Results 1 to 5 of 5

Thread: x1950pro AGP - LinuxMCE - Alpha Blending

  1. #1
    Join Date
    Nov 2007
    Posts
    17

    Default x1950pro AGP - LinuxMCE - Alpha Blending

    I am trying to get LinuxMCE UI2 w/Alpha Blending to work (Their user interface)
    I am using the latest ATI driver, 8.4, and performed the manual install by creating .deb packages and installed that way. One thing i had to do was do a insmod fglrk.ko from the /lib/modules/$(-uname -r)/dkmp/misc (think that was the dir, where ever the file lives though) and then start up the program in order for the display to work properly.
    However, once it's working instead of alpha blending it just continuously flashes. So imaging your task bar in gnome/kde flashing on and off really fast.
    I am currently at work so i can't post my xorg.conf. however i can tell you that i have agilx=on, DRI loaded and direct rendering is working, i also have composite, render and damage = true. in the driver section, TV options for NTSC-M, overscan off, videooverlay=off, opengloverlay=on, xaanooffscreenpixles=true.
    (I will post actual xorg.conf once i get home)

  2. #2
    Join Date
    Nov 2007
    Posts
    17

    Default

    Here is my xorg.conf

    Code:
    # xorg.conf (xorg X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "ServerLayout"
    
    # Uncomment if you have a wacom tablet
    #	InputDevice     "stylus"	"SendCoreEvents"
    #	InputDevice     "cursor"	"SendCoreEvents"
    #	InputDevice     "eraser"	"SendCoreEvents"
    	Identifier     "Default Layout"
    	Screen      0  "aticonfig-Screen[0]" 0 0
    	InputDevice    "Generic Keyboard"
    	InputDevice    "Configured Mouse"
    EndSection
    
    Section "Files"
    EndSection
    
    Section "Module"
    	Load  "dbe"
    	Load  "dri"
    	Load  "glx"
    	Load  "extmod"
    	Load  "record"
    	Load  "xtrap"
    	Load  "speedo"
    	Load  "type1"
    	Load  "int10"
    	Load  "v4l"
    EndSection
    
    Section "ServerFlags"
    	Option	    "AIGLX" "on"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Generic Keyboard"
    	Driver      "kbd"
    	Option	    "CoreKeyboard"
    	Option	    "XkbRules" "xorg"
    	Option	    "XkbModel" "pc105"
    	Option	    "XkbLayout" "us"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Configured Mouse"
    	Driver      "mouse"
    	Option	    "CorePointer"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "Protocol" "ImPS/2"
    	Option	    "ZAxisMapping" "4 5"
    	Option	    "Emulate3Buttons" "true"
    EndSection
    
    Section "InputDevice"
    	Identifier  "stylus"
    	Driver      "wacom"
    	Option	    "Device" "/dev/input/wacom"
    	Option	    "Type" "stylus"
    	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
    	Identifier  "eraser"
    	Driver      "wacom"
    	Option	    "Device" "/dev/input/wacom"
    	Option	    "Type" "eraser"
    	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
    	Identifier  "cursor"
    	Driver      "wacom"
    	Option	    "Device" "/dev/input/wacom"
    	Option	    "Type" "cursor"
    	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[0]"
    	DisplaySize  508	244
    	HorizSync    20.0 - 500.0
    	VertRefresh  59.0 - 61.0
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[0]"
    	Driver      "fglrx"
    	Option	    "TVFormat" "NTSC-M"
    	#Option	    "TVStandard" "VIDEO"
    	Option	    "TVOverscan" "off"
    	Option	    "VideoOverlay" "on"
    	Option	    "OpenGLOverlay" "on"
    	Option	    "Capabilities" "0x00000800"
    	Option	    "FSAAEnable" "on"
    	Option	    "FSAAScale" "6"
    	Option	    "TexturedVideo" "on"
    	Option	    "TexturedXrender" "true"
    	Option	    "XAANoOffscreenPixmaps" "true"
    	#Option "renderAccel" "true"
    	VideoRam	524244
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[0]"
    	Device     "aticonfig-Device[0]"
    	Monitor    "aticonfig-Monitor[0]"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Modes    "1776x1000"
    	EndSubSection
    EndSection
    
    Section "DRI"
    	Group        "video"
    	Mode         0666
    EndSection
    
    Section "Extensions"
    	#Option	    "Composite" "true"
    	Option	    "RENDER" "true"
    	Option	    "DAMAGE" "true"
    EndSection

  3. #3
    Join Date
    Nov 2007
    Posts
    17

  4. #4
    Join Date
    May 2008
    Location
    Belgium
    Posts
    1

    Default

    Not that i'm able to help right away, but any progress so far ?

  5. #5
    Join Date
    Oct 2007
    Location
    Toronto-ish
    Posts
    7,578

    Default

    Do you have Compiz enabled by any chance ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •