I think proper power management still depends on having the AMD proprietary driver installed.
If you want, you can dump your DSDT and peek inside after disassembling it with iasl -d. There you can check if the voltages are determined by the BIOS correctly or not.
Ok, I just did that. I'm not seeing which section would contain the voltages
bunch of those, so if that's what I think it is, then it's not being set right ....
Last edited by Soul_keeper; 10-23-2011 at 07:07 AM.
My temp readings were wrong
I got my /etc/sensors3.conf dialed in:
Adapter: PCI adapter
Cpu: +32.0°C (high = +95.0°C)
(crit = +95.0°C, hyst = +94.0°C)
Adapter: ISA adapter
Vcore: +1.18 V (min = +0.90 V, max = +1.26 V)
+12V: +12.29 V (min = +10.85 V, max = +13.82 V)
AVCC: +3.39 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.38 V (min = +2.98 V, max = +3.63 V)
+5V: +5.04 V (min = +4.52 V, max = +5.52 V)
3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.46 V)
Case Fan: 1336 RPM (min = 600 RPM)
CPU Fan: 1569 RPM (min = 600 RPM)
CPU: +32.0°C (high = +55.0°C, hyst = +35.0°C) sensor = thermistor
MB: +29.0°C (high = +50.0°C, hyst = +30.0°C) sensor = thermistor