Page 9 of 9 FirstFirst ... 789
Results 81 to 89 of 89

Thread: How To Setup Radeon DPM On Ubuntu Linux

  1. #81
    Join Date
    Jan 2013
    Posts
    966

    Default

    Quote Originally Posted by Ibidem View Post
    Code:
    radeon.dpm=1
    may not work with a Debian stock kernel--or any kernel that uses radeon built as a module, unless there's some special magic in your init version.
    Code:
    ghost@linux:~$ cat /boot/config-3.11-6.dmz.1-liquorix-amd64 |grep -i drm_radeon
    CONFIG_DRM_RADEON=m
    # CONFIG_DRM_RADEON_UMS is not set
    ghost@linux:~$ dmesg|grep -i radeon|grep -i dpm
    [drm] radeon: dpm initialized
    ghost@linux:~$ cat /boot/grub/grub.cfg |grep radeon.dpm
    	linux	/boot/vmlinuz-3.11-6.dmz.1-liquorix-amd64 root=UUID=9ae35c45-c420-43e0-bf40-1dbe3f6882e6 ro quiet radeon.dpm=1
    This is standard Debian Testing.

  2. #82

    Default

    Quote Originally Posted by Ibidem View Post
    Code:
    radeon.dpm=1
    may not work with a Debian stock kernel--or any kernel that uses radeon built as a module, unless there's some special magic in your init version.

    Code:
    module.parameter=value
    is only for builtin modules, to the best of my knowledge.
    So you would need to do something like:
    Code:
    echo "options radeon dpm=1">>/etc/modprobe.d/radeon.conf
    If you want a lower clock, see if you can use the "battery" state.
    Radeon is almost always built as a module and dpm works with the Debian stock kernels and it should work in any circumstances if radeon.dpm=1 is passed to the kernel boot options.

    This is the relevant line in dmesg to see if dpm is actually activated:

    Code:
    [    7.075704] [drm] radeon: dpm initialized
    You can see it with the following command:
    Code:
    dmesg | grep " dpm "
    BTW there is the clock utility on the other thread here, you should try it.

  3. #83
    Join Date
    Jan 2013
    Posts
    966

    Default

    Quote Originally Posted by gradinaruvasile View Post
    .....
    Say,.. why do you have a habit of answering exactly the same post, at exactly the same time with almost identical answer D

  4. #84
    Join Date
    Jan 2014
    Posts
    5

    Wink effective power management with DPM?

    I have a question concerning this DPM thing:
    I think I managed to set everything up correctly on my 3.12.6 kernel (at least, so it seems).
    I have a RV710 in my laptop (mobile radeon 4570)
    DPM talks about 7 different profiles..
    but when I switch from battery - balanced - performance using this command:
    Code:
    echo (profile) > /sys/class/drm/card0/device/power_dpm_state
    and monitor the frequency information with this tool:
    Code:
    while(true) do sleep 5; cat /sys/kernel/debug/dri/64/radeon_pm_info; done
    I see no difference at all; I tried:
    - doing nothing in KDE
    - doing nothing in XFCE
    - running glxgears
    - decoding a h264 movie using mplayer and vdpau

    and for every profile, I came to the conclusion: the max performance is 680mhz core and 500mhz memory, and minimal is 220 mhz core and 250 mhz memory
    test was done on AC power

    dpm output:
    Code:
    [    2.667173] == power state 0 ==
    [    2.667175]  ui class: none
    [    2.667178]  internal class: boot 
    [    2.667180]  caps: video 
    [    2.667182]  uvd    vclk: 0 dclk: 0
    [    2.667185]          power level 0    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667186]          power level 1    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667188]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667189]  status: c r b 
    [    2.667191] == power state 1 ==
    [    2.667192]  ui class: performance
    [    2.667194]  internal class: none
    [    2.667195]  caps: single_disp video 
    [    2.667198]  uvd    vclk: 0 dclk: 0
    [    2.667199]          power level 0    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667201]          power level 1    sclk: 30000 mclk: 50000 vddc: 950
    [    2.667202]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667203]  status: 
    [    2.667205] == power state 2 ==
    [    2.667206]  ui class: battery
    [    2.667207]  internal class: none
    [    2.667208]  caps: single_disp video 
    [    2.667210]  uvd    vclk: 0 dclk: 0
    [    2.667212]          power level 0    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667214]          power level 1    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667215]          power level 2    sclk: 30000 mclk: 25000 vddc: 950
    [    2.667216]  status: 
    [    2.667218] == power state 3 ==
    [    2.667219]  ui class: none
    [    2.667220]  internal class: uvd 
    [    2.667222]  caps: video 
    [    2.667224]  uvd    vclk: 54000 dclk: 40000
    [    2.667225]          power level 0    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667227]          power level 1    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667228]          power level 2    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667230]  status: 
    [    2.667231] == power state 4 ==
    [    2.667232]  ui class: performance
    [    2.667233]  internal class: none
    [    2.667235]  caps: video 
    [    2.667237]  uvd    vclk: 0 dclk: 0
    [    2.667238]          power level 0    sclk: 30000 mclk: 50000 vddc: 1200
    [    2.667240]          power level 1    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667241]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667242]  status: 
    [    2.667244] == power state 5 ==
    [    2.667245]  ui class: battery
    [    2.667246]  internal class: none
    [    2.667248]  caps: video 
    [    2.667249]  uvd    vclk: 0 dclk: 0
    [    2.667251]          power level 0    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667253]          power level 1    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667254]          power level 2    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667255]  status: 
    [    2.667257] == power state 6 ==
    [    2.667258]  ui class: none
    [    2.667259]  internal class: uvd_hd 
    [    2.667261]  caps: video 
    [    2.667262]  uvd    vclk: 40000 dclk: 30000
    [    2.667264]          power level 0    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667266]          power level 1    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667267]          power level 2    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667268]  status: 
    [    2.667270] == power state 7 ==
    [    2.667271]  ui class: none
    [    2.667272]  internal class: uvd_sd 
    [    2.667273]  caps: video 
    [    2.667275]  uvd    vclk: 10000 dclk: 10000
    [    2.667277]          power level 0    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667278]          power level 1    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667280]          power level 2    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667281]  status:
    any ideas why there's no difference?

  5. #85
    Join Date
    Jan 2014
    Posts
    5

    Wink effective power management with DPM?

    I have a question concerning this DPM thing:
    I think I managed to set everything up correctly on my 3.12.6 kernel (at least, so it seems).
    I have a RV710 in my laptop (mobile radeon 4570)
    DPM talks about 7 different profiles..
    but when I switch from battery - balanced - performance using this command:
    Code:
    echo (profile) > /sys/class/drm/card0/device/power_dpm_state
    and monitor the frequency information with this tool:
    Code:
    while(true) do sleep 5; cat /sys/kernel/debug/dri/64/radeon_pm_info; done
    I see no difference at all; I tried:
    - doing nothing in KDE
    - doing nothing in XFCE
    - running glxgears
    - decoding a h264 movie using mplayer and vdpau

    and for every profile, I came to the conclusion: the max performance is 680mhz core and 500mhz memory, and minimal is 220 mhz core and 250 mhz memory
    test was done on AC power

    dpm output:
    Code:
    [    2.667173] == power state 0 ==
    [    2.667175]  ui class: none
    [    2.667178]  internal class: boot 
    [    2.667180]  caps: video 
    [    2.667182]  uvd    vclk: 0 dclk: 0
    [    2.667185]          power level 0    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667186]          power level 1    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667188]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667189]  status: c r b 
    [    2.667191] == power state 1 ==
    [    2.667192]  ui class: performance
    [    2.667194]  internal class: none
    [    2.667195]  caps: single_disp video 
    [    2.667198]  uvd    vclk: 0 dclk: 0
    [    2.667199]          power level 0    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667201]          power level 1    sclk: 30000 mclk: 50000 vddc: 950
    [    2.667202]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667203]  status: 
    [    2.667205] == power state 2 ==
    [    2.667206]  ui class: battery
    [    2.667207]  internal class: none
    [    2.667208]  caps: single_disp video 
    [    2.667210]  uvd    vclk: 0 dclk: 0
    [    2.667212]          power level 0    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667214]          power level 1    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667215]          power level 2    sclk: 30000 mclk: 25000 vddc: 950
    [    2.667216]  status: 
    [    2.667218] == power state 3 ==
    [    2.667219]  ui class: none
    [    2.667220]  internal class: uvd 
    [    2.667222]  caps: video 
    [    2.667224]  uvd    vclk: 54000 dclk: 40000
    [    2.667225]          power level 0    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667227]          power level 1    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667228]          power level 2    sclk: 60000 mclk: 50000 vddc: 1200
    [    2.667230]  status: 
    [    2.667231] == power state 4 ==
    [    2.667232]  ui class: performance
    [    2.667233]  internal class: none
    [    2.667235]  caps: video 
    [    2.667237]  uvd    vclk: 0 dclk: 0
    [    2.667238]          power level 0    sclk: 30000 mclk: 50000 vddc: 1200
    [    2.667240]          power level 1    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667241]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667242]  status: 
    [    2.667244] == power state 5 ==
    [    2.667245]  ui class: battery
    [    2.667246]  internal class: none
    [    2.667248]  caps: video 
    [    2.667249]  uvd    vclk: 0 dclk: 0
    [    2.667251]          power level 0    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667253]          power level 1    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667254]          power level 2    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667255]  status: 
    [    2.667257] == power state 6 ==
    [    2.667258]  ui class: none
    [    2.667259]  internal class: uvd_hd 
    [    2.667261]  caps: video 
    [    2.667262]  uvd    vclk: 40000 dclk: 30000
    [    2.667264]          power level 0    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667266]          power level 1    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667267]          power level 2    sclk: 45000 mclk: 40000 vddc: 1200
    [    2.667268]  status: 
    [    2.667270] == power state 7 ==
    [    2.667271]  ui class: none
    [    2.667272]  internal class: uvd_sd 
    [    2.667273]  caps: video 
    [    2.667275]  uvd    vclk: 10000 dclk: 10000
    [    2.667277]          power level 0    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667278]          power level 1    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667280]          power level 2    sclk: 30000 mclk: 40000 vddc: 950
    [    2.667281]  status:
    any ideas why there's no difference?

  6. #86
    Join Date
    Jun 2014
    Posts
    4

    Default

    Quote Originally Posted by agd5f View Post
    You don't need any new ucode for power management on that chip, but you still need the ucode for the CP, RLC, and UVD.
    Well i do not get it. So what do i need, where to get it and how to install it? (or tell me where to read about, please)

    I have AMD A4-4355M APU (hate it) on Samsung NP535U3C (do not like it too...).

    I use quite recent version of kernel (3.14.7-031407-generic #201406111644 on Mint 16), Gallium 0.4 on AMD Aruba, Mesa 10.3.0-devel
    Drivers are from Xorg-Edgers PPA.

    I have installed linux-firmware so ARUBA*bin are present.

    My dmesg is quite long so i had to cut it off... alot:
    Code:
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] SMBIOS 2.7 present.
    [    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 535U3C/NP535U3C-A01PL, BIOS P07RAS.W73.130411.LEO 04/11/2013
    
    [    0.000000] ACPI: SSDT 000000009e4ed2a8 000470 (v01 AMD    POWERNOW 00000001 AMD  00000001)
    [    0.000000] ACPI: SSDT 000000009e4ed718 001ECC (v02    AMD     ALIB 00000001 MSFT 04000000)
    
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.7-031407-generic root=UUID=bbb97108-4e03-43a2-be26-ed6381f4e705 ro quiet splash pcie_aspm=force radeon.dpm=1 vt.handoff=7
    
    
    [    0.000000] tsc: Detected 1896.568 MHz processor
    [    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.13 BogoMIPS (lpj=7586272)
    
    [    0.023764] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
    
    [    0.082351] smpboot: CPU0: AMD A4-4355M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [    0.190362] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [    0.190370] ... version:                0
    [    0.190372] ... bit width:              48
    [    0.190374] ... generic registers:      6
    [    0.190375] ... value mask:             0000ffffffffffff
    [    0.190377] ... max period:             00007fffffffffff
    [    0.190379] ... fixed-purpose events:   0
    [    0.190381] ... event mask:             000000000000003f
    [    0.192806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.192954] x86: Booting SMP configuration:
    [    0.192957] .... node  #0, CPUs:      #1
    [    0.203912] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
    [    0.206096] x86: Booted up 1 node, 2 CPUs
    
    [    0.232330] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.235754] ACPI: Interpreter enabled
    [    0.235765] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [    0.235774] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [    0.235806] ACPI: (supports S0 S3 S4 S5)
    
    [    0.319461] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [    0.319500] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [    0.333207] ACPI: \_PR_.P002: failed to get CPU APIC ID.
    [    0.333217] ACPI: \_PR_.P003: failed to get CPU APIC ID.
    
    [    1.967840] [drm] radeon kernel modesetting enabled.
    [    1.986815] wmi: Mapper loaded
    [    1.987464] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
    [    1.987612] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [    1.988035] acpi device:40: registered as cooling_device2
    [    1.988153] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5
    
