Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Tweaks To Extend The Battery Life Of Intel Linux Notebooks

  1. #11
    Join Date
    Jul 2007
    Posts
    403

    Default

    As /etc/default/grub is referenced by the GRUB manual, I must assume that distros that don't use it are the "outsiders".
    That's the manual for GRUB2, which is pretty significantly different from GRUB, which is what many of us are still running.

  2. #12
    Join Date
    Feb 2008
    Posts
    154

    Default

    Thank you for the article, but I would have liked to have seen how using these power saving options compares to using previous versions of the kernel. If it reduces power to the same level as earlier versions then there would be no reason to avoid upgrading kernels.

  3. #13
    Join Date
    Jan 2008
    Location
    South Africa
    Posts
    228

    Default

    ok, Back to the topic!

    I tested all those options on an Acer Aspire One Happy (Atom N450, 2GB ram), using Kernel 3.0.1

    i915.i915_enable_rc6=1
    No effect at all. I suspect this is only for the Core i series of processors.

    pcie_aspm=force
    No effect. I think no peripherals are connected using the PCIe bus.

    i915.i915_enable_fbc=1
    Works. Actually improved performance a bit.

    i915.lvds_downclock=1
    Works quite well, probably because of the low resolution screen? (1024x600)

    The last 2 options together, saved me about 10% power consumption in pure idle, and it seems to carry over on a lightly loaded system.
    So, ATOM users are not completely left out to dry with these options either :-)

  4. #14
    Join Date
    Jan 2009
    Posts
    515

    Default

    Does this only works with newer kernels? or is it only driver dependent?
    Would this work with Debian stable?

  5. #15
    Join Date
    Jan 2008
    Location
    South Africa
    Posts
    228

    Default

    i915.i915_enable_fbc=1
    Has been around for a very long while. Intel driver specific.
    i915.lvds_downclock=1
    Has been around for a very long while. Intel driver specific. Only works on systems that has lvds displays (typically notebooks only)

    915.i915_enable_rc6=1
    Is new, and very gpu specific. Intel Core i<somethingmeaningless>

    pcie_aspm=force
    Is only needed from 2.6.38 onwards, but works on any system.

  6. #16
    Join Date
    Aug 2011
    Posts
    1

    Question

    i'm running an Arrandale Acer Travelmate 8172T i3-330UM laptop.

    i have been wondering if there's a way to influence fan trippoints on this machine. my regular idling temperatures with no tweaks have been 45/37 for two cores, that's when machine is dead quiet and just how i like it. but as soon as temperature crosses 47C, and that's pretty much with doing anything that changes anything on the screen, audible fan comes immediately on. so far i haven't found a way to do anything about it, haven't had the time either to learn more about modifying DSDT, to see if that's an option here at all. hints welcome btw.

    back to topic. enabled all three options (+ pcie_aspm=force) and first apparent effect is that my idle temps rose by about 7C. even with machine sitting totally idle, temps would hover around 53-54C, instead of the earlier 46+.

    now i only have pcie_aspm=force + i915_enable_rc6=1. idle temps seem to hover around 50C now, will have to do further monitoring, whether they will drop down to previous levels when the machine is completely idle instead of me typing in this firefox javascripted forum.

    Code:
    $ uname -a
    Linux travelmate 3.0.2-pf #4 SMP PREEMPT Fri Aug 26 12:39:19 EEST 2011 i686 Intel(R) Core(TM) i3 CPU U 330 @ 1.20GHz GenuineIntel GNU/Linux
    Code:
    $ sudo grep -H '' /sys/module/i915/parameters/*
    /sys/module/i915/parameters/fbpercrtc:0
    /sys/module/i915/parameters/i915_enable_fbc:0
    /sys/module/i915/parameters/i915_enable_rc6:1
    /sys/module/i915/parameters/lvds_downclock:0
    /sys/module/i915/parameters/lvds_use_ssc:1
    /sys/module/i915/parameters/modeset:-1
    /sys/module/i915/parameters/panel_ignore_lid:0
    /sys/module/i915/parameters/powersave:1
    /sys/module/i915/parameters/reset:Y
    /sys/module/i915/parameters/semaphores:0
    /sys/module/i915/parameters/vbt_sdvo_panel_type:-1
    there's another parameter - powersave. does that have anything to do with anything here?

    Code:
    $ sensors
    acpitz-virtual-0
    Adapter: Virtual device
    temp1:         +6.8C  (crit = +100.0C)
    temp2:         +5.8C  (crit = +119.8C)
    
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0:       +44.0C  (high = +95.0C, crit = +105.0C)
    Core 2:       +50.0C  (high = +95.0C, crit = +105.0C)
    i have no idea what the acpitz temperatures are. https://bugzilla.kernel.org/show_bug.cgi?id=41612 hints welcome.

    so far it seems on this laptop these tweaks have an opposite effect on power consumption.
    Last edited by lkraav; 08-26-2011 at 07:54 AM.

  7. #17
    Join Date
    Aug 2011
    Posts
    2

    Default Caused problems on Thinkpad X200s with Ubuntu Lucid

    I'm running 64-bit Lucid on a Thinkpad X200s. When at "home base" this in a dual head configuration: X200 UltraBase/DisplayPort-to-DVI-D adapter/Dell 20-inch 1600x1200 panel. I tried the enable_fbc and lvds_downclock options.

    enable_fbc does not seem to be supported by the i915 version in Lucid:

    Code:
    parm:           modeset:int
    parm:           fbpercrtc:int
    parm:           powersave:int
    parm:           lvds_downclock:int
    and adding it to /etc/modprobe.d/foo.conf options led to the module not loading, which in turn broke both displays: wrong resolution on both plymouth and gdm. In fact I could not see gdm. Not sure if it was not there at all or "displayed" with an offset that made it not visible on the screen.

    Enabling only lvds_downclock still resuts in major problems with my system: Again, plymouth looks wrong (including barely visible cryptsetup prompt) and gdm is not shown. Furthermore, now attempting to ctrl-alt-F1 to get to a console results in a corrupt "rainbow" pattern on the bottom left of both screens, or just the laptop panel if the machine is booted with the Dell display switched off, instead of the console.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •