Results 1 to 2 of 2

Thread: External HDMI monitor not detected with ATI mobility Radeon on ubuntu 11.10 64 bit.

  1. #1

    Default External HDMI monitor not detected with ATI mobility Radeon on ubuntu 11.10 64 bit.

    I need some help, please. I use an ATI Mobility Radeon HD 6370 with proprietary drivers v11.8 in Ubuntu 11.10 64 bit and I can't get it to detect an external monitor through HDMI. Not with the Catalyst software nor with the "Displays" utility. I just want to set up a simple and straight forward clone display configuration to see my laptop output on my HD TV monitor. I can do this without any trouble in Windows 7 (same machine, dual boot) so I know there's nothing wrong with my hardware (laptop, cable or TV monitor).

    I'm not sure what is going wrong here, but if it has anything to do with this, I can tell you that I have an xorg.conf file generated by

    Code:
     sudo aticonfig -f --initial
    and it is exactly the following:

    Code:
    Section "ServerLayout"
    	Identifier     "aticonfig Layout"
    	Screen      0  "aticonfig-Screen[0]-0" 0 0
    EndSection
    
    Section "Module"
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[0]-0"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[0]-0"
    	Driver      "fglrx"
    	BusID       "PCI:1:5:0"
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[0]-0"
    	Device     "aticonfig-Device[0]-0"
    	Monitor    "aticonfig-Monitor[0]-0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    So, is there something I should add in there to make Catalyst detect my monitor? Or has it got nothing to do with it?

    This is actually driving me insane. Ive spent a whole day trying to work this around without much success. I did find out, however that if I run
    Code:
    aticonfig --lsa
    I get the following output
    Code:
    * 0. 01:05.0 ATI Mobility Radeon HD 4200 Series
      1. 02:00.0 AMD Radeon HD 6300M Series
    Apparently there are two adapters detected. The information section in the Catalyst GUI confirms this, however, the display manager only lists the 4200 adapter.
    I thought I could sort this out with a new xorg.conf file generated by aticonfig --initial -f --adapter=all but that only resulted in X server failing to load at startup. I only got it working again by restoring the previous configuration.

    All help is appreciated.

  2. #2

    Default

    Bump, bump

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •