R600 Gallium3D Getting Close On OpenGL 3.3 Support

[entropy]

Both 3D and rotation are working. You just have to use glamor and a pre-1.13 xserver at the moment until the issues with xserver 1.13 are sorted out.

Does it work with zaphod configurations now?

[rrohbeck]

Both 3D and rotation are working. You just have to use glamor and a pre-1.13 xserver at the moment until the issues with xserver 1.13 are sorted out.

I just rebuilt everything and it still doesn't work for me.
Could somebody check what I'm doing wrong?
xorg.conf.d: http://pastebin.com/7yzcnFtT
Xorg.0.log: http://pastebin.com/AepK2XDq
build_radeonsi.sh: http://pastebin.com/HZGhh0fq

Basically what I do is (some of this may be redundant but I never checked what exactly I need):
Download/build/install 3.8 kernel from git://people.freedesktop.org/~airlied/linux origin/drm-next branch
Download/build/install LLVM from git://people.freedesktop.org/~tstellar/llvm
Download/build/install entire stack with git://anongit.freedesktop.org/git/xorg/util/modular util/modular
Download/build/install xorg-server-1.11.4 from tarball with --enable-glx-tls --enable-xorg --disable-dmx --disable-xvfb --disable-xnest --disable-xwin
Download/build/install git://anongit.freedesktop.org/git/xorg/driver/xf86-video-ati with --enable-gallium-radeon --with-egl-platforms=x11,drm --enable-glamor
Download/build/install git://anongit.freedesktop.org/mesa/mesa with --with-dri-driverdir=$PREFIX/lib/dri --with-egl-platforms=x11,drm --with-gallium-drivers=swrast,r300,r600,radeonsi --enable-gbm --enable-shared-glapi --enable-glx-tls --with-dri-drivers=radeon
Download/build/install git://anongit.freedesktop.org/git/mesa/drm
Download/build/install git://anongit.freedesktop.org/git/xorg/driver/glamor with --enable-glx-tls

kdmrc has
ServerCmd=/opt/xorg/bin/X -verbose 9 -logverbose 9 -configdir /opt/xorg/share/X11/xorg.conf.d

and I'm still getting
[ 1169.968] (WW) RADEON(0): Direct rendering disabled
[ 1169.968] (II) RADEON(0): Acceleration disabled

[rrohbeck]

P.S. LLVM settings are
./configure --prefix=/usr/local --enable-experimental-targets=R600 --enable-optimized --cache-file=/dev/null --srcdir=.

[MrCooper]

[ 1169.968] (II) RADEON(0): Acceleration disabled

Looks like it's not picking up Option "AccelMethod" "glamor". I think maybe the xorg.conf.d/ snippets must be named *.conf, or it might be easier to just put it in /etc/X11/xorg.conf.

BTW, this sort of problem report should rather go to a relevant mailing list.

[Veerappan]

I just rebuilt everything and it still doesn't work for me.
Could somebody check what I'm doing wrong?
xorg.conf.d: http://pastebin.com/7yzcnFtT
Xorg.0.log: http://pastebin.com/AepK2XDq
build_radeonsi.sh: http://pastebin.com/HZGhh0fq

Basically what I do is (some of this may be redundant but I never checked what exactly I need):
Download/build/install 3.8 kernel from git://people.freedesktop.org/~airlied/linux origin/drm-next branch
Download/build/install LLVM from git://people.freedesktop.org/~tstellar/llvm
Download/build/install entire stack with git://anongit.freedesktop.org/git/xorg/util/modular util/modular
Download/build/install xorg-server-1.11.4 from tarball with --enable-glx-tls --enable-xorg --disable-dmx --disable-xvfb --disable-xnest --disable-xwin
Download/build/install git://anongit.freedesktop.org/git/xorg/driver/xf86-video-ati with --enable-gallium-radeon --with-egl-platforms=x11,drm --enable-glamor
Download/build/install git://anongit.freedesktop.org/mesa/mesa with --with-dri-driverdir=$PREFIX/lib/dri --with-egl-platforms=x11,drm --with-gallium-drivers=swrast,r300,r600,radeonsi --enable-gbm --enable-shared-glapi --enable-glx-tls --with-dri-drivers=radeon
Download/build/install git://anongit.freedesktop.org/git/mesa/drm
Download/build/install git://anongit.freedesktop.org/git/xorg/driver/glamor with --enable-glx-tls

