++; else basename = mod->name; - if (!mod->gpl_compatible) - check_for_gpl_usage(exp->export, basename, exp->name); +/* if (!mod->gpl_compatible) + check_for_gpl_usage(exp->export, basename, exp->name);*/ check_for_unused(exp->export, basename, exp->name); } }
Copy the above code to /tmp/ naming it modpost.c.diff. Following that, you build the new modpost:
Then you would need to copy the new modpost from that location to the modular kernel source, for example:Code:cd /usr/src cat /tmp/modpost.c.diff | patch -p0 cd /usr/src/linux/scripts/mod gcc -o modpost modpost.c file2alias.c sumversion.c
That's the patch I used to get 8.40.4 to build. Anyway, it may still be needed for 8.41.7 (I don't recall).Code:cd /usr/src/linux-188.8.131.52-0.4-obj/i386/default/scripts/mod mv ./modpost ./modpost.old cp /usr/src/linux/scripts/mod/modpost ./
Last edited by edged; 10-23-2007 at 08:40 AM.
thanks, i`ll try that, and thank you all for youre good answers