Tweet
I have a modesetting issue on an AMD A6-3500 system running Fedora Rawhide. The system is going up to a point when it should switch screen mode and then the monitor will just suspend (my monitor is connected to the VGA output).
The dmesg logs:
Even the latest of the Rawhide kernels is not helping much:
What should I do to fix it and get the VGA output to work?
The dmesg logs:
Code:
[root@box ~]# uname -a Linux haskaa 3.2.0-0.rc4.git1.4.fc17.x86_64 #1 SMP Fri Dec 2 21:36:13 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux [root@box ~]# dmesg|grep drm [ 6.052439] [drm] Initialized drm 1.1.0 20060810 [ 6.076348] [drm] radeon defaulting to kernel modesetting. [ 6.076414] [drm] radeon kernel modesetting enabled. [ 6.080878] [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x1849:0x9640). [ 6.081204] [drm] register mmio base: 0xFEB00000 [ 6.081265] [drm] register mmio size: 262144 [ 6.082688] [drm] Detected VRAM RAM=256M, BAR=256M [ 6.082692] [drm] RAM width 32bits DDR [ 6.084477] [drm] radeon: 256M of VRAM memory ready [ 6.084560] [drm] radeon: 512M of GTT memory ready. [ 6.085170] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.085233] [drm] Driver supports precise vblank timestamp query. [ 6.085948] [drm] radeon: irq initialized. [ 6.086071] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.088179] [drm] Loading SUMO Microcode [ 6.180555] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 6.204560] [drm] ring test succeeded in 0 usecs [ 6.214555] [drm] radeon: ib pool ready. [ 6.216686] [drm] ib test succeeded in 0 usecs [ 6.235112] [drm] Radeon Display Connectors [ 6.235175] [drm] Connector 0: [ 6.235232] [drm] HDMI-A [ 6.235289] [drm] HPD2 [ 6.235347] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 6.235435] [drm] Encoders: [ 6.235492] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.235551] [drm] Connector 1: [ 6.235608] [drm] VGA [ 6.235664] [drm] HPD1 [ 6.235721] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 6.235809] [drm] Encoders: [ 6.235865] [drm] CRT1: INTERNAL_UNIPHY2 [ 6.235924] [drm] CRT1: NUTMEG [ 6.253656] [drm] Internal thermal controller without fan control [ 6.254856] [drm] radeon: power management initialized [ 6.380043] [drm] fb mappable at 0xC0142000 [ 6.380100] [drm] vram apper at 0xC0000000 [ 6.380153] [drm] size 3145728 [ 6.380204] [drm] fb depth is 24 [ 6.380255] [drm] pitch is 4096 [ 6.382025] fbcon: radeondrmfb (fb0) is primary device [ 11.402013] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 11.402018] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E262 (len 2585, WS 4, PS 4) @ 0xE94C [ 11.471659] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery reached max voltage [ 11.471664] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed [ 11.484390] fb0: radeondrmfb frame buffer device [ 11.484392] drm: registered panic notifier [ 11.484455] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0 [root@box ~]#
Code:
[root@haskaa ~]# uname -a Linux haskaa 3.2.0-0.rc7.git0.1.fc17.x86_64 #1 SMP Sat Dec 24 15:25:57 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux [root@haskaa ~]# [root@haskaa ~]# dmesg|grep drm [ 6.020408] [drm] Initialized drm 1.1.0 20060810 [ 6.045183] [drm] radeon defaulting to kernel modesetting. [ 6.045188] [drm] radeon kernel modesetting enabled. [ 6.053622] [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x1849:0x9640). [ 6.053855] [drm] register mmio base: 0xFEB00000 [ 6.053858] [drm] register mmio size: 262144 [ 6.057847] [drm] Detected VRAM RAM=256M, BAR=256M [ 6.057852] [drm] RAM width 32bits DDR [ 6.063598] [drm] radeon: 256M of VRAM memory ready [ 6.063616] [drm] radeon: 512M of GTT memory ready. [ 6.065392] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.065395] [drm] Driver supports precise vblank timestamp query. [ 6.065975] [drm] radeon: irq initialized. [ 6.066107] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.071234] [drm] Loading SUMO Microcode [ 6.148864] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 6.170233] [drm] ring test succeeded in 0 usecs [ 6.179796] [drm] radeon: ib pool ready. [ 6.184633] [drm] ib test succeeded in 0 usecs [ 6.203821] [drm] Radeon Display Connectors [ 6.203829] [drm] Connector 0: [ 6.203834] [drm] HDMI-A [ 6.203839] [drm] HPD2 [ 6.203846] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 6.203851] [drm] Encoders: [ 6.203855] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.203860] [drm] Connector 1: [ 6.203863] [drm] VGA [ 6.203867] [drm] HPD1 [ 6.203872] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 6.203877] [drm] Encoders: [ 6.203881] [drm] CRT1: INTERNAL_UNIPHY2 [ 6.203885] [drm] CRT1: NUTMEG [ 6.222935] [drm] Internal thermal controller without fan control [ 6.224028] [drm] radeon: power management initialized [ 6.349303] [drm] fb mappable at 0xC0142000 [ 6.349307] [drm] vram apper at 0xC0000000 [ 6.349308] [drm] size 3145728 [ 6.349310] [drm] fb depth is 24 [ 6.349311] [drm] pitch is 4096 [ 6.350737] fbcon: radeondrmfb (fb0) is primary device [ 11.369014] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 11.369018] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E262 (len 2585, WS 4, PS 4) @ 0xE94C [ 11.434310] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery reached max voltage [ 11.434314] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed [ 11.446820] fb0: radeondrmfb frame buffer device [ 11.446822] drm: registered panic notifier [ 11.446884] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
Code:
[root@haskaa ~]# lspci|grep VGA 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 964a [root@haskaa ~]#
Comment