Hello, I have a problem. Last week I have install Ubuntu 8.04 and it was working with no problem. I was surprise because a lot of french user had problems with X.org.

Now, I start my computer and Tabarslac! my X.org do not work and I have a window to change the settings of xorg.conf. My? It was workink last week? So, I set fglrx on the driver and I set my screen. After, I restart my computer and it work.

Now, I have this xorg.conf. It look like a dump!

Before
Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"ca"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Driver		"fglrx"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	Defaultdepth	24
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
EndSection
Section "Module"
	Load		"glx"
EndSection
Now

Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Boardname	"ATI Radeon (fglrx)"
	Busid		"PCI:1:0:1"
	Driver		"fglrx"
	Screen	0
	Vendorname	"ATI"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	Vendorname	"Plug 'n' Play"
	Modelname	"Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Configured Video Device"
	Monitor		"Configured Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	640	480
		Modes		"640x480@60"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "screen1" 0 0
EndSection
Section "Module"
	Load		"glx"
	Load		"dbe"
	Load		"dri"
	Load		"v4l"
EndSection
Section "device" # 
	Identifier	"device1"
	Boardname	"ATI Radeon (fglrx)"
	Busid		"PCI:1:0:0"
	Driver		"fglrx"
	Screen	0
	Vendorname	"ATI"
EndSection
Section "screen" # 
	Identifier	"screen1"
	Device		"device1"
	Defaultdepth	24
	Monitor		"monitor1"
	SubSection "Display"
		Depth	24
		Modes		"1280x1024@75"	"1280x960@60"	"1152x864@75"	"1280x1024@60"	"1024x768@60"	"1280x960@75"	"1024x768@70"	"1400x1050@60"	"1024x768@75"	"1400x1050@75"	"832x624@75"	"1600x1200@65"	"800x600@60"	"1600x1200@60"	"800x600@75"	"1792x1344@60"	"800x600@72"	"800x600@56"	"640x480@75"	"640x480@72"	"640x480@60"
	EndSubSection
EndSection
Section "monitor" # 
	Identifier	"monitor1"
	Vendorname	"BenQ"
	Modelname	"BenQ FP937s"
	Horizsync	31-83.0
	Vertrefresh	56.0-76.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
	Gamma	1.0
EndSection
Section "ServerFlags"
EndSection
I'me not very happy.

Can I change my new dump for my old nice xorg.conf?

Why does x.org do that? X.org is not automatic now?

Tank you,
Pier Luc