    [    1.994374] checking generic (c0000000 420000) vs hw (c0000000 10000000)
    [    1.994378] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [    1.994403] Console: switching to colour dummy device 80x25
    [    2.031488] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9994 0x144D:0xC660).
    [    2.031537] [drm] register mmio base: 0xFEB00000
    [    2.031539] [drm] register mmio size: 262144
    [    2.031627] ATOM BIOS: BR042452.006
    [    2.031732] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [    2.031736] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [    2.031739] [drm] Detected VRAM RAM=512M, BAR=256M
    [    2.031741] [drm] RAM width 32bits DDR
    [    2.031856] [TTM] Zone  kernel: Available graphics memory: 1720386 kiB
    [    2.031859] [TTM] Initializing pool allocator
    [    2.031867] [TTM] Initializing DMA pool allocator
    [    2.031895] [drm] radeon: 512M of VRAM memory ready
    [    2.031897] [drm] radeon: 1024M of GTT memory ready.
    [    2.031917] [drm] Loading ARUBA Microcode
    [    2.032009] [drm] Internal thermal controller without fan control
    [    2.032070] == power state 0 ==
    [    2.032072] 	ui class: none
    [    2.032074] 	internal class: uvd_sd 
    [    2.032077] 	caps: 
    [    2.032079] 	uvd    vclk: 30000 dclk: 24828
    [    2.032112] 		power level 0    sclk: 20000 vddc: 899
    [    2.032115] 		power level 1    sclk: 32728 vddc: 924
    [    2.032116] 	status: 
    [    2.032119] == power state 1 ==
    [    2.032120] 	ui class: none
    [    2.032123] 	internal class: uvd_hd 
    [    2.032125] 	caps: 
    [    2.032128] 	uvd    vclk: 40000 dclk: 30000
    [    2.032131] 		power level 0    sclk: 32728 vddc: 924
    [    2.032132] 	status: 
    [    2.032135] == power state 2 ==
    [    2.032136] 	ui class: none
    [    2.032138] 	internal class: uvd 
    [    2.032141] 	caps: 
    [    2.032143] 	uvd    vclk: 55385 dclk: 41143
    [    2.032146] 		power level 0    sclk: 32728 vddc: 924
    [    2.032149] 		power level 1    sclk: 42353 vddc: 987
    [    2.032151] 	status: 
    [    2.032153] == power state 3 ==
    [    2.032154] 	ui class: none
    [    2.032156] 	internal class: uvd_mvc 
    [    2.032160] 	caps: 
    [    2.032163] 	uvd    vclk: 55385 dclk: 41143
    [    2.032166] 		power level 0    sclk: 32728 vddc: 924
    [    2.032168] 		power level 1    sclk: 42353 vddc: 987
    [    2.032169] 	status: 
    [    2.032171] == power state 4 ==
    [    2.032172] 	ui class: battery
    [    2.032174] 	internal class: none
    [    2.032176] 	caps: 
    [    2.032178] 	uvd    vclk: 0 dclk: 0
    [    2.032180] 		power level 0    sclk: 20000 vddc: 899
    [    2.032183] 		power level 1    sclk: 32728 vddc: 924
    [    2.032184] 	status: 
    [    2.032186] == power state 5 ==
    [    2.032187] 	ui class: performance
    [    2.032189] 	internal class: none
    [    2.032191] 	caps: 
    [    2.032192] 	uvd    vclk: 0 dclk: 0
    [    2.032195] 		power level 0    sclk: 20000 vddc: 899
    [    2.032197] 		power level 1    sclk: 32728 vddc: 924
    [    2.032200] 		power level 2    sclk: 42353 vddc: 987
    [    2.032201] 	status: 
    [    2.032203] == power state 6 ==
    [    2.032204] 	ui class: none
    [    2.032206] 	internal class: boot 
    [    2.032208] 	caps: 
    [    2.032209] 	uvd    vclk: 0 dclk: 0
    [    2.032212] 		power level 0    sclk: 20000 vddc: 987
    [    2.032213] 	status: c r b 
    [    2.032217] == power state 7 ==
    [    2.032218] 	ui class: none
    [    2.032219] 	internal class: thermal 
    [    2.032221] 	caps: 
    [    2.032223] 	uvd    vclk: 0 dclk: 0
    [    2.032226] 		power level 0    sclk: 20000 vddc: 899
    [    2.032227] 	status: 
    [    2.032372] [drm] radeon: dpm initialized
    [    2.032795] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [    2.047279] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
    [    2.047450] radeon 0000:00:01.0: WB enabled
    [    2.047455] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801386dec00
    [    2.048187] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90010d35a18
    [    2.048190] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801386dec04
    [    2.048194] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801386dec08
    [    2.048197] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801386dec0c
    [    2.048200] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8801386dec10
    [    2.048204] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    2.048206] [drm] Driver supports precise vblank timestamp query.
    [    2.048235] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
    [    2.048252] radeon 0000:00:01.0: radeon: using MSI.
    [    2.048532] [drm] radeon: irq initialized.
    [    2.067989] [drm] ring test on 0 succeeded in 2 usecs
    [    2.068052] [drm] ring test on 3 succeeded in 2 usecs
    [    2.068061] [drm] ring test on 4 succeeded in 1 usecs
    [    2.123702] [drm] ring test on 5 succeeded in 1 usecs
    [    2.143639] [drm] UVD initialized successfully.
    [    2.146709] [drm] ib test on ring 0 succeeded in 0 usecs
    [    2.147244] [drm] ib test on ring 3 succeeded in 0 usecs
    [    2.147773] [drm] ib test on ring 4 succeeded in 1 usecs
    [    2.168596] [drm] ib test on ring 5 succeeded
    [    2.174743] usb 2-2: new high-speed USB device number 3 using ehci-pci
    [    2.201197] [drm] radeon atom DIG backlight initialized
    [    2.201202] [drm] Radeon Display Connectors
    [    2.201204] [drm] Connector 0:
    [    2.201207] [drm]   HDMI-A-1
    [    2.201209] [drm]   HPD1
    [    2.201212] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
    [    2.201213] [drm]   Encoders:
    [    2.201216] [drm]     DFP1: INTERNAL_UNIPHY2
    [    2.201217] [drm] Connector 1:
    [    2.201219] [drm]   VGA-1
    [    2.201220] [drm]   HPD2
    [    2.201223] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
    [    2.201224] [drm]   Encoders:
    [    2.201226] [drm]     CRT1: INTERNAL_UNIPHY2
    [    2.201227] [drm]     CRT1: NUTMEG
    [    2.201229] [drm] Connector 2:
    [    2.201231] [drm]   LVDS-1
    [    2.201232] [drm]   HPD3
    [    2.201235] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
    [    2.201236] [drm]   Encoders:
    [    2.201238] [drm]     LCD1: INTERNAL_UNIPHY
    [    2.201239] [drm]     LCD1: TRAVIS
    [    2.230722] tsc: Refined TSC clocksource calibration: 1896.548 MHz
    [    2.310775] switching from power state:
    [    2.310781] 	ui class: none
    [    2.310784] 	internal class: boot 
    [    2.310787] 	caps: 
    [    2.310790] 	uvd    vclk: 0 dclk: 0
    [    2.310795] 		power level 0    sclk: 20000 vddc: 987
    [    2.310797] 	status: c b 
    [    2.310800] switching to power state:
    [    2.310802] 	ui class: performance
    [    2.310804] 	internal class: none
    [    2.310806] 	caps: 
    [    2.310808] 	uvd    vclk: 0 dclk: 0
    [    2.310811] 		power level 0    sclk: 20000 vddc: 899
    [    2.310814] 		power level 1    sclk: 32728 vddc: 924
    [    2.310816] 		power level 2    sclk: 42353 vddc: 987
    [    2.310818] 	status: r 
    
    [    2.463389] [drm] fb mappable at 0xC1488000
    [    2.463395] [drm] vram apper at 0xC0000000
    [    2.463397] [drm] size 4325376
    [    2.463399] [drm] fb depth is 24
    [    2.463401] [drm]    pitch is 5632
    [    2.463582] fbcon: radeondrmfb (fb0) is primary device
    
    [    2.910924] Console: switching to colour frame buffer device 170x48
    [    2.914337] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [    2.914340] radeon 0000:00:01.0: registered panic notifier
    [    2.935380] [drm] Initialized radeon 2.37.0 20080528 for 0000:00:01.0 on minor 0
    [    3.230952] Switched to clocksource tsc
    
    [    9.412359] init: Failed to spawn click-system-hooks main process: unable to execute: No such file or directory
    
    [    9.796296] microcode: CPU0: patch_level=0x06001116
    [    9.826067] microcode: CPU0: new patch_level=0x06001119
    
