fglrx 8.42.3 dual-head clone different resolutions

[Dottout]

hi, Id like to know how to set up dual head in clone mode with different res, since at the moment the big desktop sucks and using right\left of will disable compiz. in aticonfig --help I read:
--dtop, --desktop-setup=STRING
clone 2 screens - same content, allows for different refresh rates/resolutions

but how to set different res? I tried with --mode2=W1xH1,W2XH2,W3xH3,...
but it didnt work, it doesnt modify my xorg.conf
any idea?

[kikislater]

Hello,

I'm french and I have the same problem.
Can someone help us ?

Thanks

[kikislater]

The current config work fine :

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
#	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	Identifier	"Clone Mode"
#	Screen	    1  "L22-1W" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
#	InputDevice    "Synaptics Touchpad"
	InputDevice    "Touchpad"
	Option "AIGLX" "true"
EndSection

Section "Files"
EndSection

Section "Module"
#	Load	"Synaptics"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "oss"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
#	Identifier  "Synaptics Touchpad"
	Identifier  "Touchpad"
	Driver	    "Mouse"
	Option	    "CorePointer"
#	Driver      "synaptics"
#	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/gpmdata"
#	Option	    "Device" "/dev/psaux"
#	Option	    "Protocol" "auto-dev"
	Option	    "Protocol" "GlidePointPS/2"
	Option	    "ZAxisMapping" "4 5"
#	Option	    "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

#Section "Monitor"
#	Identifier   "L22-1W"
#	HorizSync    30.0 - 82.0
#	VertRefresh  50.0 - 75.0
#	Option	    "DPMS"
#EndSection

Section "Device"
	Identifier  "0 ATI Mobility Radeon HD 2300"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option "HSync2"	"30.0 - 82.0"
	Option "VRefresh2"	"50.0 - 75.0"
	Option "DesktopSetup"	"clone"
	Option	    "Mode2" "1680x1050"
#	Option	    "MetaModes" "1280x800, 1680x1050"
EndSection

#Section "Device"
#	Identifier  "1 ATI Mobility Radeon HD 2300"
#	Driver      "fglrx"
#	Option	    "VideoOverlay" "on"
#	Option	    "OpenGLOverlay" "off"
#	Option	    "MetaModes" "1680x1050, 1280x800; 1280x800, 1280x800"
#EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "0 ATI Mobility Radeon HD 2300"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes      "1280x800" "1680x1050"
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "enable"
EndSection

[Dottout]

first I tried to edit my conf and no way. then, to avoid typo and whatever I copied anything related to screen\monitor\device from your config, and I still dont have 2 different resolutions. here my conf:

Section "ServerLayout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        Identifier      "Clone Mode"

        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "TouchPad" "AlwaysCore"
        InputDevice    "Keyboard1" "CoreKeyboard"
        Option  "aiglx" "true"
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "InputDevice"
        Identifier  "TouchPad"
        Driver      "synaptics"
        Option      "Device" "/dev/input/mouse0"
        Option      "Protocol" "auto-dev"
        Option      "LeftEdge" "1700"
        Option      "RightEdge" "5300"
        Option      "TopEdge" "1700"
        Option      "BottomEdge" "4200"
        Option      "FingerLow" "25"
        Option      "FingerHigh" "30"
        Option      "MaxTapTime" "180"
        Option      "MaxTapMove" "220"
        Option      "VertScrollDelta" "100"
        Option      "MinSpeed" "0.09"
        Option      "MaxSpeed" "0.18"
        Option      "AccelFactor" "0.0015"
        Option      "SHMConfig" "on"
EndSection

Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option      "AutoRepeat" "500 30"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "it"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2" # PS/2 Mouse
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5 6 7"
        Option      "Emulate3Buttons"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "0 ATI Mobility Radeon HD 2300"
        Driver      "fglrx"
        Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
        Option "HSync2" "30.0 - 82.0"
        Option "VRefresh2"      "50.0 - 75.0"
        Option "DesktopSetup"   "clone"
        Option      "Mode2" "1680x1050"
#       Option      "MetaModes" "1280x800, 1680x1050"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "0 ATI Mobility Radeon HD 2300"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes      "1280x800" "1680x1050"
        EndSubSection
EndSection
Section "DRI"
        Mode         0666
EndSection

Section "Extensions"
        Option      "Composite" "enable"
EndSection

am I doing something wrong?