kdmrc has
ServerCmd=/opt/xorg/bin/X -verbose 9 -logverbose 9 -configdir /opt/xorg/share/X11/xorg.conf.d

and I'm still getting
[ 1169.968] (WW) RADEON(0): Direct rendering disabled
[ 1169.968] (II) RADEON(0): Acceleration disabled

IIRC: You need to rebuild mesa with the --enable-glx-tls and the other options BEFORE you build xf86-video-ati. When I've seen glamor guides in the past, they basically recommended MESA -> GLAMOR -> xf86-video-ati. The xf86-video-ati configure log might also be useful here.

[rrohbeck]

IIRC: You need to rebuild mesa with the --enable-glx-tls and the other options BEFORE you build xf86-video-ati. When I've seen glamor guides in the past, they basically recommended MESA -> GLAMOR -> xf86-video-ati. The xf86-video-ati configure log might also be useful here.

That didn't change anything. But maybe the new fglrx will work for me, I'll try it now.

[agd5f]

That didn't change anything. But maybe the new fglrx will work for me, I'll try it now.

Have you fixed your configuration so that the accelmethod option is actually picked up by the xserver?

Option "AccelMethod" "glamor"

[rrohbeck]

Have you fixed your configuration so that the accelmethod option is actually picked up by the xserver?

Option "AccelMethod" "glamor"

Yes, the current Device section is
/opt/xorg/share/X11/xorg.conf.d/50-Device:Section "Device"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Identifier "HD7850"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Driver "ati"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "AccelMethod" "glamor"
/opt/xorg/share/X11/xorg.conf.d/50-Device: BusID "PCI:6:0:0"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-HDMI-0" "S273HL1"
/opt/xorg/share/X11/xorg.conf.d/50-Device:# Option "Monitor-DVI-1" "S273HL2"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DVI-0" "Shimian"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-0" "QNIX1"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-1" "QNIX2"
/opt/xorg/share/X11/xorg.conf.d/50-Device:EndSection

[rrohbeck]

Yes, the current Device section is
/opt/xorg/share/X11/xorg.conf.d/50-Device:Section "Device"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Identifier "HD7850"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Driver "ati"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "AccelMethod" "glamor"
/opt/xorg/share/X11/xorg.conf.d/50-Device: BusID "PCI:6:0:0"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-HDMI-0" "S273HL1"
/opt/xorg/share/X11/xorg.conf.d/50-Device:# Option "Monitor-DVI-1" "S273HL2"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DVI-0" "Shimian"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-0" "QNIX1"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-1" "QNIX2"
/opt/xorg/share/X11/xorg.conf.d/50-Device:EndSection

I uploaded the latest xorg.conf.d to http://pastebin.com/hFMbKNWK

[agd5f]

Yes, the current Device section is
/opt/xorg/share/X11/xorg.conf.d/50-Device:Section "Device"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Identifier "HD7850"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Driver "ati"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "AccelMethod" "glamor"
/opt/xorg/share/X11/xorg.conf.d/50-Device: BusID "PCI:6:0:0"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-HDMI-0" "S273HL1"
/opt/xorg/share/X11/xorg.conf.d/50-Device:# Option "Monitor-DVI-1" "S273HL2"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DVI-0" "Shimian"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-0" "QNIX1"
/opt/xorg/share/X11/xorg.conf.d/50-Device: Option "Monitor-DisplayPort-1" "QNIX2"
/opt/xorg/share/X11/xorg.conf.d/50-Device:EndSection

Is it actually getting picked up by the xserver however? Previously it was not. Can you post your xorg log? It would be easier to track all of this if you opened a bug:
https://bugs.freedesktop.org