    [   10.182178] microcode: CPU1: patch_level=0x06001116
    [   10.182366] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    
    [   10.351368] samsung_laptop: detected SABI interface: SwSmi@
    [   10.351377] samsung_laptop: Backlight controlled by ACPI video driver
    
    [   10.930543] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
    
    [ 1846.126666] switching from power state:
    [ 1846.126676] 	ui class: performance
    [ 1846.126680] 	internal class: none
    [ 1846.126684] 	caps: 
    [ 1846.126689] 	uvd    vclk: 0 dclk: 0
    [ 1846.126696] 		power level 0    sclk: 20000 vddc: 899
    [ 1846.126701] 		power level 1    sclk: 32728 vddc: 924
    [ 1846.126705] 		power level 2    sclk: 42353 vddc: 987
    [ 1846.126708] 	status: c 
    [ 1846.126712] switching to power state:
    [ 1846.126715] 	ui class: battery
    [ 1846.126718] 	internal class: none
    [ 1846.126722] 	caps: 
    [ 1846.126725] 	uvd    vclk: 0 dclk: 0
    [ 1846.126729] 		power level 0    sclk: 20000 vddc: 899
    [ 1846.126733] 		power level 1    sclk: 32728 vddc: 924
    [ 1846.126735] 	status: r
    ...and not sure if it is interesting but this might be (Xorg.0.log):

  7. #87
    Join Date
    Jun 2014
    Posts
    4

    Default

    Code:
    [    22.855] 
    X.Org X Server 1.14.6
    Release Date: 2014-04-13
    [    22.855] X Protocol Version 11, Revision 0
    [    22.855] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
    [    22.855] Current Operating System: Linux sammie 3.14.7-031407-generic #201406111644 SMP Wed Jun 11 20:45:35 UTC 2014 x86_64
    [    22.855] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.7-031407-generic root=UUID=bbb97108-4e03-43a2-be26-ed6381f4e705 ro quiet splash pcie_aspm=force radeon.dpm=1 vt.handoff=7
    [    22.855] Build Date: 01 May 2014  09:47:30PM
    [    22.855] xorg-server 2:1.14.6-0ubuntu1 (For technical support please see http://www.ubuntu.com/support) 
    [    22.855] Current version of pixman: 0.30.2
    
    [    22.863] (==) Automatically adding devices
    [    22.863] (==) Automatically enabling devices
    [    22.863] (==) Automatically adding GPU devices
    
    [    22.865] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    22.865] (II) The server relies on udev to provide the list of input devices.
            If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    22.865] (II) Loader magic: 0x7fef822bbd20
    [    22.865] (II) Module ABI versions:
    [    22.865]    X.Org ANSI C Emulation: 0.4
    [    22.865]    X.Org Video Driver: 14.1
    [    22.865]    X.Org XInput driver : 19.1
    [    22.865]    X.Org Server Extension : 7.0
    [    22.866] (II) xfree86: Adding drm device (/dev/dri/card0)
    [    22.868] (--) PCI:*(0:0:1:0) 1002:9994:144d:c660 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
    [    22.868] (II) Open ACPI successful (/var/run/acpid.socket)
    [    22.870] Initializing built-in extension Generic Event Extension
    [    22.870] Initializing built-in extension SHAPE
    [    22.870] Initializing built-in extension MIT-SHM
    [    22.870] Initializing built-in extension XInputExtension
    [    22.870] Initializing built-in extension XTEST
    [    22.870] Initializing built-in extension BIG-REQUESTS
    [    22.870] Initializing built-in extension SYNC
    [    22.870] Initializing built-in extension XKEYBOARD
    [    22.870] Initializing built-in extension XC-MISC
    [    22.870] Initializing built-in extension SECURITY
    [    22.870] Initializing built-in extension XINERAMA
    [    22.870] Initializing built-in extension XFIXES
    [    22.870] Initializing built-in extension RENDER
    [    22.870] Initializing built-in extension RANDR
    [    22.870] Initializing built-in extension COMPOSITE
    [    22.870] Initializing built-in extension DAMAGE
    [    22.870] Initializing built-in extension MIT-SCREEN-SAVER
    [    22.870] Initializing built-in extension DOUBLE-BUFFER
    [    22.870] Initializing built-in extension RECORD
    [    22.870] Initializing built-in extension DPMS
    [    22.870] Initializing built-in extension X-Resource
    [    22.870] Initializing built-in extension XVideo
    [    22.870] Initializing built-in extension XVideo-MotionCompensation
    [    22.870] Initializing built-in extension SELinux
    [    22.870] Initializing built-in extension XFree86-VidModeExtension
    [    22.870] Initializing built-in extension XFree86-DGA
    [    22.870] Initializing built-in extension XFree86-DRI
    [    22.870] Initializing built-in extension DRI2
    [    22.871] (II) "glx" will be loaded by default.
    [    22.871] (WW) "xmir" is not to be loaded by default. Skipping.
    [    22.871] (II) LoadModule: "dri2"
    [    22.871] (II) Module "dri2" already built-in
    [    22.871] (II) LoadModule: "glamoregl"
    [    22.875] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [    22.890] (II) Module glamoregl: vendor="X.Org Foundation"
    [    22.890]    compiled for 1.14.5, module version = 0.6.0
    [    22.890]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    22.890] (II) LoadModule: "glx"
    [    22.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    22.892] (II) Module glx: vendor="X.Org Foundation"
    [    22.892]    compiled for 1.14.6, module version = 1.0.0
    [    22.892]    ABI class: X.Org Server Extension, version 7.0
    [    22.892] (==) AIGLX enabled
    [    22.893] Loading extension GLX
    [    22.893] (==) Matched fglrx as autoconfigured driver 0
    [    22.893] (==) Matched ati as autoconfigured driver 1
    [    22.893] (==) Matched fglrx as autoconfigured driver 2
    [    22.893] (==) Matched ati as autoconfigured driver 3
    [    22.893] (==) Matched vesa as autoconfigured driver 4
    [    22.893] (==) Matched modesetting as autoconfigured driver 5
    [    22.893] (==) Matched fbdev as autoconfigured driver 6
    [    22.893] (==) Assigned the driver to the xf86ConfigLayout
    [    22.893] (II) LoadModule: "fglrx"
    [    22.894] (WW) Warning, couldn't open module fglrx
    [    22.894] (II) UnloadModule: "fglrx"
    [    22.894] (II) Unloading fglrx
    [    22.894] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [    22.894] (II) LoadModule: "ati"
    [    22.895] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [    22.895] (II) Module ati: vendor="X.Org Foundation"
    [    22.895]    compiled for 1.14.5, module version = 7.4.99
    [    22.895]    Module class: X.Org Video Driver
    [    22.895]    ABI class: X.Org Video Driver, version 14.1
    [    22.895] (II) LoadModule: "radeon"
    [    22.896] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [    22.899] (II) Module radeon: vendor="X.Org Foundation"
    [    22.899]    compiled for 1.14.5, module version = 7.4.99
    [    22.899]    Module class: X.Org Video Driver
    [    22.899]    ABI class: X.Org Video Driver, version 14.1
    [    22.899] (II) LoadModule: "vesa"
    [    22.900] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    22.901] (II) Module vesa: vendor="X.Org Foundation"
    [    22.901]    compiled for 1.14.1, module version = 2.3.2
    [    22.901]    Module class: X.Org Video Driver
    [    22.901]    ABI class: X.Org Video Driver, version 14.1
    [    22.901] (II) LoadModule: "modesetting"
    [    22.901] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [    22.902] (II) Module modesetting: vendor="X.Org Foundation"
    [    22.902]    compiled for 1.14.1, module version = 0.8.0
    [    22.902]    Module class: X.Org Video Driver
    [    22.902]    ABI class: X.Org Video Driver, version 14.1
    [    22.902] (II) LoadModule: "fbdev"
    [    22.902] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    22.903] (II) Module fbdev: vendor="X.Org Foundation"
    [    22.903]    compiled for 1.14.1, module version = 0.4.3
    [    22.903]    Module class: X.Org Video Driver
    [    22.903]    ABI class: X.Org Video Driver, version 14.1
    [    22.903] (==) Matched fglrx as autoconfigured driver 0
    [    22.903] (==) Matched ati as autoconfigured driver 1
    [    22.903] (==) Matched fglrx as autoconfigured driver 2
    [    22.904] (==) Matched ati as autoconfigured driver 3
    [    22.904] (==) Matched vesa as autoconfigured driver 4
    [    22.904] (==) Matched modesetting as autoconfigured driver 5
    [    22.904] (==) Matched fbdev as autoconfigured driver 6
    [    22.904] (==) Assigned the driver to the xf86ConfigLayout
    [    22.904] (II) LoadModule: "fglrx"
    [    22.905] (WW) Warning, couldn't open module fglrx
    [    22.905] (II) UnloadModule: "fglrx"
    [    22.905] (II) Unloading fglrx
    [    22.905] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [    22.905] (II) LoadModule: "ati"
    [    22.905] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [    22.905] (II) Module ati: vendor="X.Org Foundation"
    [    22.905]    compiled for 1.14.5, module version = 7.4.99
    [    22.905]    Module class: X.Org Video Driver
    [    22.905]    ABI class: X.Org Video Driver, version 14.1
    [    22.905] (II) LoadModule: "vesa"
    [    22.906] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    22.906] (II) Module vesa: vendor="X.Org Foundation"
    [    22.906]    compiled for 1.14.1, module version = 2.3.2
    [    22.906]    Module class: X.Org Video Driver
    [    22.906]    ABI class: X.Org Video Driver, version 14.1
    [    22.906] (II) UnloadModule: "vesa"
    [    22.906] (II) Unloading vesa
    [    22.906] (II) Failed to load module "vesa" (already loaded, 0)
    [    22.906] (II) LoadModule: "modesetting"
    [    22.906] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [    22.906] (II) Module modesetting: vendor="X.Org Foundation"
    [    22.906]    compiled for 1.14.1, module version = 0.8.0
    [    22.907]    Module class: X.Org Video Driver
    [    22.907]    ABI class: X.Org Video Driver, version 14.1
    [    22.907] (II) UnloadModule: "modesetting"
    [    22.907] (II) Unloading modesetting
    [    22.907] (II) Failed to load module "modesetting" (already loaded, 0)
    [    22.907] (II) LoadModule: "fbdev"
    [    22.907] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    22.907] (II) Module fbdev: vendor="X.Org Foundation"
    [    22.907]    compiled for 1.14.1, module version = 0.4.3
    [    22.907]    Module class: X.Org Video Driver
    [    22.907]    ABI class: X.Org Video Driver, version 14.1
    [    22.907] (II) UnloadModule: "fbdev"
    [    22.907] (II) Unloading fbdev
    [    22.907] (II) Failed to load module "fbdev" (already loaded, 0)
    [    22.907] (II) RADEON: Driver for ATI Radeon chipsets:
            ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
           
            HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [    22.923] (II) VESA: driver for VESA chipsets: vesa
    [    22.923] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [    22.923] (II) FBDEV: driver for framebuffer: fbdev
    [    22.923] (++) using VT number 8
    
    [    22.927] (II) [KMS] Kernel modesetting enabled.
    [    22.927] (WW) Falling back to old probe method for vesa
    [    22.927] (WW) Falling back to old probe method for modesetting
    [    22.927] (WW) Falling back to old probe method for fbdev
    [    22.927] (II) Loading sub module "fbdevhw"
    [    22.927] (II) LoadModule: "fbdevhw"
    [    22.928] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [    22.929] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    22.929]    compiled for 1.14.6, module version = 0.0.2
    [    22.929]    ABI class: X.Org Video Driver, version 14.1
    [    22.929] (II) RADEON(0): Creating default Display subsection in Screen section
            "Default Screen Section" for depth/fbbpp 24/32
    [    22.929] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [    22.929] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    22.929] (==) RADEON(0): Default visual is TrueColor
    [    22.929] (==) RADEON(0): RGB weight 888
    [    22.929] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [    22.929] (--) RADEON(0): Chipset: "ARUBA" (ChipID = 0x9994)
    [    22.929] (II) Loading sub module "dri2"
    [    22.929] (II) LoadModule: "dri2"
    [    22.929] (II) Module "dri2" already built-in
    [    22.929] (II) Loading sub module "exa"
    [    22.929] (II) LoadModule: "exa"
    [    22.930] (II) Loading /usr/lib/xorg/modules/libexa.so
    [    22.931] (II) Module exa: vendor="X.Org Foundation"
    [    22.931]    compiled for 1.14.6, module version = 2.6.0
    [    22.931]    ABI class: X.Org Video Driver, version 14.1
    [    22.931] (II) RADEON(0): KMS Color Tiling: enabled
    [    22.931] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [    22.931] (II) RADEON(0): KMS Pageflipping: enabled
    [    22.931] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [    22.934] (II) RADEON(0): Output HDMI-0 has no monitor section
    [    23.102] (II) RADEON(0): Output VGA-0 has no monitor section
    [    23.107] (II) RADEON(0): Output LVDS has no monitor section
    [    23.110] (II) RADEON(0): EDID for output HDMI-0
    [    23.278] (II) RADEON(0): EDID for output VGA-0
    [    23.283] (II) RADEON(0): EDID for output LVDS
    [    23.283] (II) RADEON(0): Manufacturer: SEC  Model: 3246  Serial#: 0
    [    23.283] (II) RADEON(0): Year: 2011  Week: 0
    [    23.283] (II) RADEON(0): EDID Version: 1.3
    [    23.283] (II) RADEON(0): Digital Display Input
    [    23.283] (II) RADEON(0): Max Image Size [cm]: horiz.: 29  vert.: 16
    [    23.283] (II) RADEON(0): Gamma: 2.20
    [    23.283] (II) RADEON(0): No DPMS capabilities specified
    [    23.283] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    [    23.283] (II) RADEON(0): First detailed timing is preferred mode
    [    23.283] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
    [    23.283] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
    [    23.283] (II) RADEON(0): Manufacturer's mask: 0
    [    23.283] (II) RADEON(0): Supported detailed timing:
    [    23.283] (II) RADEON(0): clock: 70.7 MHz   Image Size:  293 x 165 mm
    [    23.283] (II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
    [    23.283] (II) RADEON(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
    [    23.283] (II) RADEON(0): Unknown vendor-specific block f
    [    23.283] (II) RADEON(0):  SAMSUNG
    [    23.283] (II) RADEON(0):  LTN133AT23801
    [    23.283] (II) RADEON(0): EDID (in hex):
    [    23.283] (II) RADEON(0):    00ffffffffffff004ca3463200000000
    [    23.283] (II) RADEON(0):    00150103801d10780a87f594574f8c27
    [    23.283] (II) RADEON(0):    27505400000001010101010101010101
    [    23.283] (II) RADEON(0):    0101010101019e1b5678500018303020
    [    23.283] (II) RADEON(0):    250025a5100000190000000f00000000
    [    23.283] (II) RADEON(0):    00000000001eb4027400000000fe0053
    [    23.283] (II) RADEON(0):    414d53554e470a2020202020000000fe
    [    23.283] (II) RADEON(0):    004c544e313333415432333830310059
    [    23.284] (II) RADEON(0): Printing probed modes for output LVDS
    [    23.284] (II) RADEON(0): Modeline "1366x768"x60.1   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
    
    [    23.284] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
    [    23.284] (II) RADEON(0): Output HDMI-0 disconnected
    [    23.284] (II) RADEON(0): Output VGA-0 disconnected
    [    23.284] (II) RADEON(0): Output LVDS connected
    [    23.284] (II) RADEON(0): Using exact sizes for initial modes
    [    23.284] (II) RADEON(0): Output LVDS using initial mode 1366x768
    [    23.284] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [    23.284] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:20000000 visible:1fba0000
    [    23.284] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [    23.284] (==) RADEON(0): DPI set to (96, 96)
    [    23.284] (II) Loading sub module "fb"
    [    23.284] (II) LoadModule: "fb"
    [    23.285] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    23.287] (II) Module fb: vendor="X.Org Foundation"
    [    23.287]    compiled for 1.14.6, module version = 1.0.0
    [    23.288]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    23.288] (II) Loading sub module "ramdac"
    [    23.288] (II) LoadModule: "ramdac"
    [    23.288] (II) Module "ramdac" already built-in
    [    23.288] (II) UnloadModule: "vesa"
    [    23.288] (II) Unloading vesa
    [    23.288] (II) UnloadModule: "modesetting"
    [    23.288] (II) Unloading modesetting
    [    23.288] (II) UnloadModule: "fbdev"
    [    23.288] (II) Unloading fbdev
    [    23.288] (II) UnloadSubModule: "fbdevhw"
    [    23.288] (II) Unloading fbdevhw
    [    23.288] (--) Depth 24 pixmap format is 32 bpp
    [    23.288] (II) RADEON(0): [DRI2] Setup complete
    [    23.288] (II) RADEON(0): [DRI2]   DRI driver: r600
    [    23.288] (II) RADEON(0): [DRI2]   VDPAU driver: r600
    [    23.289] (II) RADEON(0): Front buffer size: 4128K
    [    23.289] (II) RADEON(0): VRAM usage limit set to 464054K
    [    23.290] (==) RADEON(0): Backing store disabled
    [    23.290] (II) RADEON(0): Direct rendering enabled
    [    23.290] (II) EXA(0): Driver allocated offscreen pixmaps
    [    23.290] (II) EXA(0): Driver registered support for the following operations:
    [    23.290] (II)         Solid
    [    23.290] (II)         Copy
    [    23.290] (II)         Composite (RENDER acceleration)
    [    23.290] (II)         UploadToScreen
    [    23.290] (II)         DownloadFromScreen
    [    23.290] (II) RADEON(0): Acceleration enabled
    [    23.290] (==) RADEON(0): DPMS enabled
    [    23.290] (==) RADEON(0): Silken mouse enabled
    [    23.290] (II) RADEON(0): Set up textured video
    [    23.291] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [    23.291] (II) RADEON(0): [XvMC] Extension initialized.
    [    23.291] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    23.292] (--) RandR disabled
    [    23.307] (II) SELinux: Disabled on system
    [    23.391] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    23.391] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    23.391] (II) AIGLX: enabled GLX_ARB_create_context
    [    23.391] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [    23.391] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [    23.391] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    23.391] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    23.393] (II) AIGLX: Loaded and initialized r600
    [    23.393] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    23.780] (II) RADEON(0): Setting screen physical size to 361 x 203
    [    23.804] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    
    [    23.814] (II) Module evdev: vendor="X.Org Foundation"
    [    23.814]    compiled for 1.14.1, module version = 2.7.3
    [    23.814]    Module class: X.Org XInput Driver
    [    23.814]    ABI class: X.Org XInput driver, version 19.1
    
    [    23.821] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
    [    23.823] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [    23.823] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    23.823] (II) Using input driver 'evdev' for 'Video Bus'
    [    23.823] (**) Video Bus: always reports core events
    [    23.823] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [    23.823] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [    23.823] (--) evdev: Video Bus: Found keys
    [    23.823] (II) evdev: Video Bus: Configuring as keyboard
    [    23.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5/event4"
    [    23.823] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    
    [    23.826] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    [    23.826] (II) No input driver specified, ignoring this device.
    [    23.826] (II) This device may have been added with another device file.
    [    23.826] (II) config/udev: Adding drm device (/dev/dri/card0)
    [    23.826] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
    [    23.827] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
    [    23.827] (II) No input driver specified, ignoring this device.
    [    23.827] (II) This device may have been added with another device file.
    [
    [    24.271] (II) XKB: reuse xkmfile /var/lib/xkb/server-CB537B66032B0DBE0AE956F537017A59DB020654.xkm
    [    28.238] (II) RADEON(0): EDID vendor "SEC", prod id 12870
    [    28.239] (II) RADEON(0): Printing DDC gathered Modelines:
    [    28.239] (II) RADEON(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
    [    28.451] (II) RADEON(0): EDID vendor "SEC", prod id 12870
    
    [   264.331] (II) RADEON(0): Printing DDC gathered Modelines:
    [   264.331] (II) RADEON(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
    What else can i do?
    Some people reports power ussage for about 0.5%/min, while i, forcing cpu to stay at lowwest speed can get usually 0.9-1% per minute.

    Please help!

  8. #88
    Join Date
    Jun 2014
    Posts
    4

    Default

    Sorry for splitting posts, but it was too long =/


    ----------

    Jsollie, there is a diffrence, for example (from Your log):
    Code:
    [    2.667173] == power state 0 ==
    [    2.667175]  ui class: none
    [    2.667178]  internal class: boot 
    [    2.667180]  caps: video 
    [    2.667182]  uvd    vclk: 0 dclk: 0
    [    2.667185]          power level 0    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667186]          power level 1    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667188]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    [    2.667189]  status: c r b 
    [    2.667191] == power state 1 ==
    [    2.667192]  ui class: performance
    [    2.667194]  internal class: none
    [    2.667195]  caps: single_disp video 
    [    2.667198]  uvd    vclk: 0 dclk: 0
    [    2.667199]          power level 0    sclk: 22000 mclk: 25000 vddc: 950
    [    2.667201]          power level 1    sclk: 30000 mclk: 50000 vddc: 950
    [    2.667202]          power level 2    sclk: 68000 mclk: 50000 vddc: 1200
    at 0 (boot) Your gpu is forced to use maximum (or high) frequency at all level while on 1 (performance) it cat switch from high sclk(clock) to low (and change vddc too - voltage i suppose).

    Regards!

  9. #89
    Join Date
    Jun 2014
    Posts
    4

    Default

    Since i can not edit my previous post (waiting for admin), jsollie, look here: http://askubuntu.com/questions/11514...rofile-at-boot

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •